1. Introducció
The HYNOTONE ARES Distortion Preamp Pedal is designed to deliver aggressive, high-gain tones, mimicking the characteristics of a tube amplifier. Featuring a 5-stage JFET circuit, a versatile 3-band EQ, and specialized tone-shaping switches, this pedal is optimized for heavy music genres, extended-range guitars, and drop tunings. This manual provides detailed instructions for the proper setup, operation, and maintenance of your ARES pedal.
2. Instruccions de seguretat
- No exposeu la unitat a la pluja, la humitat o les temperatures extremes.
- Use only a regulated 9V DC power supply with a center-negative polarity. Incorrect power supplies can damage the unit and void the warranty.
- Eviteu col·locar la unitat a prop de fonts de calor o sota la llum solar directa.
- No intenteu obrir ni fer el manteniment de la unitat vosaltres mateixos. Encarregueu totes les tasques de manteniment a personal qualificat.
- Mantenir fora de l'abast dels nens.
3. Contingut del paquet
Si us plau, assegureu-vos que tots els elements estiguin presents al paquet:
- HYNOTONE ARES Distortion Preamp Pedal
- Manual d'usuari (aquest document)
- Targeta de garantia (si escau)
4. Producte acabatview
The HYNOTONE ARES pedal features a robust metal enclosure and intuitive controls for shaping your tone.
Figura 4.1: Davant view of the HYNOTONE ARES pedal with all controls labeled, including Bass, Mid, Treble, Volume, Gain knobs, and Bite, Tight, Boost switches.
4.1. Controls i característiques
- Pom BASS: Ajusta la resposta de baixa freqüència.
- Maneta MID: Ajusta la resposta de freqüència mitjana.
- Controlador TREBLE: Ajusta la resposta d'alta freqüència.
- Botó de VOLUM: Controla el nivell de sortida general del pedal.
- Mando GAIN: Ajusta la quantitat de distorsió.
- Interruptor BITE: Engages a mid-range grit, emphasizing a rawer, more aggressive distortion texture. When disengaged, the tone becomes smoother.
- TIGHT Switch: Refines the low-end for a punchy, focused sound, making the tone more aggressive. Recommended for use with 7-string guitars and drop tunings.
- Interruptor BOOST: Tightens the low end and boosts mids, providing an aggressive and modern tone. Recommended for use with 7-string guitars and drop tunings.
- Interruptor de peu: Activa o evita l'efecte.
Figura 4.2: Un intern view of the pedal's circuit board, highlighting the JFET components. The 5-stage JFET circuit is designed to emulate the sound and feel of a real tube preamp.
5. Configuració
Follow these steps to connect your HYNOTONE ARES pedal:
- Connexió d'alimentació: Connect a 9V DC center-negative power supply (not included) to the DC input jack on the pedal.
- Connexió d'entrada: Connect your guitar or the output of another pedal to the INPUT jack on the ARES pedal using a standard 1/4-inch instrument cable.
- Connexió de sortida: Connect the OUTPUT jack of the ARES pedal to your amplifier's input or the input of another pedal in your signal chain using a standard 1/4-inch instrument cable. For optimal results, especially when using the ARES as a preamp, connect it to your amplifier's effects return or a dedicated power amp.
Figura 5.1: The HYNOTONE ARES pedal connected in a typical setup, showing input and output cables, ready for use with an electric guitar.
6. Instruccions de funcionament
Once connected, you can begin shaping your tone using the pedal's controls.
6.1. Funcionament bàsic
- Press the footswitch to engage (LED on) or bypass (LED off) the distortion effect.
- Start with all knobs at the 12 o'clock position for a neutral starting point.
- Ajusteu el GUANYA knob to achieve your desired level of distortion. Higher settings will produce more aggressive tones.
- Utilitza el VOLUM knob to match the output level of the pedal to your bypassed signal or to boost your signal for solos.
