1. Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Bafang 48V 750W Mid Drive Ebike Conversion Kit, model BBS02B. This kit is designed to transform standard bicycles, particularly mountain bikes, into powerful electric bikes, enhancing your riding experience with robust performance and efficiency. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
2. Informació de seguretat
Always prioritize safety when installing and operating your ebike conversion kit. Failure to follow these guidelines may result in injury or damage to the product.
- Ensure the bicycle frame and components are in good condition and suitable for an ebike conversion.
- Disconnect the battery before performing any installation, maintenance, or repair work.
- Utilitzeu l'equip de seguretat adequat, inclosos guants i protecció ocular, durant la instal·lació.
- Do not modify the motor, battery, or any electrical components. Unauthorized modifications can lead to malfunction and void the warranty.
- Keep all electrical connections dry and free from dirt or debris.
- Familiarize yourself with local regulations regarding ebike usage, speed limits, and power output.
- Perform a thorough safety check of your converted ebike before each ride, including brakes, tires, and all connections.
- Do not immerse the motor or battery in water.
3. Contingut del paquet
Verify that all components listed below are present in your package. If any items are missing, please contact customer support immediately.
Figura 3.1: Mésview of the Bafang BBS02B Mid Drive Ebike Conversion Kit components.
- 1x Bafang Mid-Drive Motor 48V 750W (BBS02B)
- 1x SW-M58 LCD Display
- 1x Thumb Throttle
- 1x Chainring (Standard 44T, with guard)
- 1x Pair of Crank Arms
- 1x Pair of Speed Sensors and Magnet
- 1x 1T4 EB-BUS Cable
- 1 bossa de cargols de muntatge
- 1x Mechanical Brake Levers (default) or Brake Sensors
- 1x far
- 1x 48V 20Ah Shark Battery (if included in your specific package)
- Installation Tools (wrench, crank removal tool, bottom bracket remover)
4. Configuració i instal·lació
Follow these steps carefully to install your Bafang mid-drive kit. Professional installation is recommended if you are unsure about any step.
4.1. Motor Compatibility and Preparation
The Bafang BBS02B motor is compatible with bicycles having a 68-73mm bottom bracket shell and an internal diameter between 33.5-36mm. It fits JIS standard bikes, including most mountain and city models.
Figure 4.1: Bottom bracket compatibility and dimensions for motor installation.
- Remove the existing crankset and bottom bracket from your bicycle.
- Clean the bottom bracket shell thoroughly.
- Ensure the bottom bracket shell dimensions match the motor's requirements (68-73mm width, 33.5-36mm inner diameter).
4.2. Instal·lació del motor
Slide the motor into the bottom bracket shell. Secure it using the provided lock nuts and mounting screws. Ensure the motor is firmly seated and aligned.
Figure 4.2: Bafang 48V 750W Mid Drive Motor installed.
4.3. Display (SW-M58) Installation
Mount the SW-M58 LCD display on your handlebar. It universally fits Ø22.2mm handlebars. Connect the display cable to the main wiring harness.
Figure 4.3: SW-M58 LCD Display features and dimensions.
4.4. Instal·lació de la bateria
Install the 48V 20Ah Shark Battery onto the bicycle downtube using the provided mounting bracket. Ensure it is securely locked in place. The battery features a network switch for consumption control and a USB charging port.
Figure 4.4: Battery parameters and dimensions.
4.5. Connexions de cablejat
Connect all components according to the wiring diagram. This includes the display, throttle, brake levers/sensors, speed sensor, and headlight to the main 1T4 EB-BUS cable and motor controller.
Figure 4.5: Comprehensive wiring diagram for the kit.
- Connect the main motor cable to the battery.
- Connect the 1T4 EB-BUS cable to the motor.
- Connect the display, throttle, and brake levers/sensors to the 1T4 cable.
- Install the speed sensor on the chainstay and attach the magnet to a spoke. Ensure proper alignment for accurate readings.
- Connect the headlight if applicable.
- Secure all cables with zip ties to prevent snagging and damage.
5. Instruccions de funcionament
Understand the various modes and functions of your Bafang ebike kit for an optimal riding experience.
5.1. Modes de conducció
The Bafang BBS02B motor supports three primary riding modes:
- Mode elèctric pur: Engaged via the thumb throttle, providing power without pedaling.
- Pedal-Assisted Mode (PAS): The motor provides assistance as you pedal. The level of assistance can be adjusted via the display.
