VIVIJASON 35.4" Square Patio Height Bar Table Instruction Manual

Introducció

This manual provides detailed instructions for the assembly, operation, maintenance, and care of your VIVIJASON 35.4" Square Patio Height Bar Table. Please read all instructions carefully before assembly and use to ensure safe and proper functionality of the product. Retain this manual for future reference.

Image: The VIVIJASON 35.4-inch Square Patio Height Bar Table in Antique Bronze finish.

Informació de seguretat

• Assegureu-vos que totes les peces estiguin presents i no estiguin danyades abans del muntatge. No utilitzeu el producte si hi falta alguna peça o si està trencada.
• Munta la taula sobre una superfície suau i neta per evitar ratllades.
• Do not overtighten screws during initial assembly. Tighten all fasteners securely only after all components are aligned.
• No supereu la capacitat màxima de pes de 165 lliures.
• Mantingueu els nens i les mascotes allunyats de la zona de reunió.
• Periodically check all bolts and nuts to ensure they remain tight.
• Use caution when moving the table to prevent injury or damage.

Contingut del paquet

Verifiqueu que tots els components que s'enumeren a continuació s'inclouen al paquet. Si falta alguna peça o hi ha alguna peça danyada, poseu-vos en contacte amb el servei d'atenció al client.

• Taula (1)
• Cames (4)
• Support Brackets (4)
• Adjustable Footpads (4)
• Paquet de ferramenta (cargols, volanderes, clau Allen)
• Manual d'instruccions (1)

Image: Illustration of the table components and included hardware for assembly.

Instruccions de muntatge

Follow these steps to assemble your VIVIJASON Patio Height Bar Table:

1. Desempaquetar components: Carefully remove all parts from the packaging and lay them out on a soft, flat surface to prevent scratching.
2. Fixar les potes a la taula: Align each leg with the designated mounting points on the underside of the tabletop. Insert the bolts through the holes, but do not tighten them completely at this stage.
3. Instal·leu els suports de suport: Connect the support brackets between the legs. Ensure proper alignment before inserting bolts. Again, do not fully tighten the bolts yet.
4. Adjust Footpads: Screw the adjustable footpads into the bottom of each leg. These can be adjusted later to level the table on uneven surfaces.
5. Ajustament final: Once all components are loosely assembled and aligned, gradually tighten all bolts using the provided Allen wrench. Ensure the table is stable and level before fully tightening.

Image: A visual reminder to loosely assemble all parts before final tightening.

Instruccions d'ús

Your VIVIJASON Patio Height Bar Table is designed for outdoor use and offers practical features:

• Col·locació: Position the table on a stable, level surface in your desired outdoor area such as a patio, balcony, lawn, or garden.
• Forat del paraigua: The table features a 2.2-inch diameter umbrella hole in the center of the tabletop. This allows for the insertion of a standard patio umbrella (not included) to provide shade and comfort during outdoor activities.
• Nivell: Use the adjustable footpads on each leg to fine-tune the table's stability and ensure it sits level on uneven ground. Rotate the footpads clockwise or counter-clockwise to raise or lower each corner as needed.

Image: The bar table shown with a patio umbrella inserted into the central hole, demonstrating its functionality.

Imatge: Primer pla view of an adjustable footpad on a table leg, illustrating how it can be rotated to fit uneven ground.

Manteniment i cura

To ensure the longevity and appearance of your VIVIJASON Patio Height Bar Table, follow these maintenance guidelines:

• Neteja: The cast aluminum construction allows for easy cleaning. Simply hose down the table with water to remove dirt and debris. For stubborn stains, use a mild soap solution and a soft brush, then rinse thoroughly.
• Assecat: After cleaning, wipe the table dry with a soft cloth to prevent water spots, especially in areas with hard water.
• Resistència a l'òxid: The table features a powder-coated finish for rust resistance. While designed for all-weather use, storing the table indoors or covering it during harsh weather conditions (e.g., heavy snow, prolonged rain) can further extend its lifespan.
• Inspecció: Periodically inspect the table for any signs of wear, loose bolts, or damage. Address any issues promptly to maintain structural integrity.

Resolució de problemes

If you encounter any issues with your VIVIJASON Patio Height Bar Table, refer to the following common solutions:

• La taula tremola: If the table is unstable or wobbles, check that all bolts are securely tightened. Adjust the individual footpads on each leg to compensate for uneven ground until the table is stable.
• Dificultat durant el muntatge: If you experience difficulty aligning bolt holes during assembly, ensure that no bolts have been fully tightened prematurely. Loosen all bolts slightly, adjust the components for proper alignment, and then gradually tighten all fasteners.
• Scratches or Finish Damage: Minor scratches can sometimes be touched up with outdoor-grade paint matching the antique bronze finish. For significant damage, contact customer support.

Especificacions

Image: Detailed diagram showing the dimensions and key features of the bar table.

Informació de la garantia

Specific warranty details for the VIVIJASON 35.4" Square Patio Height Bar Table are not provided in the product information. Please refer to the seller's or manufacturer's official website, or contact customer support for current warranty terms and conditions.

Atenció al client

For any questions, concerns, or assistance with your VIVIJASON product, please contact the seller directly through the platform where the purchase was made. You may also visit the official VIVIJASON brand store for additional information and contact options:

Visit the VIVIJASON Store on Amazon