XTOOL IP500 for BMW OBD2 Scanner User Manual

1. Introducció

The XTOOL IP500 is a specialized automotive diagnostic tool designed for BMW, MINI, and Rolls-Royce vehicles. It offers comprehensive system diagnostics, advanced ECU coding, bi-directional control (active tests), and a wide range of maintenance services. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your IP500 device.

Figure 1.1: XTOOL IP500 Diagnostic Tool

Figura 1.2: Característiques clauview of XTOOL IP500

2. Què hi ha a la caixa

Upon unboxing your XTOOL IP500, please verify that all the following components are included:

• 1x XTOOL IP500 for BMW OBD2 SCANNER
• 1x USB to Type-C Main Cable
• 1x VGA to OBD2-16 Main Cable
• 1x Quick Guide Package Listing

Figure 2.1: Contents of the XTOOL IP500 Package

3. Especificacions tècniques

4. Guia de configuració

4.1 Engegada i càrrega inicials

Before first use, ensure the IP500 device is fully charged. Connect the provided USB to Type-C cable to the device and a suitable power adapter. The device will indicate charging status on the screen.

4.2 Connexió al vehicle

To begin diagnostics, connect the IP500 to your vehicle's OBD2 port. The OBD2 port is typically located under the dashboard on the driver's side. Use the VGA to OBD2-16 Main Cable for connection.

1. Locate the vehicle's OBD2 diagnostic port.
2. Plug the VGA end of the cable into the IP500 device.
3. Plug the OBD2-16 pin connector into the vehicle's OBD2 port.
4. Gireu el contacte del vehicle a la posició 'ON' (motor apagat).
5. The IP500 device will automatically power on and establish communication with the vehicle.

Figure 4.1: Connecting the IP500 to a Vehicle

5. Instruccions de funcionament

5.1 Navegació al menú principal

After successful connection, the IP500's main menu will appear. Use the touchscreen to navigate through the various functions:

• Escaneig automàtic: Automatically identifies the vehicle and performs a full system scan.
• Diagnòstic: Allows manual selection of vehicle make, model, and system for specific diagnostic functions.
• OBD II: Provides standard OBD2 functions for emissions-related diagnostics.
• Funció especial: Accesses various maintenance and reset services.
• Actualitzacions: Manages software updates for the device.
• Més: Contains additional settings and information.

5.2 Diagnòstic complet del sistema

The IP500 can scan over 30 control units, providing in-depth diagnostics beyond generic OBD2 tools. This includes modules like DSC (Dynamic Stability Control), FRM (Footwell Module), CAS (Car Access System), and Battery Management. It reads fault codes, displays live data, and captures freeze frames.

Figure 5.1: Full System Scan Tool Interface

Figure 5.2: Comprehensive Full Systems Diagnosis

Examples of diagnostic capabilities:

• ABS Diagnosis: Reads and clears fault codes, checks sensors, and tests the ABS module to identify issues, ensuring proper ABS operation and braking safety.

Figura 5.3: Diagnòstic del sistema ABS
• SRS Diagnosis: Reads and clears airbag system fault codes, checks sensors, and resets warning lights after repairs, ensuring proper airbag system function.


Figura 5.4: Diagnòstic del sistema SRS

• Engine Diagnosis: Helps locate the cause of check engine lights and clear fault codes, addressing issues like poor combustion.


Figura 5.5: Diagnòstic del sistema del motor

• Transmission Diagnosis: Assists in quickly identifying transmission issues and reading fault codes, allowing for timely repairs and clearing warning lights.

Figura 5.6: Diagnòstic del sistema de transmissió

5.3 Control bidireccional (prova activa)

The Active Test function allows you to send commands to vehicle systems and components to test their functionality directly. This helps pinpoint faulty parts quickly without manual checks.

Figure 5.7: Bi-Directional Control Interface

ExampLes proves actives inclouen:

• A/C Test: Diagnoses A/C system issues like low refrigerant or compressor failure.


Figure 5.8: A/C System Test

• Wipers Test: Checks the functionality of the vehicle's wiper system.

Figure 5.9: Wiper System Test
• Lights Test: Checks the operation of headlights, taillights, brake lights, and turn signals.


Figure 5.10: Vehicle Lighting Test

• Windows/Mirrors/Doors Test: Checks the smooth movement and proper function of windows, mirrors, and doors.


Figure 5.11: Window, Mirror, and Door Function Test

5.4 Codificació de la ECU

The IP500 supports ECU Coding, allowing you to customize OE settings, activate hidden factory features, and integrate aftermarket upgrades by matching ECU settings. This includes features like auto-folding mirrors, custom ambient lighting, or remembering auto start/stop preferences.

NOTE: ECU coding capabilities are model-specific. Please confirm compatibility for your vehicle before attempting coding procedures.

Figure 5.12: Advanced ECU Coding Capabilities

Figure 5.13: Scenarios for ECU Coding

5.5 Special Functions (Maintenance Services)

The IP500 provides 23 special functions for BMW, MINI, and Rolls-Royce vehicles, enabling you to perform common maintenance tasks at home.

