1. Introducció
The Moman CP-S Motorcycle Intercom System is designed to provide clear and reliable communication for motorcyclists. Featuring advanced Bluetooth 5.1 technology, noise reduction, and a robust waterproof design, it enhances your riding experience by allowing group communication, music sharing, and hands-free phone calls.

Figure 1: Moman CP-S Intercom Unit with key features.
2. Contingut del paquet
The Moman CP-S package includes the following items:
- Moman CP-S Intercom Unit
- Headphone and Microphone Set
- Mounting Clip (for helmet edge)
- Adhesive Mount (for helmet surface)
- Cable de càrrega USB
- Interchangeable Decorative Shells (3 colors)
- Manual d'usuari
- Installation Tools (screwdriver)
3. Guia d'instal·lació
Proper installation ensures optimal performance and comfort. Follow these steps to install your Moman CP-S intercom system on your helmet.
3.1. Preparing the Helmet
- Remove the helmet's inner lining and cheek pads if they are removable. This provides easier access for speaker and microphone placement.
- Identify suitable locations for the speakers (near your ears) and the microphone (near your mouth).
3.2. Mounting the Intercom Unit
Choose between the clip mount or the adhesive mount based on your helmet type and preference.
Ús del suport de clip:
- Loosen the screws on the clip mount using the provided screwdriver.
- Slide the clip mount onto the bottom edge of your helmet, ensuring it is securely fastened.
- Tighten the screws to secure the clip mount in place.
Ús del suport adhesiu:
- Clean the desired mounting area on the side of your helmet thoroughly.
- Peel off the protective film from the adhesive mount and firmly press it onto the helmet surface for at least 30 seconds. Allow sufficient time for the adhesive to bond before attaching the intercom unit.
Attaching the Intercom Unit:
- Slide the Moman CP-S intercom unit onto the installed clip or adhesive mount until it clicks securely into place.
3.3. Instal·lació d'altaveus i micròfon
- Attach the adhesive pads to the back of the speakers.
- Carefully place the speakers inside the helmet, aligning them with your ears. Press firmly to secure.
- Attach the adhesive pad to the microphone.
- Position the microphone near your mouth, ensuring it is not obstructed by the helmet's padding.
- Connect the speaker and microphone cables to the appropriate ports on the intercom unit.
3.4. Gestió de cables
Tuck all excess cables neatly under the helmet's inner lining to prevent discomfort and ensure they do not interfere with helmet function. Reinstall any removed inner lining or cheek pads.
Video 1: Installation guide for Moman H2 Intercom (similar to CP-S).
4. Instruccions de funcionament
4.1. Encendre/apagar
- Encès: Press and hold the Power button for 3 seconds until the indicator light turns on.
- Apagar: Premeu i manteniu premut el botó d'engegada durant 3 segons fins que l'indicador lluminós s'apagui.
4.2. Emparellament Bluetooth
- With the device off, press and hold the Function button for 3 seconds. The red and blue indicator lights will flash, indicating pairing mode.
- On your mobile phone, enable Bluetooth and search for "FODSPORTS FX-S" (or similar device name). Select it to pair. The pairing is complete when the indicator light changes.
4.3. Reproducció de música
- Reproduir/pausa: Premeu breument el botó de funció.
- Següent cançó: Rotate the control knob forward once.
- Cançó anterior: Rotate the control knob backward once.
- Ajust de volum: Rotate the control knob forward or backward for 1 second to increase or decrease volume.

Figure 2: Music sharing feature between two riders.
4.4. Trucades telefòniques
- Respondre/Finalitzar la trucada: Premeu breument el botó de funció.
- Rebutja la trucada: Long press the Function button for 1 second.
- Assistent de veu: Single click to activate AI voice assistant (e.g., Siri, Google Assistant).
- Canvia les trucades de resposta manual/automàtica: Long press the Function button and ON/OFF button for 3 seconds.

Figure 3: AI Voice Assistant and FM Radio features.
4.5. Comunicació per intercomunicador
- The Moman CP-S supports intercom communication for up to 8 riders within a 2000m range, and 2 riders within a 1000m range.
- It is compatible with other intercom brands.

Figure 4: Group intercom communication range and capabilities.
4.6. Ràdio FM
- Activate the FM radio function to listen to broadcasts while riding.
Vídeo 2: Acabatview of Moman H2S Intercom features (similar to CP-S).
5. Especificacions
| Característica | Descripció |
|---|---|
| Número de model | CP-S |
| Tecnologia sense fils | Bluetooth 5.1 |
| Gamma d'intercomunicació | Up to 2000m (8 riders), 1000m (2 riders) |
| Capacitat de la bateria | 900 mAh |
| Temps de càrrega | 2 hores |
| Hora d'intercomunicació | Fins a 28 hores |
| Temps de reproducció de música | Fins a 33 hores |
| Temps d'espera | Fins a 300 hores |
| Resistència a l'aigua | IP65 (impermeable) |
| Reducció de soroll | DSP and 12th Gen CVC |
| Mida de l'altaveu | 40mm Hi-Fi |
| Mètode de control | Veu, botons |
| Indicacions de veu | 8 languages (Chinese, English, Japanese, German, French, Italian, Spanish, Korean) |
| Material | Plàstic |
| Característiques especials | Noise cancellation, Water resistant, Music sharing, FM Radio, AI Voice Assistant, Interchangeable shells |

Figura 5: Durada de la bateria i detalls de càrrega.

Figure 6: IP65 Water and Dust Resistance.
6. Manteniment
- Mantingueu el dispositiu net i sec. Netegeu-lo amb un drap suau i sec.amp tela.
- Eviteu exposar el dispositiu a temperatures extremes o a la llum solar directa durant períodes prolongats.
- Assegureu-vos que la tapa del port de càrrega estigui ben tancada quan no es carrega per mantenir la resistència a l'aigua.
- Carregueu el dispositiu regularment, fins i tot si no l'esteu fent servir, per mantenir la bateria en bon estat.
7. Solució De Problemes
7.1. Sense poder
- Ensure the battery is charged. Connect the device to a power source using the provided USB cable.
- Check if the power button is being held for the correct duration (3 seconds).
7.2. Cannot Pair with Phone
- Ensure the device is in pairing mode (red and blue indicator lights flashing).
- Desactiva i activa el Bluetooth del telèfon.
- Ensure the device is within range of your phone.
- Forget previous Bluetooth connections on your phone and try pairing again.
7.3. Poor Audio Quality/Noise
- Ensure speakers are correctly positioned near your ears and the microphone is close to your mouth.
- Check for any obstructions around the microphone.
- Verify that the volume is adjusted appropriately.
- The device features DSP and CVC noise reduction, which should minimize ambient noise. If issues persist, ensure the microphone is not picking up excessive wind noise.

Figure 7: Audio quality and noise reduction technology.
8. Garantia i Suport
The Moman CP-S Motorcycle Intercom System comes with a 2-year manufacturer's warranty. For technical support, warranty claims, or any other inquiries, please contact Moman customer service through their official channels.