Stelpro SOA2002WCW

Manual d'instruccions de l'escalfador de paret Stelpro SOA2002WCW

Model: SOA2002WCW | Brand: Stelpro

1. Instruccions de seguretat importants

Please read all instructions carefully before installing and using this heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or death. Keep this manual for future reference.

  • Connexió elèctrica: This heater requires a 240V hardwired connection. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
  • Ubicació: Do not install the heater directly below a permanent electrical outlet. Maintain minimum clearances from walls, furniture, and other combustible materials as specified in the installation section.
  • Exposició a l'aigua: Do not install the heater in areas where it may be exposed to water spray or splashes. This unit is designed for indoor use only.
  • Supervisió: Close supervision is necessary when any heater is used by or near children or invalids, and whenever the heater is left operating and unattended.
  • Obstrucció: No introduïu ni deixeu que entrin objectes estranys a cap obertura de ventilació o d'escapament, ja que això podria provocar una descàrrega elèctrica o incendi, o danyar l'escalfador.
  • Manteniment: Disconnect power before servicing or cleaning the heater.

2. Producte acabatview

The Stelpro SOA2002WCW is a 2000W wall-mounted fan heater from the OASIS Series, designed for efficient and quiet heating in various indoor spaces. It features a durable construction and is controlled via an external wall thermostat (sold separately).

Stelpro SOA2002WCW Wall Heater, front-side view.

This image shows the Stelpro SOA2002WCW Wall Heater from a front-side angle, highlighting its compact and modern white design.

Característiques principals:

  • Calefacció d'alta eficiència: Delivers up to 2000W of heat on a 240V circuit (1500W on 208V).
  • Funcionament ultra silenciós: Equipped with a centrifugal fan for minimal noise output.
  • Disseny durador: Constructed with a high-performance polymer cabinet and satin-finish steel front.
  • Instal·lació flexible: Can be recessed or surface mounted.
  • Control del termòstat: Compatible with an external wall thermostat (sold separately).
Stelpro SOA2002WCW Wall Heater installed in a modern bathroom.

The Stelpro SOA2002WCW Wall Heater is shown installed on a wall in a contemporary bathroom setting, demonstrating its integration into a living space.

3. Especificacions

CaracterísticaDetall
ModelSOA2002WCW
MarcaStelpro
Potència/Wattage2000 W (240 V) / 1500 W (208 V)
Voltage240 Volts
ColorBlanc
Pes de l'article4.8 kg
Dimensions del producte (P x A x A)12.1D x 28.6W x 40.6H Centimetres (4 1/8" D x 11 1/4" W x 15 13/16" H)
Tipus de muntatgeSuport de paret (encastat o de superfície)
Característiques especialsAdjustable Temperature (via external thermostat), Energy Efficient, Fast Heating, Lightweight, Noiseless
Dimensional drawing of Stelpro SOA2002WCW Wall Heater.

This image provides a detailed dimensional drawing of the Stelpro SOA2002WCW Wall Heater, including measurements in inches and millimeters for height, width, and depth.

Chart for selecting heating device wattage based on room area.

A chart titled 'How to choose your heating device?' which provides guidance on determining the required wattage based on the area to be heated in square feet.

4. Instal·lació (Configuració)

The Stelpro SOA2002WCW Wall Heater is designed for permanent installation and requires a 240V hardwired electrical connection. It can be either recessed into the wall or surface-mounted.

4.1 Llista de comprovació prèvia a la instal·lació:

  • Ensure power to the circuit breaker is OFF before starting any electrical work.
  • Comproveu que el volum de subministramenttage matches the heater's requirements (240V).
  • Confirm you have an external wall thermostat (sold separately) for control.
  • Gather necessary tools: screwdriver, wire strippers, drill, level, measuring tape.

4.2 Opcions de muntatge:

Instal·lació encastada: Requires cutting an opening in the wall according to the heater's dimensions. Ensure there are no studs or obstructions in the desired location.

Instal·lació superficial: The heater can be mounted directly onto the wall surface. Ensure the mounting surface is flat and capable of supporting the heater's weight.

4.3 Connexió elèctrica:

This heater must be connected to a dedicated 240V circuit by a qualified electrician. The connection involves hardwiring the heater's supply wires to the building's electrical system within a junction box.

Diagram showing 240V hardwired connection for the heater.

This diagram illustrates the required 240V hardwired electrical connection for the Stelpro SOA2002WCW Wall Heater, showing wires connecting within a junction box.

Refer to the detailed wiring diagram provided with the product packaging for specific connection points and wire colors. Ensure all connections are secure and insulated.

5. Funcionament

The Stelpro SOA2002WCW Wall Heater operates in conjunction with an external wall thermostat (sold separately). This model does not include a built-in thermostat.