- Physical Riding Mode: The motor is off, and the bike operates as a standard bicycle, relying solely on pedal power.
5.2. SW-M58 LCD Display Functions
The 3.8" SW-M58 LCD display provides essential information and control over your ebike system. Its bright, glare-resistant screen ensures clear visibility.
- Encès/apagat: Manteniu premut el botó d'engegada per encendre o apagar el sistema.
- Ajust del nivell PAS: Use the up/down buttons to cycle through pedal assist levels (e.g., 3, 5, or 9 levels depending on configuration).
- Visualització d'informació: View current speed, battery level, trip distance, total odometer, and error codes.
- Control dels fars: The display may have a button to turn the connected headlight on/off.
- Codis d'error: If an error occurs, an error code will be displayed. Refer to the troubleshooting section for common codes.
6. Manteniment
Regular maintenance ensures the longevity and reliable performance of your Bafang ebike conversion kit.
- Neteja: Clean the motor, battery, and display regularly with a damp drap. Eviteu rentar directament els components elèctrics a alta pressió.
- Cura de la bateria:
- Charge the battery fully after each ride, especially if it will be stored for an extended period.
- Guardeu la bateria en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- No descarregueu completament la bateria amb freqüència.
- Connexions: Periodically check all electrical connections for tightness and corrosion. Ensure cables are not pinched or damaged.
- Components mecànics: Regularly inspect the chainring, crank arms, and bottom bracket for wear and tear. Lubricate the chain as needed.
- Frens: Ensure your brakes are functioning correctly and adjust them as necessary.
- Pneumàtics: Maintain proper tire pressure for safety and efficiency.
7. Solució De Problemes
This section addresses common issues you might encounter. For problems not listed here, please contact technical support.
| Codi de problema/error | Causa possible | Solució |
|---|---|---|
| Motor not providing power | Battery low or disconnected; loose electrical connections; system not turned on. | Check battery charge and connection; ensure all cables are securely plugged in; turn on the display. |
| Error Code 21 (Speed Sensor) | Speed sensor misaligned or damaged; magnet missing or improperly placed; faulty wiring. | Check speed sensor alignment and distance from magnet (typically 3-5mm); ensure magnet is securely attached to a spoke; inspect sensor wiring for damage. If the issue persists, the sensor or controller may need replacement. |
| La pantalla no s'encén | Battery not connected or discharged; loose display cable; faulty display. | Verify battery connection and charge; check display cable connection to the 1T4 cable; contact support if display remains unresponsive. |
| L'accelerador no funciona | Throttle cable disconnected or damaged; throttle malfunction. | Check throttle cable connection; test throttle functionality. |
8. Especificacions
Detailed technical specifications for the Bafang 48V 750W Mid Drive Kit BBS02B.
| Component/Característica | Especificació |
|---|---|
| Tipus de motor | Bafang BBS02B Brushless Gear Motor |
| Motor Voltage | 48 V |
| Potència del motor | 750W |
| Max Torque | 120 Nm |
| Controlador | Integrated in the motor |
| Bottom Bracket Compatibility | 68-73mm (JIS standard) |
| Bottom Bracket Inner Diameter | 33.5-36 mm |
| Encadenament | 44T (standard, optional 36T/42T/52T) |
| Mostra | SW-M58 LCD (3.8" screen, Ø22.2mm handlebar fit) |
| Bateria (opcional) | 48V 20Ah Shark Battery (960Wh, 367x127x90mm, 4.8kg) |
| Velocitat màxima (assistiva) | Fins a 45 km/h |
| Material | Alumini |
| Fabricant | Bafang Electric (Suzhou) Co., Ltd. |
Figure 8.1: Key specifications of the Bafang Mid Drive Kit.
9. Garantia i Suport
Bafang is committed to providing reliable products and excellent customer service.
9.1. Suport tècnic
Our experienced technical support team, based in the UK and Poland, is available to assist you with any installation issues or technical assistance you may require. Please do not hesitate to contact us via email for prompt attention.
For support, please refer to the contact information provided with your purchase documentation or visit the official Bafang weblloc.
9.2. Informació de la garantia
This product comes with a manufacturer's warranty covering defects in materials and workmanship under normal use. The warranty period and terms may vary. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, unauthorized modifications, misuse, neglect, accidents, or normal wear and tear.
