Introducció
The DYNASTY PROAUDIO TMP-1 is a professional vacuum tube microphone preamplifier designed to enhance audio signals with warmth and clarity. It features a 12AX7 vacuum tube, 48V phantom power, and a built-in limiter, making it suitable for a variety of recording and live sound applications with both condenser and dynamic microphones, as well as instruments.
Instruccions de seguretat
- Llegiu atentament totes les instruccions abans de fer servir.
- No exposeu la unitat a la pluja o la humitat.
- No obriu la c.asing. Demaneu totes les tasques de manteniment a personal qualificat.
- Assegureu-vos una ventilació adequada per evitar el sobreescalfament.
- Use only the specified power adapter (AC 9V).
- Disconnect power before cleaning or when not in use for extended periods.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- TMP-1 Professional Vacuum Tube Microphone Preampmés viu
- Adaptador de corrent (CA 9V)
- Manual d'usuari (aquest document)
Producte acabatview
The TMP-1 features a robust design with intuitive controls for optimal audio processing.
This image shows an angled view of the DYNASTY PROAUDIO TMP-1 Professional Vacuum Tube Microphone Preamplifier. The front panel with controls and indicators is visible, along with the sturdy black casing.
Aquesta imatge ofereix un primer pla view of the TMP-1's front panel. It clearly displays the "OUTPUT LEVEL" LED indicators, "Gain Input" and "Drive" rotary knobs, and push-buttons for "Phantom Power", "Limit", "Phase", and "Gain".
This image shows the rear panel of the TMP-1, highlighting the input and output connections. It includes XLR and 1/4-inch (6.35mm) input jacks, XLR and 1/4-inch (6.35mm) output jacks, and the AC 9V power input.
Controls i indicadors del panell frontal
- OUTPUT LEVEL LEDs: Indicators for signal level (-10, -5, 0, +3, +6dB Peak).
- Gain Input Knob: Adjusts the input gain from minimum to maximum.
- Maneta de la unitat: Controls the amount of tube saturation/drive.
- Phantom Power Button (ON/OFF): Activates/deactivates 48V phantom power for condenser microphones.
- Limit Button (ON/OFF): Engages/disengages the built-in limiter to prevent clipping.
- Phase Button (Reverse/Normal): Reverses the phase of the input signal.
- Gain Button (+20dB/Normal): Provides an additional +20dB gain boost.
Connexions del panell posterior
- INPUT (XLR & 1/4-inch): Balanced XLR and unbalanced 1/4-inch (6.35mm) inputs for microphones or instruments.
- OUTPUT (XLR & 1/4-inch): Balanced XLR and unbalanced 1/4-inch (6.35mm) outputs for connecting to mixers, audio interfaces, or other audio devices.
- AC 9V: Power input for the included AC adapter.
Configuració
- Connexió d'alimentació: Connect the supplied AC 9V power adapter to the "AC 9V" input on the rear panel of the TMP-1, then plug the adapter into a suitable power outlet.
- Connexió d'entrada:
- For microphones: Connect your microphone to either the XLR or 1/4-inch INPUT jack on the rear panel.
- For instruments: Connect your instrument (e.g., guitar, bass) to the 1/4-inch INPUT jack.
- Connexió de sortida: Connect the TMP-1's XLR or 1/4-inch OUTPUT to your mixer, audio interface, or recording device's input.
- Configuració inicial: Before powering on, ensure the "Gain Input" and "Drive" knobs are set to their minimum positions. Ensure "Phantom Power" is OFF unless using a condenser microphone.
This image shows the TMP-1 preamplifier with various audio cables connected to its input and output jacks, demonstrating a typical setup.
Instruccions de funcionament
Encès
Once all connections are made, power on the TMP-1. The "Power" LED on the front panel will illuminate.
Utilitzant l'alimentació fantasma
If you are using a condenser microphone, press the Poder fantasma button to activate 48V phantom power. The corresponding LED will light up. Warning: Do not activate phantom power when using dynamic microphones or ribbon microphones, as this can cause damage.
Ajust de guany d'entrada
Slowly turn the Gain Input knob clockwise to increase the input signal level. Monitor the "OUTPUT LEVEL" LEDs. Aim for the signal to primarily light up the -5 and 0 dB LEDs during normal operation, with occasional peaks into the +3 dB LED. Avoid consistently hitting the +6dB Peak LED, which indicates clipping.
Applying Drive (Tube Saturation)
El Condueix knob controls the amount of tube saturation. Turn it clockwise to add warmth and harmonic richness to your signal. Experiment with this control to find the desired sonic character.
Using the Limiter
Premeu el botó Límit button to engage the built-in limiter. This helps prevent signal peaks from exceeding a certain level, protecting your recording equipment from clipping and providing a more consistent output level.
Inversió de fases
El Fase button allows you to reverse the phase of the input signal. This can be useful in multi-microphone setups to correct phase cancellation issues or for creative effects.
Additional Gain Boost
If your input signal is very low, you can press the Guanyar button to apply an additional +20dB gain boost. Use this judiciously to avoid introducing unwanted noise or distortion.
This image shows a close-up of a glowing vacuum tube, representing the 12AX7 tube inside the TMP-1 that provides its characteristic warmth.
This image features a professional condenser microphone in a studio environment, illustrating the type of microphone that benefits from the TMP-1's phantom power and preamplificació.
This image shows hands playing a bass guitar, demonstrating the TMP-1's versatility in handling instrument-level signals.
Manteniment
- Neteja: Feu servir un drap suau i sec per netejar l'exterior de la unitat. No utilitzeu netejadors líquids ni dissolvents.
- Emmagatzematge: Guardeu la unitat en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Substitució del tub: The 12AX7 vacuum tube has a finite lifespan. If you notice a degradation in sound quality or increased noise over time, the tube may need replacement. This should be performed by qualified service personnel.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense poder | Power adapter not connected; faulty outlet; faulty adapter. | Check power connections; try a different outlet; test adapter if possible. |
| Sense sortida de so | Incorrect cable connections; gain too low; phantom power not engaged for condenser mic; faulty cable. | Verify all input/output cables are securely connected; increase Gain Input; activate Phantom Power for condenser mics; try different cables. |
| So distorsionat | Gain too high (clipping); faulty tube; incorrect impedance. | Reduce Gain Input; check OUTPUT LEVEL LEDs for clipping; if distortion persists, consult service for tube inspection; ensure proper impedance matching. |
| Zum o soroll | Bucle de terra; cables defectuosos; interferències d'altres aparells electrònics. | Use balanced cables; try isolating power; move unit away from other electronic devices; check for faulty cables. |
Especificacions
- Model: TMP-1
- Tipus de tub: 12AX7 Vacuum Tube
- Potència fantasma: +48V (canviable)
- Entrades: XLR Balanced, 1/4-inch (6.35mm) Unbalanced
- Sortides: XLR Balanced, 1/4-inch (6.35mm) Unbalanced
- Font d'alimentació: AC 9V (included adapter)
- Dimensions del producte: 9.5 x 6 x 3.5 polzades (24.13 x 15.24 x 8.89 cm)
- Pes de l'article: 2.6 lliures (1.18 kg)
- Fabricant: Dynasty Proaudio
- Data de primera disponibilitat: 19 d'agost de 2024
Garantia i Suport
For warranty information and technical support, please contact DYNASTY PROAUDIO directly.
Visit the official DYNASTY PROAUDIO Store on Amazon for more information: DYNASTY PROAUDIO Store
Conserveu el vostre comprovant de compra per a reclamacions de garantia.
