Introducció
Welcome to the INOVIVA Slushie Machine S1.0 user manual. This guide provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new frozen drink maker. Please read this manual thoroughly before first use.
Instruccions importants de seguretat
- Llegiu totes les instruccions abans d'utilitzar l'aparell.
- No submergiu l'aparell, el cable o l'endoll en aigua o altres líquids.
- És necessària una supervisió estreta quan qualsevol aparell és utilitzat per o a prop dels nens.
- Desendolleu la presa de corrent quan no utilitzeu i abans de netejar.
- No feu servir cap aparell amb un cable o un endoll danyats, o després que l'aparell funcioni malament o s'hagi fet malbé de cap manera.
- Utilitzeu només els accessoris recomanats o venuts pel fabricant.
- No utilitzar a l'aire lliure.
- No deixeu que el cable pengi de la vora de la taula o del taulell, ni toqui superfícies calentes.
- No col·loqueu-lo sobre o prop d'un cremador de gas o elèctric calent, ni en un forn calent.
- Connecteu sempre primer l'endoll a l'aparell i després el cable a la presa de corrent. Per desconnectar-lo, gireu qualsevol control a la posició "off" i, a continuació, retireu l'endoll de la presa de corrent.
- Aquest aparell només és per a ús domèstic.
- Before plugging in, set it upright for at least 2 hours to allow the refrigerant fluid to settle.
- Ensure the sugar content of all liquid added exceeds 5%. Sugar substitutes are not applicable for proper slush formation.
- For alcoholic beverages, ensure alcohol content ranges between 2.8% and 16%.
- Stir the mixture thoroughly before pouring it into the jar.
Configuració
- Desembaleu tots els components i traieu qualsevol material d'embalatge.
- Place the slushie machine on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
- Before first use, clean the removable barrel and parts according to the "Cleaning and Maintenance" section.
- Allow the unit to stand upright for at least 2 hours before plugging it in. This allows the refrigerant fluid to settle, ensuring optimal performance.
- Connecteu el cable d'alimentació a una presa de corrent adequada.
Instruccions de funcionament
The INOVIVA Slushie Machine S1.0 features a "No Ice Needed" design and one-touch operation for convenience.
- Prepare Your Mixture: Ensure your liquid mixture has a sugar content exceeding 5%. For alcoholic drinks, the alcohol content should be between 2.8% and 16%. Stir the mixture thoroughly before adding it to the machine.
- Fill the Barrel: Pour the prepared liquid into the transparent barrel. The maximum recommended fill level is 48oz, though the actual barrel capacity is 68oz.
- Seleccioneu el programa: Use the control panel to select one of the five preset programs. The 360° rotating mixing blades will ensure even freezing.
- Adjust Thickness (Optional): For best results, especially initially, set the thickness to a maximum level of 5 until the slush is distributed. If the desired thickness is not achieved, try other preset modes.
- Wait for Slushie: The machine will typically produce frozen drinks in 15-60 minutes, depending on the program and initial liquid temperature. Chilled drinks can speed up the process.
- Dispensar: Once the slushie is ready, use the ergonomically crafted handle to dispense your drink into a glass.
Neteja i Manteniment
Regular cleaning ensures the longevity and hygiene of your INOVIVA Slushie Machine.
Mode d'auto-neteja
The machine features a convenient self-cleaning mode for daily maintenance. Refer to the control panel for initiating this cycle.
Neteja profunda
- Desendolleu l'aparell de la presa de corrent.
- Unlock the rear handle and carefully remove the transparent barrel.
- Disassemble the internal parts, including the mixing blades and dispenser components.
- Rinse all removable parts with water. Most removable parts are dishwasher safe for added convenience.
- Netegeu la unitat principal amb un anunciamp tela. No submergiu la unitat principal a l'aigua.
- Ensure all parts are completely dry before reassembling and storing the machine.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Liquid not freezing or not forming slush. | Insufficient sugar content; liquid too warm; incorrect program selected; refrigerant fluid not settled. | Ensure sugar content is >5%. Use chilled liquids. Try a different preset mode or adjust thickness. Allow unit to stand upright for 2 hours before first use or after moving. |
| La màquina no s'encén. | No connectat; apagadatage; mal funcionament de la unitat. | Check power connection. Verify power outlet is functional. Contact customer support if problem persists. |
| Slushie is too thin or too thick. | Incorrect thickness setting; liquid composition. | Adjust the thickness setting using the control panel. Ensure proper sugar/alcohol content. |
| Sorolls inusuals durant el funcionament. | Normal operation sounds; foreign object in barrel; internal issue. | Some operational noise is normal. Check for any obstructions in the barrel. If noise is excessive or unusual, discontinue use and contact support. |
Note: If you encounter any issues not listed here or if troubleshooting steps do not resolve the problem, please contact INOVIVA customer support for assistance.
Especificacions
- Model: S1.0
- Capacitat: 68 oz (actual barrel capacity), 48 oz (maximum recommended fill)
- Dimensions (paquet): 20.3 x 19.5 x 10.8 polzades
- Pes de l'article: 27.3 lliures
- Característiques: No Ice Needed, 5 Preset Programs, Self-Cleaning Function, 360° Rotating Mixing Blades, Ergonomic Handle, Removable Drip Tray.
Suport
For any questions, concerns, or technical assistance regarding your INOVIVA Slushie Machine S1.0, please reach out to our customer support team. We are committed to providing prompt and satisfactory solutions.
Please refer to the product packaging or the official INOVIVA weblloc per obtenir informació de contacte.
Fabricant: inoviva
Número de model: S1.0
ASIN: B0DGKK97G7
