Hooke Road GB8902-S

Hooke Road Side Steps Running Board Instruction Manual

Model: GB8902-S for Ford Bronco 4-Door (2021-2025)

Manufactured by Hooke Road

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Hooke Road Side Steps Running Boards, Model GB8902-S. These running boards are designed for Ford Bronco 4-Door models from 2021 to 2025 (excluding Bronco Sport). They offer a wide stepping surface for easy entry and exit, and function as heavy-duty rock sliders to protect your vehicle.

Hooke Road Side Steps Running Board installed on a white Ford Bronco

Image: Hooke Road Side Steps Running Board installed on a white Ford Bronco, showcasing the product's appearance and fit.

Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació siguin presents al vostre paquet:

  • Running Boards (Driver & Passenger Side)
  • Kit de maquinari de muntatge
  • Instrucció d'instal·lació

Especificacions

CaracterísticaDetall
MarcaHooke Road
MaterialAcer al carboni
ColorNegre
Pes de l'article70 lliures
Tipus de servei del vehicleVehicle utilitari esportiu
Acabat exteriorAmb textura
Tipus d'ajust d'automòbilAjust específic del vehicle
Dimensions del producte73 x 7.3 x 5.39 polzades
Número de modelGB8902-S
Diagram showing the dimensions of the Hooke Road Side Steps Running Board

Image: Detailed dimensions of the running board, showing length, width, and height measurements.

Configuració i instal·lació

The Hooke Road Side Steps are designed for a simple direct-mount installation, requiring no cutting or drilling. They utilize existing factory mounting points for a secure fit. It is recommended to have assistance during installation.

Passos generals d'instal·lació:

  1. Preparar el vehicle: Ensure the vehicle is on a level surface and properly secured.
  2. Identificar els punts de muntatge: Locate the factory mounting points along the vehicle's frame.
  3. Col·loca els suports: Secure the mounting brackets to the vehicle's frame using the provided hardware. Do not fully tighten at this stage to allow for adjustments.
  4. Posició dels estribos: Carefully lift and align the running boards with the attached brackets.
  5. Estribos segurs: Fasten the running boards to the brackets using the remaining hardware.
  6. Ajustar i estrènyer: Adjust the position of the running boards as needed, then fully tighten all hardware to ensure a secure installation.

Installation Visual Guides:

For a visual guide on the installation process, please refer to the following videos:

Video: Step-by-step Installation for the Bronco

This video provides a detailed, step-by-step guide for installing running boards on a Ford Bronco, demonstrating the process from start to finish.

Video: Bronco 4 Doors Running Boards Side Steps Installation

This video illustrates the installation of side steps for a 4-door Bronco, focusing on key attachment points and procedures.

Video: How to Install 2021-2024 Ford Bronco 4-Door Running Boards

A comprehensive installation video specifically for 2021-2024 Ford Bronco 4-Door running boards, detailing the mounting process.

Video: Install instructions for IAG Full Length EZ-Steps

This video provides general installation instructions for full-length steps on a Bronco, which can be used as a reference for similar products.

Instruccions de funcionament

The Hooke Road Side Steps Running Boards serve a dual purpose:

  • Easy Entry/Exit: The wide stepping surface (5.2 inches) provides a stable platform for convenient access to and from your vehicle.
  • Rock Slider Functionality: Constructed from durable steel tubing and plates, these running boards also act as heavy-duty rock sliders. They are engineered to shield your vehicle's body and paint from trail debris, rocks, and side impacts during off-road adventures.
lateral view of a white Ford Bronco with Hooke Road Side Steps Running Board installed

Imatge: Lateral view of the running board installed on a white Ford Bronco, demonstrating its function as a step.

Manteniment

To ensure the longevity and appearance of your Hooke Road Side Steps Running Boards, follow these maintenance guidelines:

  • Neteja regular: Clean the running boards regularly with mild soap and water to remove dirt, mud, and road grime.
  • Inspeccionar per danys: Periodically inspect the textured black powder-coat exterior for any scratches or signs of wear. The premium interior E-coating helps prevent rust, but external damage should be addressed promptly.
  • Comprovació dels elements de fixació: Regularly check all mounting hardware to ensure it remains tight and secure. Re-tighten if necessary.

Resolució de problemes

If you encounter any issues with your Hooke Road Side Steps Running Boards, consider the following:

  • Ajust ample: If the running boards feel loose, re-check and tighten all mounting bolts and nuts.
  • Sorolls inusuals: Inspect for any loose components or contact points between the running boards and the vehicle frame. Ensure all parts are correctly installed and tightened.
  • Maquinari que falta: In case of missing hardware, contact Hooke Road customer support for assistance.

For further assistance, please contact Hooke Road customer support.

Garantia i Suport

Your Hooke Road Side Steps Running Boards come with a 2 any de garantia del fabricant covering transit damage or verified defects. Additionally, Hooke Road provides atenció al client de per vida for any inquiries or assistance you may need.

For warranty claims or customer support, please refer to the contact information provided with your purchase or visit the official Hooke Road weblloc.

Documents relacionats - GB8902-S

Preview Hooke Road BXG.8911-S Front Bumper Installation Guide for Ford Bronco
Detailed installation instructions for the Hooke Road BXG.8911-S full-width front bumper designed for Ford Bronco 2021-2024 models. Includes parts list, tools required, and step-by-step assembly.
Preview Hooke Road BXG.5017 Rocker Guards Installation Instructions
Detailed installation guide for Hooke Road BXG.5017 Rocker Guards, including parts list, tools required, and step-by-step assembly instructions for off-road vehicles.
Preview Hooke Road BXG.8929-S Roof Rack Installation Guide
Step-by-step installation instructions for the Hooke Road BXG.8929-S Roof Rack, including parts list, tools required, and assembly details for Ford Bronco 2-Door Hardtop vehicles.
Preview Hooke Road BXG.8910-S Rear Bumper Installation Guide for Ford Bronco
Detailed installation instructions for the Hooke Road BXG.8910-S Rear Bumper, designed for the Ford Bronco. This guide includes a comprehensive parts list, required tools, estimated installation time, and step-by-step visual descriptions for a successful fitment.
Preview Hooke Road Adaptive Cruise Control Relocation Bracket Installation Guide
Step-by-step installation instructions for the Hooke Road Adaptive Cruise Control (ACC) Relocation Bracket for the Ford Bronco. This guide details the removal of factory components and the installation of the new bracket to relocate the ACC module.
Preview Instruccions d'instal·lació dels esglaons laterals Hooke Road BXG.9465
Detailed installation guide for Hooke Road BXG.9465 side steps, including parts list, tools required, and step-by-step assembly instructions for compatible vehicles.