STINGER CTSGM-49

Connects2 CTSGM-49 Radio Replacement Module User Manual

Model: CTSGM-49 | Brand: STINGER

Introducció

The Connects2 CTSGM-49 Radio Replacement Module is designed to facilitate the installation of an aftermarket car stereo in select GM vehicles manufactured between 2004 and 2016. This module ensures the retention of critical factory functions, including steering wheel controls and various vehicle chimes, while preventing fault codes in the vehicle's Electronic Control Module (ECM).

Característiques del producte

  • Radio Replacement Simplification: Streamlines the integration of an aftermarket head unit into your vehicle's existing electrical system.
  • Retenció del control del volant (SWC): Maintains the functionality of your factory steering wheel buttons for audio control (volume, track, etc.).
  • Factory Chime Retention: Preserves all original vehicle chimes, including safety and warning alerts (e.g., low fuel, seatbelt, park assist).
  • ECM Fault Code Prevention: Sends correct data to the vehicle's ECM to prevent fault codes that can occur when the factory radio is removed, ensuring proper vehicle diagnostics.
  • Accessory Power Output: Provides a +12V switched accessory power source (rated at 0.3A) for the aftermarket radio. Note: This output is not intended to power the head unit directly.

Contingut del paquet

Connects2 CTSGM-49 Radio Replacement Module with wiring harnesses and chime speaker

The Connects2 CTSGM-49 package includes the following components:

  • Connects2 CTSGM-49 Radio Replacement Module
  • Vehicle-specific Wiring Harnesses
  • Chime Speaker (for factory chime retention)

Image shows the main module, various wiring harnesses for vehicle integration, and a small speaker for retaining factory chimes.

Compatibilitat de vehicles

This module is compatible with a range of GM vehicles. Please refer to the table below to confirm your vehicle's compatibility and supported steering wheel control functions. Note that some vehicles may not be compatible if fitted with factory navigation for specific model years.

Vehicle Compatibility Table for Connects2 CTSGM-49 module

The table details compatible Buick, Chevrolet, GMC, Hummer, Pontiac, Saturn, and Suzuki models, their respective years, harness type (A, B, C), and whether Steering Wheel Control (SWC) functions are supported (Y/N). Specific notes regarding factory navigation compatibility are also included.

Key Compatibility Notes:

  • Buick: Enclave (2008-2012), Lucerne (2006-2010)
  • Chevrolet: Avalanche (2007-2013), Cobalt (2005-2010), Equinox (2007-2009), Express Van (2008-2016), HHR (2006-2011), Impala/Impala SS (2006-2013), Malibu (2004-2012), Monte Carlo (2006-2007), Silverado 1500-3500 (2007-2013), Suburban (2007-2014), Tahoe (2007-2014), Traverse (2009-2012). Note: Suburban/Tahoe/Sierra/Yukon models from 2012-2013 are not compatible if fitted with factory navigation.
  • GMC: Acadia (2007-2012), Savana (2008-2016), Sierra 1500-3500 (2007-2013), Yukon (2007-2014), Yukon XL (2007-2014).
  • Hummer: H2 (2008-2009)
  • Pontiac: G5 (2007-2009), G6 (2005-2009), Solstice (2007-2009), Torrent (2007-2009)
  • Saturn: Aura (2007-2009), Outlook (2008-2009), Sky (2007-2009)
  • Suzuki: XL7 (2007-2010)

Guia d'instal·lació

Installation of the CTSGM-49 module requires basic automotive electrical knowledge. It is recommended to consult a professional installer if you are unsure about any steps. Always disconnect the vehicle's battery before beginning installation.

Passos generals d'instal·lació:

  1. Preparar el vehicle: Assegureu-vos que el vehicle estigui apagat i desconnecteu el terminal negatiu de la bateria.
  2. Treure la ràdio de fàbrica: Carefully remove the existing factory radio from the dashboard.
  3. Connect Wiring Harnesses: Connect the vehicle-specific wiring harnesses from the CTSGM-49 module to the vehicle's factory wiring. Ensure all connections are secure.
  4. Connect Aftermarket Radio: Connect the other end of the CTSGM-49 harnesses to your aftermarket car stereo's wiring. Pay close attention to power, ground, speaker, and accessory wire connections.
  5. Integrate Chime Speaker: Connect the provided chime speaker to the designated output on the CTSGM-49 module. Position the speaker in a location where chimes can be clearly heard but are not obstructed.
  6. Col·locació del mòdul: Securely mount the CTSGM-49 module in a safe, dry location behind the dashboard, away from moving parts or heat sources.
  7. Sistema de prova: Reconnect the vehicle's battery. Turn on the ignition and test the aftermarket radio's functionality, including audio, steering wheel controls, and factory chimes. Verify that no new warning lights appear on the dashboard.
  8. Remunta el tauler de control: Un cop confirmades totes les funcions, torneu a muntar amb cura els components del tauler de control.

For detailed wiring diagrams and specific vehicle instructions, please refer to the comprehensive installation manual provided with your product or consult the manufacturer's weblloc.

Funcionament

Once installed, the Connects2 CTSGM-49 module operates automatically to maintain factory functions. There are no user-adjustable settings on the module itself.

