Manual d'instruccions de l'altaveu de peu KEF Q7 Meta

1. About Your KEF Q7 Meta Speaker

The KEF Q7 Meta is a high-fidelity floorstanding speaker engineered to deliver impactful bass and exceptional sonic clarity. It incorporates KEF's advanced 12th generation Uni-Q® driver array with Metamaterial Absorption Technology (MAT™) for detailed and lifelike sound reproduction. Complementing this, two 6.5-inch hybrid aluminum bass drivers provide a deep and immersive audio experience suitable for both music and movies.

Figure 1: KEF Q7 Meta Floorstanding Speaker (Black)

Característiques principals:

• Metamaterial Absorption Technology (MAT™): Absorbs 99% of unwanted sound from the rear of the driver, significantly reducing distortion for purer, more natural sound.
• 12th Generation Uni-Q® Driver Array: Acts as a single point source to disperse sound evenly, creating an immersive and cohesive soundstage with enhanced clarity.
• Refined Crossover: Ensures seamless integration between all speaker components, optimized for precise signal path and superior performance.
• Hybrid Bass Driver Design: Provides stiffness for piston-like movement, delivering powerful and agile bass response even at high output levels.
• Disseny minimalista contemporani: Features a satin finish in various colors (Black, White, Walnut) to blend effortlessly into any interior.

Figure 2: Close-up of the Metamaterial Absorption Technology (MAT) structure, designed to absorb unwanted sound.

Figura 3: Explotat view illustrating the components of the KEF Uni-Q Driver Array, showcasing el seu disseny integrat.

Figure 4: A speaker crossover board, a critical component for directing audio frequencies to the appropriate drivers.

Figure 5: Diagram illustrating the construction of a hybrid bass driver, designed for powerful and precise low-frequency reproduction.

2. Contingut del paquet

Upon unpacking your KEF Q7 Meta Floorstanding Speaker, please ensure all items are present:

• KEF Q7 Meta Floorstanding Speaker (1 unit)
• Targeta de garantia

3. Configuració

3.1 Col·locació dels altaveus

La col·locació òptima dels altaveus és crucial per aconseguir la millor qualitat de so. Tingueu en compte les pautes següents:

• Acústica de l'habitació: Place speakers in a room with balanced acoustics, avoiding excessive reflections or absorption.
• Distància des de Walls: Experiment with the distance from the rear and side walls to control bass response and imaging. Generally, a distance of 1-3 feet from walls is a good starting point.
• Stereo Triangle: For a stereo setup, position the speakers and your primary listening position to form an equilateral triangle.
• Cap endins: Slightly angle the speakers inward towards the listening position (toe-in) to optimize the soundstage i imatges.

Figura 6: Frontal view of the KEF Q7 Meta Floorstanding Speaker, illustrating its full height and driver arrangement.

3.2 Connexions

Connect your KEF Q7 Meta speakers to your amplifier or receiver using high-quality speaker wire. Ensure correct polarity (positive to positive, negative to negative) for optimal performance.

1. Apagueu el vostre ampl'amplificador/receptor abans de fer cap connexió.
2. Strip approximately 1/2 inch (12mm) of insulation from the ends of your speaker wires.
3. Unscrew the binding posts on the back of the speaker and your amplificador/receptor.
4. Insert the bare wire into the hole in the binding post, ensuring no stray strands touch other terminals.
5. Tighten the binding posts securely.
6. Repeat for all speakers, maintaining correct polarity.

Figura 7: posterior view of the KEF Q7 Meta speaker, highlighting the speaker wire connection terminals.

4. Funcionament de l'altaveu

Once connected, ensure your amplifier/receiver is powered on and set to the correct input source. Adjust the volume to your preferred listening level. The KEF Q7 Meta speakers are designed to deliver a wide and accurate soundstage, allowing for an immersive listening experience.

5. Manteniment

To maintain the aesthetic and acoustic performance of your KEF Q7 Meta speakers, follow these simple maintenance tips:

• Neteja: Use a soft, dry, lint-free cloth to gently wipe the cabinet surfaces. Avoid abrasive cleaners or solvents.
• Pols: Regularly dust the speaker grilles (if installed) and drivers with a soft brush or vacuum cleaner with a brush attachment.
• Eviteu la llum solar directa/calor: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can damage the finish and internal components.

6. Solució De Problemes

If you encounter any issues with your KEF Q7 Meta speakers, refer to the following common troubleshooting steps:

• Sense so: Check all cable connections between the speakers and your amplifier/receiver. Ensure the amplifier is powered on and set to the correct input. Verify speaker wire polarity.
• So distorsionat: Baixeu el volum del vostre amplifier/receiver. Check for loose connections or damaged speaker wires. Ensure your ampEl lifier no està sobrecarregat.
• So desigual: Verify speaker placement and ensure they are equidistant from the listening position. Check balance settings on your amplificador/receptor.

If problems persist, consult the KEF customer support or a qualified audio technician.

7. Especificacions

8. Garantia i Suport

Your KEF Q7 Meta Floorstanding Speaker comes with a Limited Warranty. Please refer to the included Warranty Card for detailed terms and conditions regarding coverage and duration.

For technical assistance, product inquiries, or warranty claims, please contact KEF customer support through their official weblloc web o la informació de contacte que apareix a la targeta de garantia.