Producte acabatview
The Xiaomi Smart Dehumidifier Lite is designed to efficiently remove excess moisture from your indoor environment, preventing mold growth, refreshing fabrics, and improving air quality. Its compact design and quiet operation make it suitable for various home and commercial settings.

Figura 1: Frontal view of the dehumidifier, showcasing el seu disseny elegant i minimalista.

Figure 2: Top control panel with digital display and intuitive touch controls.
Instruccions de seguretat
- Col·loqueu sempre el deshumidificador sobre una superfície estable i plana.
- Assegureu-vos que hi hagi prou espai lliure al voltant de la unitat per a un flux d'aire adequat (almenys 20 cm de les parets o els mobles).
- No bloquegeu les entrades o sortides d'aire.
- Do not operate the unit near water or in excessively wet environments (e.g., directly in a shower).
- Desendolleu la unitat abans de netejar-la o realitzar qualsevol manteniment.
- Mantenir fora de l'abast dels nens i mascotes.
- Utilitzeu només la font d'alimentació especificada.
Configuració
Desembalatge
Traieu amb cura el deshumidificador del seu embalatge. Conserveu els materials d'embalatge per a futurs emmagatzematges o transports.
Col·locació
Place the unit in the desired location, ensuring it is on a firm, level surface. Maintain at least 20 cm of space around all sides for optimal air circulation.
Connexió d'alimentació
Connecteu el cable d'alimentació a una presa de corrent amb connexió a terra. Assegureu-vos que el volumtage matches the specifications listed on the product label.
Water Tank Installation (Initial Check)
Ensure the 3-liter water tank is correctly seated in its compartment. The unit will not operate if the tank is full or improperly installed.
Continuous Drainage Setup (Optional)
For continuous operation without manual tank emptying, connect the provided 1-meter drain hose to the drainage port at the back of the unit. Route the hose to a suitable floor drain or larger container, ensuring a downward slope for gravity drainage.

Figura 3: posterior view of the dehumidifier, indicating the location of the air intake and water tank access.
Instruccions de funcionament
Tauler de control acabatview
The control panel is located on the top of the unit (refer to Figure 2). It features a digital display and several touch-sensitive buttons:
- Botó d'encesa: Encén/apaga la unitat.
- Botó de mode: Cycles through available operating modes (Smart, Clothes Drying, Sleep).
- Botó de configuració d'humitat: Ajusta el nivell d'humitat objectiu.
- Botó del temporitzador: Configura el temporitzador de funcionament.
- Visualització: Shows current humidity, target humidity, and mode indicators.
Modes de funcionament
- Mode intel·ligent: Automatically adjusts dehumidification based on the ambient humidity to maintain a comfortable and healthy environment.
- Mode d'assecat de roba: Provides continuous and powerful dehumidification with 360° ventilation to assist in drying laundry indoors.
- Mode de repòs: Operates at the lowest fan speed and noise level (34 dB(A)) for quiet operation during rest periods. The display lights may dim or turn off.
Smart Connectivity (Mi Home/Home App)
The Xiaomi Smart Dehumidifier Lite can be controlled remotely via the Mi Home/Home App. Follow the app's instructions to pair your device. This allows for remote control, scheduling, and monitoring of humidity levels.
Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil del deshumidificador.
Neteja del dipòsit d'aigua
- When the water tank is full, the unit will automatically stop operating and an indicator will light up.
- Carefully remove the water tank from the unit.
- Buidar l'aigua recollida.
- Rinse the tank with clean water. For stubborn residue, use a mild detergent and rinse thoroughly.
- Reinsert the clean water tank firmly into the unit.
Cleaning the Antibacterial Filter
The dehumidifier features an ultra-thin washable antibacterial filter. It is recommended to clean the filter every two weeks or as needed, depending on usage and air quality.
- Desendolleu el deshumidificador de la presa de corrent.
- Locate the filter access panel (refer to Figure 3 for general location).
- Traieu el filtre.
- Gently clean the filter using a soft brush or vacuum cleaner to remove dust and debris.
- If heavily soiled, rinse the filter under cool running water. Do not use hot water or harsh detergents.
- Allow the filter to air dry completely before reinserting it into the unit. Do not expose to direct sunlight or heat.
- Reinstall the dry filter and close the access panel.
Neteja exterior
Netegeu l'exterior de la unitat amb un damp cloth. Do not use abrasive cleaners, solvents, or spray directly onto the unit.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no s'encén. |
|
|
| El deshumidificador no recull aigua. |
|
|
| La unitat fa soroll. |
|
|
Especificacions
| Marca | Xiaomi |
| Número de model | BHR8374EU |
| Capacitat de deshumidificació | Fins a 13 litres/dia |
| Volum del dipòsit d'aigua | 3 litres |
| Nivell de soroll | Tan baix com 34 dB(A) |
| Color | Blanc |
| Material | Plàstic |
| Característiques especials | Adjustable Humidity Control, Smart Connectivity (Mi Home/Home App), Washable Antibacterial Filter, Continuous Drainage Option |
| Aplicacions recomanades | Home, Commercial |
Garantia i Suport
Per obtenir informació sobre la garantia i assistència tècnica, consulteu la pàgina oficial de Xiaomi. website or contact Xiaomi customer service. Keep your purchase receipt as proof of purchase.
Podeu trobar més informació i recursos de suport a la pàgina oficial de Xiaomi. weblloc: www.mi.com





