Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight. This energy-efficient LED downlight offers versatile lighting solutions with its rotatable design and selectable color temperature feature. Please read these instructions thoroughly before installation and retain them for future reference.
Característiques principals:
- 5 CCT Selectable: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using the switch on the junction box.
- Rotatable Gimbal: Features 360° rotation and 90° tilt for precise light direction.
- Regulable: Compatible with most standard LED dimmers, offering a dimmable range of 10-100%.
- Canless Design: No separate housing required; installs directly into the ceiling with spring clips.
- CRI alt: 90 CRI for accurate color rendering.
- Classificació IC: Apte per al contacte directe amb l'aïllament.
- Damp Valoració: Ideal for various indoor environments including bathrooms and kitchens.
Informació de seguretat
ADVERTÈNCIA: Risc d'incendi o descàrrega elèctrica.
- La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics nacionals i locals.
- Desconnecteu l'alimentació a l'interruptor automàtic abans de la instal·lació o el manteniment.
- Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
- No modifiqueu ni altereu el dispositiu.
- This fixture is designed for 120VAC circuits only.
- Do not use with dimmers not specifically designed for LED lighting.
Contingut del paquet
- 1x Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight (Model MRL-S20555B)
- 1x Remote Junction Box with CCT Select Switch
- Foam Gasket (pre-installed for air-tight application)
Image: The Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight, showing the main light fixture with spring clips and the connected remote junction box.
Especificacions
| Número de model | MRL-S20555B |
| Consum d'energia | 5 watts (equivalent a 40 W incandescent) |
| Flux lluminós | 360 lúmens |
| Entrada Voltage | 120 VCA |
| Temperatura de color (CCT) | Seleccionable: 2700K, 3000K, 3500K, 4000K, 5000K |
| Índex de reproducció del color (CRI) | 90 |
| Regulabilitat | 10% - 100% (with compatible LED dimmers) |
| Angle del feix | 38° |
| Angle de rotació | 360° |
| Angle d'inclinació | 90° |
| Dimensions de l'aparell | 1.3” Deep x 3.55” Diameter (0.7” trim width) |
| Dimensions de la caixa de connexions | 4.7” W x 1.8” L X 2” H |
| Wire Length (Fixture to J-Box) | 16.9" |
| Material | Cast Aluminum body, Polycarbonate lens |
| Certificacions | ETL Listed, IC Rated, Damp Valorat |
Configuració i instal·lació
- Prepareu l'àrea d'instal·lació:
Turn off power at the circuit breaker before beginning installation. Ensure the ceiling area is clear of obstructions and suitable for recessed lighting.
- Cut the Ceiling Opening:
Using a hole saw, cut a 2-inch diameter hole in the ceiling drywall at the desired location. Ensure the hole is clean and smooth.
Imatge: Vista de dalt a baix view of the recessed light, highlighting the spring clips used for installation.
- Connect Wiring to Junction Box:
Open the remote junction box. Connect the household electrical wires (live, neutral, ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure.
Image: The back of the recessed light, showing the wire connecting to the junction box and the spring clips.
- Selecciona la temperatura de color (CCT):
Before closing the junction box and installing it into the ceiling, use the CCT selector switch located on the side of the junction box to choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
Image: A close-up of the remote junction box, clearly showing the 5-position CCT selector switch for choosing light color.
- Place Junction Box:
Once wiring is complete and CCT is selected, close the junction box and place it inside the ceiling cavity, ensuring it rests securely on a ceiling beam or is otherwise supported.
- Install the Downlight:
Push the spring clips on the downlight upwards and insert the fixture into the ceiling opening. Release the clips to secure the downlight flush against the ceiling. The foam gasket will ensure an air-tight seal.
Image: An installed Maxxima recessed light in a ceiling, demonstrating the adjustable gimbal feature.
- Restaura l'alimentació:
Un cop finalitzada la instal·lació, restableix l'alimentació a l'interruptor i prova el llum.
Instruccions de funcionament
- Encès/apagat: Control the light using a standard wall switch or dimmer switch connected to the circuit.
- Ajusta la temperatura de color (CCT): The CCT is set during installation via the switch on the junction box. To change the CCT, power must be turned off at the breaker, the fixture removed, and the switch on the junction box adjusted.
- Dimecres: If connected to a compatible LED dimmer, adjust the dimmer switch to achieve the desired brightness level (10-100%).
- Ajust de la direcció de la llum: The gimbal mechanism allows for 360° rotation and 90° tilt. Gently push or pull the inner light module to rotate it or tilt it to direct the light as needed.
Image: A Maxxima recessed light demonstrating its full range of rotation and tilt, allowing for flexible light direction.
Manteniment
- Neteja: Assegureu-vos que l'alimentació estigui apagada abans de netejar-la. Netegeu l'aparell amb un drap suau, sec o lleugerament humit.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Sense peces reparables per l'usuari: The LED light source is integrated and not replaceable. Do not attempt to open or repair the fixture.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | Sense corrent, cablejat solt, interruptor defectuós. | Comproveu l'interruptor. Verifiqueu que totes les connexions dels cables estiguin ben fixades. Proveu l'interruptor. |
| La llum parpelleja o s'atenua de manera incorrecta. | Regulador d'intensitat incompatible, cablejat fluix. | Ensure dimmer is compatible with LED fixtures. Check wiring connections. |
| Temperatura de color incorrecta. | L'interruptor CCT està mal configurat. | Turn off power, remove fixture, and adjust the CCT switch on the junction box. |
Garantia i suport
This Maxxima product is backed by a 3 any de garantia des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.
For technical support, warranty claims, or further assistance, please visit the official Maxxima weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Podeu trobar més informació i productes a Botiga Maxxima a Amazon.