6.2. Tone Shaping with EQ and Switches
The 3-band EQ and specialized switches provide extensive control over your sound:
Figura 6.1: The HYNOTONE ARES pedal highlighting the Bass, Mid, and Treble EQ controls, which function similarly to a tube amplifier's tone stack.
- BASS, MID, TREBLE Knobs: Adjust these controls to sculpt your frequency response. These act like a traditional tube amp's tone stack, allowing for significant tonal variations.
- Interruptor BITE: Engage this switch for a pronounced mid-range character, adding a raw, gritty texture suitable for cutting through a mix. Disengage for a smoother, less aggressive mid-response.
- TIGHT Switch: Activate this switch to tighten the low-end frequencies, resulting in a more focused and articulate sound. This is particularly effective for palm-muted riffs and maintaining clarity in low tunings.
- Interruptor BOOST: This switch simultaneously tightens the low end and boosts the mid-range, creating a modern, aggressive tone ideal for heavy riffs and solos, especially with extended-range guitars.
Figura 6.2: Primer pla view of the HYNOTONE ARES pedal, detailing the BITE, TIGHT, and BOOST switches and their functions for advanced tone shaping.
7. Manteniment
To ensure the longevity and optimal performance of your ARES pedal:
- Neteja: Feu servir un drap suau i sec per netejar l'exterior del pedal. No utilitzeu productes de neteja abrasius ni dissolvents.
- Emmagatzematge: Guardeu el pedal en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes quan no l'utilitzeu.
- Connexions: Periodically check all cable connections for wear and tear. Replace damaged cables to prevent signal loss or noise.
8. Solució De Problemes
If you encounter issues with your ARES pedal, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| No fa so quan s'acciona el pedal. | Incorrect power supply, faulty cables, pedal not connected correctly. | Verify power supply (9V DC, center-negative). Check all instrument cables. Ensure input/output connections are correct. |
| Weak or distorted sound (unintended). | Low battery (if using battery power), incorrect gain/volume settings, faulty cables. | Ensure adequate power. Adjust GAIN and VOLUME knobs. Test with different cables. |
| Excessive noise or hum. | Bucle de terra, interferències d'altres dispositius electrònics, font d'alimentació defectuosa. | Use a high-quality, isolated power supply. Move pedal away from other electronic devices. Check for proper grounding in your setup. |
| Footswitch not responding. | Problema d'alimentació, fallada interna. | Ensure pedal is powered on. If problem persists, contact customer support. |
If the issue persists after attempting these solutions, please contact customer support for further assistance.
9. Especificacions
Technical specifications for the HYNOTONE ARES Distortion Preamp Pedal:
Figura 9.1: A visual representation of the HYNOTONE ARES pedal's key technical specifications, including dimensions, weight, and electrical characteristics.
| Especificació | Valor |
|---|---|
| Número de model | ares01 |
| Dimensions (L x A x A) | 2.6 x 2.4 x 4.9 polzades (65 x 60 x 125 mm) |
| Pes de l'article | 11.2 unces (315 g) |
| Impedància d'entrada | 1 MOhm |
| Impedància de sortida | 1 kOhm |
| Entrada de potència | Center-negative 9V nominal DC, 7-12V range |
| Sorteig actual | 10mA typical, 100mA max |
| Tipus de connector | Presa d'àudio de 1/4 de polzada |
| Interfície del maquinari | Àudio d'1/4 de polzada |
| Format del senyal | Analògic |
| Efectes de sortida d'àudio | Distortion, Preamp |
| Tipus de controls | Knob, Toggle Switches |
10. Garantia i Suport
10.1. Informació de la garantia
This product is covered by a limited warranty against defects in materials and workmanship. The duration and terms of the warranty may vary by region. Please refer to the warranty card included with your product or visit the official TOPPING weblloc per obtenir informació detallada sobre la garantia.
10.2. Atenció al client
For technical assistance, troubleshooting, or service inquiries, please contact TOPPING customer support through their official website or the retailer from whom you purchased the product. Please have your model number (ares01) and purchase date available when contacting support.