5.1 Engegada inicial:

  1. After installation is complete and verified, turn on the power at the circuit breaker.
  2. Set your external wall thermostat to the desired temperature.
  3. The heater will begin to operate, circulating warm air into the room.

5.2 Control de temperatura:

Adjust the temperature setting on your external wall thermostat to increase or decrease the heat output. The heater will cycle on and off to maintain the set temperature.

5.3 Ultra-Quiet Operation:

This heater is designed with a centrifugal fan to minimize operational noise, making it suitable for bedrooms and living areas where quietness is desired.

5.4 Heat Boost Mode:

The OASIS series heaters are equipped with a heat boost mode for rapid heating. This mode is typically activated via the external thermostat, if supported, or automatically when a significant temperature difference is detected.

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your Stelpro wall heater. Always disconnect power at the circuit breaker before performing any maintenance.

6.1 Neteja:

  • Exterior: Netegeu les superfícies exteriors amb un damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
  • Entrada/sortida d'aire: Periodically vacuum the air intake and outlet grilles to remove dust and debris. Ensure these openings are never blocked.

6.2 Annual Inspection:

It is recommended to have a qualified electrician inspect the heater and its electrical connections annually to ensure all components are in good working order and free from wear or damage.

7. Solució De Problemes

Si el vostre escalfador no funciona correctament, consulteu la taula següent abans de contactar amb el servei d'atenció al client.

ProblemaCausa possibleSolució
L'escalfador no s'encén.Sense font d'alimentació.
El termòstat està massa baix.
Comproveu l'interruptor.
Augmenta la configuració del termòstat.
Sortida de calor insuficient.Ajust del termòstat massa baix.
Air intake/outlet blocked.
La mida de l'habitació supera la capacitat de la calefacció.
Augmenta la configuració del termòstat.
Netegeu qualsevol obstacle.
Assegureu-vos que l'escalfador estigui aiguattage is appropriate for the room area (refer to selection chart).
Soroll inusual durant el funcionament.Components solts.
Restes al ventilador.
Disconnect power and inspect for loose parts. If debris is suspected, contact a qualified technician.
Heater cycles on/off too frequently.Thermostat location.
Protecció contra sobreescalfament activada.
Ensure thermostat is not in a drafty area or near another heat source. Check for blocked airflows.

If the problem persists after attempting these solutions, please contact Stelpro customer support.

8. Garantia i Suport

Stelpro products are proudly made in Canada and are designed for quality and performance.

8.1 Informació sobre la garantia:

For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Stelpro weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

8.2 Atenció al client:

If you require assistance with installation, operation, or troubleshooting, please contact Stelpro customer service:

  • Telèfon: +1 844-783-5776
  • Adreça: 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 6L7, Canadà
  • Weblloc: www.stelpro.com

Documents relacionats - SOA2002WCW

Preview Guia d'instal·lació i especificacions de l'escalfador d'espai Stelpro sèrie ASKS
Guia d'instal·lació oficial per a l'escalfador Stelpro de la sèrie ASKS, que inclou especificacions tècniques, avisos de seguretat, procediments de manteniment, consells per a la resolució de problemes i informació sobre la garantia limitada.
Preview Guia d'instal·lació de l'escalfador d'espai Stelpro sèrie ASKS
Guia d'instal·lació, funcionament i manteniment de l'escalfador d'espai Stelpro sèrie ASKS. Inclou especificacions tècniques, resolució de problemes i informació sobre la garantia.
Preview Manual del propietari i guia d'instal·lació del termòstat no programable STELPRO ST252NP, ST302NP, ST402NP
Guia completa per a la instal·lació i el funcionament dels termostats electrònics no programables STELPRO ST252NP, ST302NP i ST402NP per a sòcols i convectors. Inclou especificacions tècniques, característiques i informació sobre la garantia.
Preview Stelpro ACW750 & ACW1000 Architectural Cabinet Heaters: Specifications & Features
Explore the Stelpro ACW750 and ACW1000 architectural cabinet heaters. Designed for high-powered, quiet heating in commercial and public spaces. This document details features, technical specifications, available accessories, and installation drawings.
Preview Manual del propietari del termòstat electrònic programable STELPRO ST402PFF
Manual d'usuari detallat del termòstat electrònic programable STELPRO ST402PFF, que cobreix la instal·lació, la programació, les característiques i les especificacions tècniques dels calefactors de base, convectors i ventiladors.
Preview Guia de l'usuari de l'escalfador elèctric de rentat industrial/comercial Stelpro sèrie SWU
Guia de l'usuari per a l'escalfador elèctric de rentat industrial/comercial Stelpro sèrie SWU, que cobreix la instal·lació, el funcionament i el manteniment.