1. Introducció i finalview
The GEYA Overvoltagi Undervoltage Protective Device is designed to provide comprehensive protection for household equipment against voltage fluctuations. It monitors voltage and current in real-time, ensuring the safety and longevity of connected appliances.
Característiques principals:
- Voltage (True RMS) monitoring and protection. Over/under voltage values can be precisely set.
- Double bus wiring design for enhanced durability and stronger current handling ability.
- Automatic self-reset function after a fault condition is cleared.
- Digital display shows real-time voltage values, and fault statuses are indicated by LED lights.
- Compact 1-MODULE design, suitable for DIN rail mounting.
Aquesta imatge mostra la part frontal view of the GEYA GPS8-01 device, highlighting its digital display, control buttons, and terminal connections for neutral (N) and input (IN).
2. Configuració i instal·lació
Proper installation is crucial for the safe and effective operation of the device. This device is designed for DIN rail mounting. Ensure all power is disconnected before proceeding with installation.
Diagrama de cablejat:
This diagram illustrates the difference between upper wiring and down wiring configurations. For the GPS8-01 (Down Wiring) model, the incoming line connects to the bottom terminals (N and 1), and the outgoing load connects to the top terminals (N and 2).
Passos d'instal·lació:
- Mount the device securely onto a standard DIN rail.
- Connect the neutral (N) and live (L) wires from the power supply to the designated input terminals (N and IN) on the device. For the GPS8-01 (Down Wiring) model, these are the bottom terminals.
- Connect the load wires (neutral and live) from your household equipment to the output terminals on the device. For the GPS8-01 (Down Wiring) model, these are the top terminals.
- Assegureu-vos que totes les connexions estiguin ben ajustades i segures per evitar contactes solts i possibles perills.
- Once wiring is complete, restore power to the circuit. The device will power on and display the current voltage.
Installation Demonstration Video:
This video provides a visual guide to the installation and basic operation of the GEYA Overvoltage & Undervoltage Protector (GPS8-01/02/03). It demonstrates how to connect the device to a power supply and a load, and shows the device's display in action. The video also highlights key features such as RMS measurement, settable voltage/current values, self-reset, and LED fault indicators.
3. Instruccions de funcionament
Tauler acabatview:
The GPS8-01 panel features a digital display for operating voltage, an under-voltage indicator, an over-voltage indicator, and a power open/close indicator. It includes 'M' (Menu/Mode), 'Up', and 'Power' buttons for control.
Configuració de paràmetres:
To enter the parameter setting interface, press the 'M' button for 3 seconds. Use the 'Up' and 'Down' (implied by context, though only 'Up' is shown as a button) buttons to adjust values. Short press 'M' to cycle through settings: Overvoltage setting (230V-300V, factory default 275V), Undervoltage setting (145V-210V, factory default 175V), and Reset time setting (2s-900s, factory default 30s). Long press 'M' for 3 seconds to exit the setup mode and return to running mode. If no key is operated for 60 seconds, the device will automatically exit the setting interface.
4. Manteniment
The GEYA Overvoltagi Undervoltage Protective Device is designed for minimal maintenance. However, regular checks can ensure its continued optimal performance.
- Neteja: Periodically wipe the device with a dry, soft cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Comprovació de la connexió: Annually, or if you suspect an issue, verify that all wiring connections are secure and free from corrosion. Ensure power is off before checking connections.
- Condicions ambientals: Assegureu-vos que el dispositiu funcioni dins dels rangs de temperatura i humitat especificats per evitar danys.
- Firmware: This device does not typically require user-updatable firmware.
5. Solució De Problemes
If you encounter issues with your GEYA Overvoltagi Undervoltage Protective Device, refer to the following common troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| Device not powering on/display is blank. | No power supply; loose wiring; internal fault. | Check power source. Ensure wiring is correct and secure. If problem persists, contact support. |
| El dispositiu s'encén amb freqüència. | Voltage outside set parameters; faulty appliance; incorrect settings. | Verify actual voltage with a multimeter. Check connected appliances for faults. Review and adjust over/under voltage configuració. |
| Display shows error code or abnormal reading. | Internal malfunction; extreme voltage condició. | Note the error code. Disconnect and reconnect power. If error persists, contact support. |
| Device does not self-reset. | Fault condition still present; reset time setting too long; internal fault. | Assegureu-vos que el voltage has returned to normal range. Check the reset time setting. If necessary, manually reset by cycling power. |
For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact GEYA customer support.
6. Especificacions
Detailed technical specifications for the GEYA GPS8-01 Overvoltagi Undervoltage Protective Device:
| Paràmetre | Value (GPS8-01) |
|---|---|
| Funció | Més i sota voltage protecció |
| Vol. d'oferta nominaltage | AC220V (L-N) |
| Rated Supply Frequency | 50/60Hz |
| Corrent de funcionament nominal | 32A, 40A, 50A, 63A, 80A (AC1) - *Note: This specific model is 40A.* |
| Càrrega | CA màx. 3VA |
| Voltage Visualització | Sí |
| Pantalla actual | No |
| Més del voltage Operation Value | 230V ~ 300V (factory default: 275V) |
| Més del voltage Action Delay | 0.5 s |
| Sota el voltage Operation Value | 145V ~ 210V (factory default: 175V) |
| Sota el voltage Action Delay | 0.5 s |
| Retard d'encesa | 2s |
| Restablir l'hora | 2 ~ 900s (factory default: 30s) |
| Error de mesura | ≤1% |
| Temperatura de funcionament | -20 °C a +55 °C (-4 °F a 131 °F) |
| Temperatura d'emmagatzematge | -35 °C a +75 °C (-22 °F a 158 °F) |
| Mounting/DIN Rail | DIN rail EN/IEC 60715 |
| Grau de Protecció | IP40 per panell frontal/terminals IP20 |
| Posició operativa | Qualsevol |
| Overvoltage Categoria | III. |
| Grau de contaminació | 2 |
| Dimensions | 82 × 36 × 68 mm |
| Pes | 130 g |
This image provides a visual representation of the technical specifications, including functions, rated supply voltage, frequency, operational current, and environmental conditions.
Dimensions:
This image illustrates the physical dimensions of the device, showing its height (3.22in), width (1.41in), and depth (2.65in).
7. Garantia i Suport
GEYA products are manufactured to high quality standards. For warranty information and technical support, please refer to the official GEYA weblloc web o poseu-vos en contacte amb el vostre distribuïdor local.
- Garantia: Please retain your proof of purchase for warranty claims. Specific warranty terms and conditions may vary by region.
- Suport tècnic: For technical assistance, installation queries, or troubleshooting beyond this manual, please reach out to GEYA customer service.
