1. Introducció
Gràcies per la compraasing the KGUSS Topping B100 Mono Pure Power Amplifier. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and safety.
2. Informació de seguretat
- No exposeu aquest dispositiu a la pluja o la humitat.
- No desmunteu la unitat. Encarregueu tot el manteniment a personal qualificat.
- Assegureu-vos una ventilació adequada per evitar el sobreescalfament.
- Use only the provided power adapter and cable.
- Mantingueu el dispositiu allunyat de fonts de calor, llum solar directa i camps magnètics forts.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- TOPPING B100 Mono Power Ampmés viu
- Adaptador d'alimentació CA a CC
- Cable CA
- Targeta d'informació del producte
Imatge: Diagram showing a stereo setup with two B100 units and a list of included accessories.
4. Producte acabatview
4.1 Tauler frontal
Imatge: Diagram of the B100 front panel with labeled components.
- Indicador d'alimentació: Mostra l'estat de l'energia.
- Interruptor d'alimentació: Touch to turn on the unit; touch and hold to enter standby state.
- Balanced Combo Input (XLR + 6.35mm TRS): Input for balanced audio sources.
- Interruptor d'entrada: Selects between balanced and single-ended inputs.
- Single-Ended Input (RCA): Input for single-ended audio sources.
- + Speaker Output (4mm jack): Positive terminal for speaker connection.
- - Speaker Output (4mm jack): Negative terminal for speaker connection.
- Gain Setting (H/M/L): Ajusta el amplifier's gain level.
- Firmware Upgrade Interface: USB-C port for firmware updates only.
- 12V Trigger In (3.5mm jack): For synchronized power on/off with other devices.
- Power Input (DC38V): Es connecta a l'adaptador de corrent.
4.2 Panell posterior
Imatge: Diagram of the B100 rear panel with labeled input/output ports and controls.
5. Configuració
5.1 Connexió a l'alimentació
It is recommended to first connect the power adapter to the unit's power port, and then turn on the power. Use the provided AC to DC power adapter and AC cable.
5.2 Connexió de fonts d'entrada
The B100 supports both balanced (XLR/TRS) and single-ended (RCA) inputs.
- Connect your audio source (e.g., DAC, preamp) a la BAL (XLR/TRS combo) or SE (RCA) input ports on the rear panel.
- Utilitza el Interruptor d'entrada on the front panel to select the corresponding input.
5.3 Connectar altaveus
The B100 features speaker terminals compatible with banana plugs, bare wire, or Y-insertion.
- Endolls de plàtan: Inseriu l'endoll plàtan a l'extrem del terminal corresponent.
- Bare Wire/Y-insertion: Unscrew the crystal case counter-clockwise. Insert stripped metal speaker wires into the round holes or Y-terminals around the periphery of the posts. Do not let bare speaker wires touch each other or the case of this unit. Finally, tighten the crystal case.
- Ensure correct polarity (+ to + and - to -) for each speaker.
Imatge: Detailed diagram showing how to connect input sources and speakers to the B100 ampmés viu.
Connexió del disparador de 5.4 12V
The B100 is equipped with a 12V Trigger input interface, allowing for linked power on/off with other devices. Connect a 3.5mm trigger cable from a compatible device to the Entrada de disparador de 12 V port on the B100's rear panel. This enables simultaneous turn on or off of all devices that support this feature.
5.5 Stereo System Setup
When building a stereo system, two B100 units are required to drive two passive speakers respectively. Each B100 will handle one channel (left or right) from your DAC/preamp.
6. Funcionament
6.1 Power On/Off/Standby
Toca el Interruptor d'alimentació on the front panel to turn the unit on. Touch and hold the Interruptor d'alimentació per entrar al mode d'espera.
6.2 Selecció d'entrada
Utilitza el Interruptor d'entrada on the front panel to toggle between the balanced (BAL) and single-ended (SE) inputs.
6.3 Ajust de guany
The B100 provides three gain adjustments: H (Alt), M (Medium), and L (Low). Select the appropriate gain level based on your speakers' sensitivity and listening preferences.