Figura 5.14: Mésview of Maintenance Services

Figure 5.15: Detailed Menu of Maintenance Services

Key special functions include:

• Restabliment del servei d'oli: Clears "Oil Service Due" alerts after oil changes.
• Adaptació de l'accelerador: Resolves rough idling and throttle lag.
• Restabliment de l'EPB (fre d'estacionament electrònic): For brake pad replacement.
• Calibratge SAS (sensor d'angle de direcció): Realigns the steering wheel's memory after repairs.

Figure 5.16: Steering Angle Reset Procedure
• Sagnat de l'ABS: Flushes air from brake lines to fix spongy brakes.


Figure 5.17: ABS Bleeding Process

• Codificació de l'injector: Calibrates individual fuel injectors to the engine control unit (ECU) for precise fuel delivery.


Figure 5.18: Injector Coding Explanation

• BMS (Battery Management System) Reset / Battery Registration: Registers new batteries to the ECU to prevent premature failure and clear "Battery Discharge" warnings.

Figure 5.19: Battery Registration Steps


Figure 5.20: Importance of Battery Registration

NOTE: Special functions vary by vehicle. Access these functions via "Diagnose > Brand > System Selection > Special Function".

5.6 Multi-in-One Live Data Graph

The IP500 allows you to view live data streams from various sensors and modules in a graphical format. It can overlay up to four sensor waveforms simultaneously, which helps in diagnosing intermittent issues and identifying emission faults.

Figure 5.21: Multi-in-One Live Data Graph

Figure 5.22: Benefits of Multi-in-One Live Data Graphing

5.7 Funcions OBD2 completes

The IP500 supports all standard OBD2 functions, essential for emissions-related diagnostics and smog checks:

• Llegir/Esborrar codis
• Congela les dades del fotograma
• Flux de dades en directe
• Preparació I/M
• Prova del sensor d’O2
• Prova de monitor a bord
• Prova del sistema EVAP
• Informació del vehicle (VIN, CID, CVN)

6. Manteniment

6.1 Actualitzacions de programari

The XTOOL IP500 offers lifetime free Wi-Fi software updates. Regularly updating your device ensures you have the latest software, vehicle coverage, and diagnostic technologies.

1. Connect the IP500 to a stable Wi-Fi network.
2. Navigate to the 'Updates' section on the main menu.
3. Follow the on-screen prompts to download and install available updates.

Figure 6.1: Lifetime Free WiFi Updates

6.2 Neteja i cura

Per garantir la longevitat del dispositiu:

• Netegeu la pantalla i l'exterior amb un drap suau iamp tela. Eviteu els netejadors abrasius.
• Keep the device away from excessive moisture, dust, and extreme temperatures.
• Store the device in its original packaging or a protective case when not in use.

7. Solució De Problemes

If you encounter issues with your XTOOL IP500, consider the following common solutions:

• El dispositiu no s'encén: Ensure the device is fully charged or connected to a power source. Check the connection to the vehicle's OBD2 port.
• Error de comunicació amb el vehicle: Verify the OBD2 cable is securely connected to both the device and the vehicle. Ensure the vehicle's ignition is in the 'ON' position. Try a different vehicle to rule out a vehicle-specific issue.
• Functions not available for my vehicle: Not all functions are supported on all vehicle models. Refer to the product compatibility list or contact support to confirm specific function availability for your vehicle's year, make, and model.
• Software update issues: Ensure a stable internet connection. If the update fails, try restarting the device and attempting the update again.
• La pantalla no respon: Prova de reiniciar el dispositiu. Si el problema persisteix, contacta amb l'assistència tècnica.

For persistent issues or advanced technical support, please refer to the support section.

8. Compatibilitat del vehicle

The XTOOL IP500 is specifically designed to support 99% of models for BMW, MINI, and Rolls-Royce vehicles.

• For BMW: Compatible with BMW 1-8 Series, X Series, Z Series, M Series, etc.
• For MINI: Compatible with MINI Cooper, Clubman, Countryman, Cabrio, Paceman, Roadster, etc.
• For Rolls-Royce: Compatible with Rolls-Royce Phantom, Ghost, Wraith, Dawn, Cullinan, etc.

NOTE: Some specific models may not be supported. It is recommended to confirm compatibility with XTOOL technical support before purchase if you have a unique or older model.

Figure 8.1: Broad Compatibility for BMW Family Vehicles

9. Garantia i Suport

9.1 Actualitzacions gratuïtes de per vida

The XTOOL IP500 comes with lifetime free Wi-Fi software updates, ensuring your device remains current with the latest vehicle data and diagnostic capabilities without additional fees.

9.2 Suport tècnic

For any technical inquiries, operational assistance, or troubleshooting beyond this manual, please contact XTOOL customer support:

• Correu electrònic: xtoolinplusus@outlook.com

When contacting support, please provide your device's serial number and a detailed description of the issue to facilitate a quicker resolution.