PETULTRA Automatic Cat Feeder Stand Instruction Manual

1. Introducció

This manual provides instructions for the proper setup, operation, and maintenance of your PETULTRA Automatic Cat Feeder Stand. This stand is designed to elevate your pet's feeder, promoting better posture and digestion. Please read this manual thoroughly before use and retain it for future reference.

Image: The PETULTRA Automatic Cat Feeder Stand in use, showing a cat comfortably eating from an elevated position. This stand helps protect your pet's neck by providing an ergonomic feeding height.

2. Informació de seguretat

• Assegureu-vos que el suport estigui col·locat sobre una superfície estable i anivellada per evitar que bolqui.
• Mantenir fora de l'abast dels nens.
• This product is intended for pet feeder support only. Do not use for other purposes.
• Regularly inspect the stand for any damage or loose parts.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents al paquet:

• 1 x Elevated Pet Feeder Stand
• 1 x Baffle
• 4 x Short Foot Pads (0.98 inches)
• 4 x High Foot Pads (1.96 inches)
• Note: Automatic feeder is not included.

Image: A detailed diagram showing the individual components of the PETULTRA Automatic Cat Feeder Stand, including the main stand, drawer, baffle, and two sizes of foot pads, along with their dimensions.

4. Instruccions de configuració

1. Fixeu les coixinetes dels peus: Select either the short or high foot pads based on your desired height. Insert the four chosen foot pads firmly into the designated slots on the underside of the stand.
2. Insert Baffle: Place the baffle into the rear slot of the stand. This adjustable block helps secure various feeder sizes.
3. Alimentador de posició: Carefully place your automatic pet feeder onto the stand, ensuring it fits securely against the baffle.
4. Calaix d'inserció: Slide the storage drawer into its designated slot at the front of the stand.

Image: An exploded diagram illustrating the assembly process of the PETULTRA Automatic Cat Feeder Stand, showing how the drawer, baffle, and foot pads connect to the main stand.

5. Instruccions de funcionament

The PETULTRA Automatic Cat Feeder Stand functions as a stable, elevated platform for your existing automatic pet feeder. Once assembled and your feeder is placed, the stand requires no further operation.

Ús del calaix d'emmagatzematge

The integrated drawer provides convenient storage for pet snacks, small cans of food, or other small pet accessories. Simply pull the drawer out to access its contents and push it back in to close.

Image: The PETULTRA Automatic Cat Feeder Stand with its integrated drawer pulled open, revealing small cans of pet food and snack pouches stored inside. This highlights the convenient storage feature.

6. Ajust d'alçada

The stand offers three adjustable height options to accommodate various pet sizes and ages. The height is adjusted by changing the foot pads.

• Low Height: Use the short foot pads (0.98 inches) for a total stand height of approximately 3.8 inches.
• Medium Height: Combine the short and high foot pads (stacked) for a total stand height of approximately 4.78 inches.
• High Height: Use the high foot pads (1.96 inches) for a total stand height of approximately 5.76 inches.

To change the height, carefully remove the existing foot pads and insert the desired set firmly into the base.

Image: A visual comparison of the PETULTRA Automatic Cat Feeder Stand at three different adjustable heights, demonstrating its suitability for cats and small dogs of various sizes.

7. Manteniment

• Neteja: The stand is made from Acrylonitrile Butadiene Styrene (ABS) material. Wipe the stand clean with a damp drap i detergent suau. Eviteu els netejadors abrasius.
• Assecat: Ensure the stand is completely dry before placing the feeder back on it.
• Inspecció: Periodically check the foot pads and baffle for wear or damage. Replace if necessary.

8. Solució De Problemes

• Feeder is unstable:
  • Ensure all four foot pads are securely inserted and the stand is on a flat surface.
  • Verify that the baffle is correctly positioned to support your feeder.
  • Check that the rubber anti-skid pads on the feet are intact.
• Drawer is stiff or not sliding smoothly:
  • Check for any debris or obstructions in the drawer tracks.
  • Ensure the drawer is inserted correctly and not misaligned.

9. Especificacions

10. Informació de la garantia

This PETULTRA product comes with a 1 any de garantia from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, or unauthorized modifications.

11. Atenció al client

If you have any questions, concerns, or require assistance with your PETULTRA Automatic Cat Feeder Stand, please contact our customer support team.

• Correu electrònic: support@petultra.com
• Weblloc: Visit the PETULTRA Store on Amazon