1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your APC Smart-UPS SMT750RM2UC. This Uninterruptible Power Supply (UPS) is designed to provide reliable power and surge protection for critical electronic equipment.
2. Informació de seguretat
Read these instructions carefully before attempting to install, operate, service, or maintain this equipment. Adhere to all warnings and operating instructions.
- This UPS contains internal batteries and may present a shock hazard even when disconnected from the AC power source.
- El manteniment de les bateries ha de ser realitzat o supervisat per personal que conegui les bateries i les precaucions necessàries.
- Do not dispose of batteries in a fire. Batteries may explode.
- No obriu ni mutileu les bateries. L'electròlit alliberat és nociu per a la pell i els ulls. Pot ser tòxic.
- Una bateria pot presentar un risc de descàrrega elèctrica i un alt corrent de curtcircuit.
- Connecteu sempre el SAI a una presa de terra.
- No utilitzeu el SAI per a equips mèdics o de suport vital.
3. Contingut del paquet
Verify that all components are present upon receipt. Contact your dealer if any items are missing or damaged.
- APC Smart-UPS SMT750RM2UC Unit
- 16GB USB 3.0 Drive
- Rackmount installation hardware
- CD de documentació
- Cable de comunicació USB
- Cable de comunicació sèrie
- Cable(s) d'alimentació
4. Característiques del producte
The APC Smart-UPS SMT750RM2UC offers advanced features for power protection and management:
- Efficient Power Protection: Provides 750VA/500W of line-interactive pure sine wave power in a 2U rackmount design, suitable for servers, storage systems, network closets, and POS systems.
- Voltage Stability Assurance: Volum automàtictage Regulation (AVR) corrects utility voltage fluctuations, ensuring a stable power supply to connected devices.
- Capacitats de supervisió remota: Features a SmartConnect Ethernet Port for cloud-based remote power monitoring, firmware upgrades, diagnostics, and email notifications.
- Flexible Shutdown Options: Supports graceful shutdown via serial or USB cables using PowerChute Serial Shutdown software, or through an optional Network Management Card for seamless shutdown of physical and virtual servers.
- Included 16GB USB Drive: A 16GB USB drive is included for data storage or file transferència.
5. Configuració
5.1 Instal·lació física
The SMT750RM2UC is a 2U rackmount unit. Ensure proper ventilation and secure mounting within a standard 19-inch rack.
Pas 1: Install the rackmount rails (if not pre-installed) into your server rack according to the rail manufacturer's instructions.
Pas 2: Carefully slide the UPS unit onto the installed rails until it clicks into place. Secure the front of the UPS to the rack using the provided screws.
Pas 3: Ensure adequate clearance for airflow around the front and rear of the unit.
5.2 Connexions
Connect your equipment to the UPS as follows:
- Potència d'entrada: Connect the UPS input power cord (NEMA 5-15P) to a grounded utility power outlet.
- Connexions de sortida: Connect your critical equipment (servers, network devices, etc.) to the 6 x NEMA 5-15R output receptacles on the rear of the UPS.
- Ports de comunicació:
- Port USB: Connect the provided USB cable from the UPS to your computer for local monitoring and graceful shutdown via PowerChute software.
- Port sèrie: Connect the provided serial cable for local monitoring and graceful shutdown via PowerChute software.
- SmartConnect Ethernet Port: Connect an Ethernet cable to this port for cloud-based remote monitoring and management.
- SmartSlot: An optional slot for installing accessories like a Network Management Card for advanced network-based management.
5.3 Encès inicial
Després de fer totes les connexions:
- Press the power button on the front panel of the UPS.
- The LCD display will illuminate, and the UPS will perform a self-test.
- Allow the UPS to charge its batteries for at least 24 hours before relying on it for extended backup power.
6. Funcionament
6.1 LCD Display and Control
The front panel LCD provides real-time status information and allows for configuration of UPS settings. Use the navigation buttons (Esc, Up, Down, Enter) to browse menus and adjust parameters.
- Indicadors d'estat: Display battery charge, load level, and operational mode.
- Configuració: Ajustar el volum de sortidatage, sensitivity, alarm settings, and more.
- Autocomprovació: Initiate a battery self-test to check battery health.
6.2 Volum automàtictagReglament (AVR)
El SAI corregeix automàticament els volums menorstage fluctuations (sags and surges) without switching to battery power, preserving battery life and ensuring a stable power supply to connected equipment.
6.3 SmartConnect Port
The SmartConnect port enables cloud-based monitoring of your UPS. Once connected to your network and registered, you can access UPS status, receive alerts, and perform basic management tasks from a web navegador o aplicació mòbil.
6.4 Graceful Shutdown
En el cas d'una potència ampliadatage, the UPS can initiate a graceful shutdown of connected servers and virtual machines using PowerChute software (via USB or Serial) or an optional Network Management Card (via SmartSlot). This prevents data loss and ensures system integrity.
7. Manteniment
7.1 Cura i substitució de la bateria
The UPS contains a sealed, maintenance-free lead-acid battery. Batteries typically last 3-5 years under normal operating conditions. Replace batteries when the UPS indicates a battery fault or when runtime significantly decreases.
- Refer to the full user manual for detailed battery replacement instructions.
- Always use genuine APC replacement battery cartridges (RBCs) to ensure compatibility and optimal performance.
- Recycle old batteries responsibly.
7.2 Neteja
Periodically clean the exterior of the UPS with a soft, damp cloth. Ensure ventilation openings are free from dust and debris to maintain proper airflow.
8. Solució De Problemes
This section provides solutions to common issues. For more complex problems, consult the full user manual or APC technical support.
| Problema | Causa possible | Solució |
|---|---|---|
| El SAI no s'encén | Not connected to utility power; Battery not connected; Low battery charge. | Ensure power cord is securely plugged in; Check internal battery connections; Allow UPS to charge for several hours. |
| El SAI emet un so continu | Amb bateria; Condició de sobrecàrrega; Bateria baixa. | Check utility power; Reduce connected load; Allow battery to charge or replace if faulty. |
| "Replace Battery" indicator is on | Battery has reached end of life or is faulty. | Perform a battery self-test; Replace the battery cartridge if necessary. |
9. Especificacions
Key technical specifications for the APC Smart-UPS SMT750RM2UC:
- Model: SMT750RM2UC
- Factor de forma: Muntatge en rack 2U
- Capacitat de potència de sortida: 750 VA / 500 watts
- Connexions de sortida: 6 x NEMA 5-15R
- Connexió d'entrada: NEMA 5-15P
- Volum d’entrada nominaltage: 120 V
- Volum de sortida nominaltage: 120 V
- Topologia: Línia interactiva
- Tipus de forma d'ona: Ona sinusoïdal
- Dimensions (A x A x P): 3.39 polzades (8.6 cm) x 17.01 polzades (43.2 cm) x 16.10 polzades (40.9 cm)
- Pes net: 39.02 lliures (17.7 kg)
- Accessoris inclosos: 16GB USB 3.0 Drive
10. Garantia i Suport
APC ofereix una garantia estàndard per a aquest producte. Per conèixer els termes i condicions específics de la garantia, consulteu la targeta de garantia inclosa amb el producte o visiteu el lloc web oficial d'APC. weblloc.
For technical support, product registration, or to download the latest software and documentation, please visit the APC support portal or contact APC customer service.
Recursos en línia: Suport d'APC Weblloc