Controls del volant:

Your factory steering wheel controls will function as they did with the original radio, allowing you to control basic functions of your aftermarket head unit such as:

  • Pujar/Bajar el volum
  • Pista amunt/avall (següent/anterior)
  • Selecció de mode/font
  • Call Answer/End (if supported by your aftermarket radio and vehicle)

The specific functions retained may vary slightly depending on your vehicle's original configuration and the capabilities of your aftermarket radio.

Factory Chimes:

All factory chimes (e.g., seatbelt warning, door ajar, low fuel, park assist) will continue to sound through the dedicated chime speaker provided with the module. The volume of these chimes is typically controlled by the vehicle's factory settings or is fixed.

Resolució de problemes

If you encounter issues after installing the CTSGM-49 module, consider the following common troubleshooting steps:

ProblemaCausa possibleSolució
No power to aftermarket radio.Incorrect wiring, blown fuse, or module not receiving power.Check all wiring connections, especially power and ground. Verify vehicle fuses. Ensure the module is properly connected to the vehicle's power source. Remember the module's accessory power output is 0.3A and not for powering the head unit directly.
Els comandaments del volant no funcionen.Incorrect SWC wiring, incompatible aftermarket radio, or vehicle not supported for SWC retention.Verify the SWC wires are correctly connected between the module and the aftermarket radio. Check your aftermarket radio's manual for SWC input configuration. Confirm your vehicle model and year are listed as supporting SWC in the compatibility table.
No factory chimes or chimes are too quiet/loud.Chime speaker not connected, faulty speaker, or incorrect module connection.Ensure the chime speaker is securely connected to the module. Check the speaker for damage. Verify all module connections are firm. Chime volume is typically fixed by the vehicle's system.
Check Engine Light or other warning lights appear.Module not communicating correctly with vehicle's ECM.Double-check all module connections. Ensure the module is receiving proper power and data signals. If issues persist, consult a professional installer or vehicle technician.

If troubleshooting steps do not resolve the issue, please contact STINGER customer support for further assistance.

Especificacions

  • Número de model: CTSGM-49
  • Marca: STINGER
  • Material: Estirol acrilonitril butadiè
  • Pes de l'article: 5.6 unces
  • Dimensions del paquet: 9 x 4.5 x 1.75 polzades
  • Tipus de connector: Rectangular Or Circular Connector
  • Accessory Power Output: +12V, 0.3A (max)
  • Compatibilitat: Select GM Buick/GMC/Hummer/Pontiac/Saturn/Suzuki Vehicles (2004-2016) with GM LAN 29 Bit system.

Garantia i Suport

STINGER products are designed for reliability and performance. For information regarding warranty coverage, technical support, or replacement parts, please visit the official STINGER weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

Fabricant: STINGER

Data de primera disponibilitat: 6 de setembre de 2024

For the most up-to-date support resources, please visit the STINGER Store on Amazon o el seu oficial weblloc.

Documents relacionats - CTSGM-49

Preview Guia d'instal·lació del kit de substitució de ràdio Stinger SRX-GM14128 HORIZON12 per a Silverado/Sierra
Guia d'instal·lació completa per al kit Stinger SRX-GM14128, que permet la instal·lació del sistema d'infoentreteniment multimèdia HORIZON12 de 12.8 polzades en camionetes Chevrolet Silverado i GMC Sierra del 2014 al 2019, tot conservant les característiques de fàbrica.
Preview Guia d'instal·lació de Stinger HEIGH10 UN1810E-FD5 per a Ford Transit Custom
This installation guide provides detailed instructions for fitting the Stinger HEIGH10 10-inch infotainment touch screen solution into a Ford Transit Custom (2018 onwards). It covers stereo removal, unit assembly, fascia plate setup, wiring key, steering wheel control functionality, connection steps, and technical assistance.
Preview Guia d'instal·lació del kit de substitució de ràdio Stinger SR-GM14HX HORIZON10 per a Chevrolet Silverado i GMC Sierra (2014-2019)
Guia d'instal·lació detallada per al kit de substitució de ràdio Stinger SR-GM14HX, que permet la instal·lació de la ràdio modular HORIZON10 en camionetes Chevrolet Silverado i GMC Sierra del 2014 al 2019 seleccionades. Cobreix les característiques, els components, les eines, el desmuntatge, el cablejat i la instal·lació final.
Preview Guia de l'usuari de Stinger HORIZON10 SRK-GM14HX: instal·lació i funcionament
Guia d'usuari completa per al sistema d'infoentreteniment Stinger HORIZON10 SRK-GM14HX, que cobreix la instal·lació, les funcions, la configuració i la resolució de problemes per a camionetes Chevrolet Silverado i GMC Sierra.
Preview Stinger HEIGH10 Installation Guide for Ford Ranger 2016+
Comprehensive installation guide for the Stinger HEIGH10 integrated infotainment touch screen solution for Ford Ranger 2016+ models. Includes stereo removal, fascia plate setup, and interface configuration.
Preview Kit d'instal·lació Stinger SRK-JK11HX HORIZON10 per a Jeep Wrangler JK (2011-2018) - Guia d'instal·lació
Guia d'instal·lació completa del kit d'integració Stinger SRK-JK11HX HORIZON10 per a models Jeep Wrangler JK del 2011 al 2018. Apreneu a instal·lar, connectar el cablejat i conservar les característiques del vehicle.