6.4 Control de volum
The B100 is a pure power amplifier and does not feature its own volume control. Volume adjustment should be managed by your connected preamplifier or DAC with preamp funcionalitat.
7. Manteniment
- Netegeu la unitat amb un drap suau i sec. No utilitzeu netejadors líquids ni aerosols.
- Avoid blocking the ventilation slots to ensure proper heat dissipation.
- Disconnect the power adapter if the unit will not be used for an extended period.
8. Solució De Problemes
If you encounter any issues with your B100 amplifier, please refer to the table below or watch the troubleshooting video for guidance.
Imatge: Troubleshooting table for common issues with the B100 ampmés viu.
| Fenomen | Solució |
|---|---|
| Can't be turned on | Check the power adapter. Only connect the power adapter to a power outlet, not to the unit. If the LED on the adapter blinks or does not light up, the adapter is defective. Check the power connection. |
| Sense so | The device did not power on. Check LED and the power connection. Check that the proper input source is selected in the rear panel. Check the connections for all devices. Insert connection cables all the way in. Check the volume of all devices. |
| So anormal | One channel's positive output and negative output may be reversed, please check and correct it. The cables may not be connected correctly, check and reconnect them. Probably overloaded. Try turning down the volume of the source or turning down the gain on the B100. Check to see if the problem is with the source, downstream equipment and cables. |
| Fault code A=2, B=2 or A=2, B=3 | Firmware is abnormal. Unplug the power cable and plug in the USB-C to the FW port and plug in the USB-C to the FW port to the unit. |
| Fault code A=1, B=1 or A=1, B=2 | Negative and positive voltage abnormal. Check the power adapter. Only connect the power adapter to a power outlet, not to the unit. If the LED on the adapter blinks or does not light up, the adapter is defective. Check the power connection. If the problem still persists after disconnecting the other devices and restarting it, the unit may be defective. Please contact the store where you purchased it. |
| Fault code A=1, B=3 | Amplifier circuit outputs abnormal DC voltage. After changing the song, turning down the source volume and turning down the gain of the unit, unplug and re-plug the power cable and reboot the unit. If the problem still persists after disconnecting the other devices and restarting it, the unit may be defective. Please contact the store where you purchased it. |
| Fault code A=1, B=4 | The protection circuit has been activated due to a rise in temperature within this unit. Reboot B100 after the unit cools down. Please put the unit in a place having good ventilation. |
| Fault code A=1, B=5 | Too low load impedance or short-circuit load. Check if the output is short-circuited, the load impedance is too low or the load is short-circuited. |
| The usage of the USB port | For firmware upgrade only. |
8.1 Troubleshooting Video
Vídeo: A short troubleshooting guide for common issues with the TOPPING B100 amplifier, provided by HIFI College.
9. Especificacions
The following table details the technical specifications of the KGUSS Topping B100 Mono Pure Power Ampmés viu:
Imatge: Detailed table outlining the electrical and performance specifications of the B100 ampmés viu.
| Especificació | Valor |
|---|---|
| Dimensions del producte | 7.87 x 5.79 x 1.73 polzades |
| Pes de l'article | 4.4 lliures |
| Número de model de l'article | TOPPING B100 |
| Fabricant | REALITZACIÓ |
| THD+N a 1 kHz (A-wt) | <0.00008% @4Ω 5W (BAL), <0.00008% @8Ω 5W (SE) |
| SNR (pes A) | 151dB (BAL), 149dB (SE) |
| Interval dinàmic @ 1 kHz (A-wt) | 151dB (BAL), 149dB (SE) |
| Potència de sortida | 100W @4Ω THD+N<1% (BAL), 100W @4Ω THD+N<1% (SE) |
| Impedància de càrrega | ≥4Ω |
10. Garantia i Suport
KGUSS is committed to customer satisfaction. Your TOPPING B100 amplifier comes with:
- A 30-day money-back guarantee for any reason.
- More than 1 year quality restoration, covering repair and shipping costs for quality defects.
- 30-day price matching.
For any questions or support, please contact HIFI College, the authorized retailer, who is ready to answer any questions 24/7.
