Manual d'usuari del kit de pods VOOPOO VMATE i2 30W

1. Introducció

The VOOPOO VMATE i2 Pod Kit is a compact and user-friendly electronic cigarette device designed for a pure and consistent vaping experience. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and troubleshooting. This product is designed for use with nicotine-free e-liquids and does not contain nicotine or tobacco.

Contingut del paquet

• 1 x VMATE i2 Device
• 1 x VMATE Top Fill Cartridge 0.7 Ω (3 ml)
• 1 x cable de càrrega tipus C
• 1 x Manual d'usuari

Image 1.1: Contents of the VOOPOO VMATE i2 standard package, including the device, pod cartridge, Type-C cable, and user manual.

2. Informació de seguretat

• This product is intended for adult users only. Keep out of reach of children and pets.
• This product does not contain nicotine or tobacco. It is designed for use with nicotine-free e-liquids.
• Do not disassemble, crush, puncture, or short-circuit the device.
• Avoid exposure to extreme temperatures, direct sunlight, or water.
• Feu servir només el cable de càrrega proporcionat o un cable de tipus C certificat.
• No utilitzeu el dispositiu si està danyat o mostra signes de mal funcionament.
• Dispose of the device and cartridges responsibly according to local regulations.

3. Introducció (Configuració)

3.1 Càrrega del dispositiu

Connect the Type-C charging cable to the device's charging port and a suitable power source (e.g., a USB wall adapter or computer USB port). The RGB indicator light will show the charging status. Ensure the device is fully charged before first use for optimal battery performance.

Image 3.1: The VOOPOO VMATE i2 device highlighting its 1500mAh battery capacity and RGB light bar for battery indication.

3.2 Filling the Pod Cartridge

1. Remove the pod cartridge from the device.
2. Locate and open the silicone plug on the top of the cartridge.
3. Carefully fill the cartridge with your preferred e-liquid through the filling port, avoiding overfilling.
4. Close the silicone plug securely to prevent leakage.
5. For first-time use or with a new cartridge, allow the e-liquid to soak into the coil for 5-10 minutes before vaping. This priming step prevents dry hits and ensures proper coil saturation.

Image 3.2: Illustration of the easy top-filling mechanism of the VMATE i2 pod cartridge, showing e-liquid being added without removing the cartridge from the device.

3.3 Installing the Pod Cartridge

After filling, insert the pod cartridge firmly into the device until it clicks into place. Ensure a secure connection for proper operation.

4. Instruccions de funcionament

4.1 Vaping

The VMATE i2 features an auto-draw activation. Simply inhale through the mouthpiece to activate the device and produce vapor. There are no buttons to press for activation.

4.2 Ajust del flux d'aire

Locate the airflow slider on the side of the device. Adjust the slider to customize your vaping experience, from a tighter Mouth-to-Lung (MTL) draw to a looser Restricted Direct-to-Lung (RDL) draw.

4.3 Indicador de nivell de bateria

The RGB light bar on the side of the device indicates the current battery level:

• Verd: Nivell de bateria alt
• Blau: Nivell de bateria mitjà
• Vermell: Low battery level (Recharge immediately)

Image 4.1: The VOOPOO VMATE i2 device in Matte Black, showing the RGB indicator light bar on the side.

5. Manteniment

5.1 Neteja

Regularly clean the device and pod cartridge to ensure optimal performance and hygiene. Use a dry, soft cloth to wipe the device body. Clean the pod connection points and mouthpiece to prevent e-liquid residue buildup.

5.2 Pod Cartridge Replacement

Replace the pod cartridge when you notice a burnt taste, reduced vapor production, or diminished flavor. To replace, simply pull out the old cartridge from the device and insert a new one after filling it with e-liquid and allowing it to prime (as described in Section 3.2).

Image 5.1: Features of the VMATE i2 pod cartridge, highlighting its 3ml capacity, 90ml longevity, and 30-day leakproof design.

6. Solució De Problemes

• No Vapor/Weak Vapor:
  • Comproveu el nivell de la bateria i carregueu-la si cal.
  • Ensure the pod cartridge is correctly installed.
  • Check e-liquid level; refill if low.
  • Replace the pod cartridge if the coil is burnt or old.
• Fuga:
  • Ensure the silicone plug on the pod is securely closed after filling.
  • Avoid overfilling the cartridge.
  • Ensure the pod is correctly seated in the device.
  • Replace the pod cartridge if the issue persists, as the seal might be compromised.
• Liquid in Mouth:
  • Avoid aggressive inhaling.
  • Ensure the e-liquid level is not too high.
  • Clean any condensation from the mouthpiece.
  • Replace the pod cartridge if the issue persists.
• Problemes de càrrega:
  • Ensure the Type-C cable is properly connected to both the device and the power source.
  • Prova un cable o adaptador de corrent tipus C diferent.
  • Clean the charging port for any debris.

7. Especificacions

Image 7.1: Detailed specifications and dimensions of the VOOPOO VMATE i2 device and its cartridge.

8. Garantia i Suport

For detailed warranty information, product registration, and customer support, please refer to the official VOOPOO website or contact your local authorized retailer. Please retain your proof of purchase for any warranty claims.