RAB Lighting SR8 8 ft. LED Strip Fixture Instruction Manual

1. Producte acabatview

The RAB SR8 is an 8-foot LED strip fixture designed for commercial lighting applications. This fixture features field-adjustable power settings (40W, 50W, 60W) and color temperatures (3500K, 4000K, 5000K), providing flexibility to suit various lighting needs. It is 0-10V dimmable and compatible with 120-277V electrical systems, offering efficient and versatile illumination.

Figura 1.1: Acabatview of the RAB SR8 8 ft. LED Strip Fixture. This image displays the full length of the white LED strip fixture, highlighting its sleek and linear design suitable for surface mounting in commercial environments.

2. Informació de seguretat

• ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
• La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics nacionals i locals.
• Assegureu-vos el subministrament voltage is correct for the fixture (120-277V).
• Do not handle energized fixture with wet hands.
• No instal·leu a prop de materials combustibles.
• Aquest aparell està pensat només per a ús en interiors.

3. Configuració i instal·lació

3.1. Preinstal·lació

• Unpack the fixture and inspect for any damage.
• Ensure all necessary components are present (LED Fixture).
• Desconnecteu l'alimentació a l'interruptor automàtic abans de començar la instal·lació.

3.2. Muntatge del dispositiu

The SR8 fixture is designed for surface mounting. Refer to the dimensional drawing for precise measurements and mounting hole locations.

Figura 3.1: Dimensional drawing of the RAB SR8 fixture. This diagram illustrates the length (94.49 inches), width (2.36 inches), and height (2.79 inches) of the fixture, along with potential mounting points.

1. Mark the desired mounting locations on the ceiling or wall, ensuring they align with the fixture's mounting points.
2. Drill appropriate holes for mounting screws (not included).
3. Secure the fixture to the mounting surface using suitable hardware.

3.3. Cablejat elèctric

Connect the fixture to the electrical supply according to the wiring diagram below. Ensure all connections are secure and comply with local electrical codes.

Figura 3.2: Wiring diagram for the RAB SR8 LED Strip Fixture. This diagram shows the connections for Line (Black), Common (White), (+) DIMV (Purple), (-) DIMV (Pink), Vaux 12V (Red), and Ground (Ground) to the light fixture.

• Connect the black wire from the fixture to the LINE (hot) wire from the supply.
• Connect the white wire from the fixture to the COMMON (neutral) wire from the supply.
• Connect the green or bare copper wire from the fixture to the GROUND wire from the supply.
• For 0-10V dimming, connect the purple wire to (+) DIMV and the pink wire to (-) DIMV from the dimming control. If dimming is not used, cap these wires individually.
• Ensure all wire nuts or connectors are tightened securely.

4. Instruccions de funcionament

The RAB SR8 fixture allows for field adjustment of both power output and color temperature to customize lighting performance.

Figura 4.1: Primer pla view of the power (W) and color temperature (CCT) adjustment switches on the RAB SR8 fixture. This image shows the physical switches used to select desired wattage and Kelvin temperature settings.

4.1. Power Adjustment (Wattage)

The fixture includes a switch to select the desired wattage output. This allows for optimization of brightness and energy consumption.

• Locate the "Power (W)" switch on the fixture.
• Seleccioneu una de les opcions següents: 40W, 50W, o 60W.
• Ensure power is disconnected before adjusting this switch.

4.2. Color Temperature Adjustment (CCT)

The fixture also features a switch to select the desired color temperature, allowing you to choose between different light appearances.

• Locate the "Color Temperature (CCT)" switch on the fixture.
• Seleccioneu una de les opcions següents: 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
• Ensure power is disconnected before adjusting this switch.

4.3. Funcionalitat regulable

The SR8 fixture supports 0-10V dimming. When connected to a compatible 0-10V dimmer, the light intensity can be adjusted from 100% down to 10% (or lower, depending on dimmer specifications).

• Ensure the fixture is correctly wired for 0-10V dimming as per Section 3.3.
• Use a compatible 0-10V dimmer switch (sold separately) to control the light output.

5. Manteniment

The RAB SR8 LED Strip Fixture requires minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau, sec o lleugerament sec.amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents.
• LED: La font de llum LED integrada està dissenyada per a una llarga vida útil i no requereix substitució.

6. Solució De Problemes

If the fixture is not operating as expected, refer to the following common issues and solutions:

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support.

7. Especificacions

8. Informació de la garantia

The RAB SR8 LED Strip Fixture comes with a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official RAB Lighting weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.

9. Atenció al client

For technical assistance, replacement parts, or any questions not covered in this manual, please contact RAB Lighting customer support:

• Weblloc: www.rablighting.com
• Consulteu el website for current contact information, including phone numbers and email support.