Nilight 3 Gang Rocker Switch Box with PD Type C & QC 3.0 USB Charger and Voltmeter (Model 90443R) User Manual

1. Introducció

This manual provides comprehensive instructions for the Nilight 3 Gang Rocker Switch Box, Model 90443R. This multi-functional panel is designed for various 12V-24V DC vehicles and vessels, including cars, UTVs/ATVs, trucks, trailers, RVs, caravans, buses, marine boats, and yachts. It integrates three 20-amp rocker switches, a PD Type C and QC 3.0 dual USB charger, and an LED voltmeter for convenient power management and device charging.

2. Característiques clau

• Disseny multifuncional: Features three 20-amp rocker switches (12VDC), a QC3.0 dual USB charger, and an LED voltmeter.
• Construcció impermeable: The switch box is waterproof, weatherproof, and splash-proof, made from quality aluminum to protect components from short circuits and damage.
• PD Type C & QC 3.0 USB Charger: Enables simultaneous fast charging of two devices, up to 40% faster than conventional chargers.
• Integrated Voltmeter: Clearly displays current working voltage, allowing easy monitoring of vehicle battery conditions.
• Surface Mount Enclosure: Designed for flexible installation on dashboards, under dashboards, or middle consoles, with a 360-degree adjustable bracket.
• Aplicació àmplia: Controls up to 3 different devices such as LED light bars, rear lights, rock lights, and other accessories.
• Adhesius de bricolatge: Includes transparent and night glow stickers for customizing switch labels according to user preference.

3. Configuració i instal·lació

The Nilight 3 Gang Rocker Switch Box comes pre-wired for simplified installation. The aluminum box and adjustable bracket allow for versatile mounting options.

3.1 Muntatge

The switch box features a surface mount enclosure and a bracket that can be adjusted 360 degrees. This flexibility allows installation on various surfaces such as the dashboard, under the dashboard, or in the middle console of your vehicle or vessel.

3.2 Cablejat

The unit is pre-wired for ease of installation. Connect the main power and ground wires, then connect the individual output wires from each switch to your desired accessories or relays.

• Battery Positive (+): Connect the red wire to the positive terminal of your 12V-24V DC power source or an ACC (Accessory) power source.
• Battery Negative (-): Connect the black wire to the negative terminal of your power source.
• Accessory Wires: Connect the individual white wires from each switch to the positive input of your accessories (e.g., LED light bars, pumps).

3.3 Customization with DIY Stickers

The package includes transparent and night glow stickers with various patterns. These can be applied to the rocker switches to label their functions, enhancing usability, especially in low-light conditions.

4. Instruccions de funcionament

4.1 Rocker Switches

Each of the three SPST ON/OFF rocker switches controls a connected device. Simply press the switch to the ON position to activate the device and to the OFF position to deactivate it. The switches are illuminated to indicate their status.

4.2 ports de càrrega USB

The integrated PD Type C and QC 3.0 USB charger allows you to charge compatible devices. Connect your device's USB cable to the appropriate port. The charger supports dual outputs (5V/2.1A, 5V/1A) for simultaneous charging.

4.3 Voltímetre

The LED voltmeter displays the current voltage of your vehicle's electrical system. This allows you to monitor the battery condition. Refer to the table below for typical voltagrangs e:

5. Manteniment

The Nilight 3 Gang Rocker Switch Box is designed with a weatherproof and splash-proof aluminum housing. While it offers protection against the elements, it is not suggested to submerge the unit in water.

• Inspeccioneu regularment totes les connexions del cablejat per assegurar-vos que estiguin ben fixades i que no presentin corrosió.
• Keep the surface of the switch box clean from dirt and debris. Use a soft, damp drap per netejar.
• Ensure the rubber caps for the USB ports are properly sealed when not in use to prevent moisture ingress.

6. Solució De Problemes

• No Power to Switches/Charger:
  - Check the main power connection to the battery. Ensure the red wire is securely connected to positive and the black wire to negative.
  - Verify that the vehicle's battery has sufficient charge by checking the voltmeter reading.
• Device Not Activating:
  - Confirm the individual accessory's wiring is correctly connected to the switch's output wire.
  - Ensure the accessory itself is functioning correctly.
• USB Charger Not Working:
  - Check if the device being charged is compatible with PD Type C or QC 3.0 standards.
  - Ensure the USB cable is not damaged and is properly inserted.
• Voltmeter Reading Incorrect:
  - Verify all power connections to the switch box are stable.
  - If the issue persists, consult a professional electrician.

7. Especificacions

8. Informació de la garantia

Nilight products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Nilight weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.

9. Atenció al client

For technical assistance, troubleshooting, or product inquiries, please contact Nilight customer support. Contact information can typically be found on the product packaging or the official Nilight weblloc.