1. Producte acabatview
This manual provides instructions for the Amico 2x4 LED Troffer Panel Light. This fixture is designed for drop ceilings and features adjustable color temperature (CCT) and wattage settings, along with 0-10V dimming capabilities. It is suitable for various indoor commercial and institutional applications.
Image 1.1: Four Amico 2x4 LED Troffer Panel Lights, illustrating the product's appearance.
2. Informació de seguretat
Si us plau, llegiu atentament totes les instruccions abans de la instal·lació i l'ús. Conserveu aquest manual per a futures consultes.
- Seguretat elèctrica: Installation should be performed by a qualified electrician in accordance with national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or maintenance.
- Posada a terra: The fixture must be properly grounded to prevent potential electrical shock.
- Voltage: Comproveu que el volum de subministramenttage is compatible with the fixture's operating voltage (10 Volts DC for control, consult product label for main power).
- Només per a ús interior: This product is designed for indoor use in dry locations. Do not expose to moisture or extreme temperatures.
- Manipulació: Handle the fixture with care to avoid damage to components.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Amico 2x4 LED Troffer Panel Light(s)
- Maquinari de muntatge
4. Instruccions d'instal·lació
The Amico 2x4 LED Troffer Panel Light is designed for easy installation in standard drop ceilings using its built-in clips and included mounting hardware.
4.1 Passos previs a la instal·lació
- Desconnexió d'alimentació: Desconnecteu l'alimentació a l'interruptor automàtic abans de començar qualsevol treball elèctric.
- Inspecció de fixacions: Unpack the fixture and inspect it for any damage. Do not install if damaged.
- Preparació de l'obertura del sostre: Ensure the ceiling grid opening is appropriate for a 2x4 (approximately 23.74" x 47.76") panel light.
4.2 Cablejat
- Connect the AC power supply wires to the fixture's input wires (Line, Neutral, Ground) according to local electrical codes.
- If using 0-10V dimming, connect the dimming wires (purple and gray) from the fixture to the compatible 0-10V dimmer switch. Ensure polarity is correct.
- Secure all wire connections with appropriate connectors.
4.3 Muntatge
- Carefully lift the LED panel into the ceiling grid opening.
- Engage the built-in clips on the sides of the fixture with the ceiling grid rails to secure the panel in place.
- For added security, use the provided mounting hardware to attach the fixture to the building structure, if required by local codes or desired.
Image 4.1: Product dimensions (47.76"L x 23.74"W x 1.91"H) for installation planning.
5. Instruccions de funcionament
The Amico LED Troffer Panel Light offers adjustable wattage and color temperature settings to customize your lighting environment.
5.1 Adjusting Wattage (Brightness)
The fixture features a toggle switch on the back to select the desired wattage, which directly affects the brightness (lumens). Choose from 25W, 30W, 35W, 40W, or 50W.
Image 5.1: Location of the 5-position power toggle switch for wattage ajust.
Image 5.2: Visual representation of brightness levels at 25W, 30W, 35W, 40W, and 50W.
5.2 Ajust de la temperatura de color (CCT)
A separate toggle switch on the back of the fixture allows you to select the desired color temperature: 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight White).
Image 5.3: Location of the 4-position CCT toggle switch for color temperature adjustment.
Imatge 5.4: Ex.amples of different color temperatures (3000K, 3500K, 4000K, 5000K) in various environments.
5.3 Regulació de 0-10V
The fixture supports 0-10V dimming, allowing for smooth brightness adjustment from 0% to 100% when connected to a compatible 0-10V dimmer switch.
Image 5.5: Illustration of 0-10V dimming capability in a conference room setting.
6. Manteniment
The Amico LED Troffer Panel Light requires minimal maintenance.
- Neteja: Assegureu-vos que l'alimentació estigui apagada abans de netejar-la. Netegeu l'aparell amb un drap suau, sec o lleugerament humit.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Sense peces reparables per l'usuari: The LED chips and driver are integrated and not user-serviceable. Attempting to open or modify the fixture will void the warranty.
- Vida útil: The fixture is designed for over 50,000 hours of continuous operation.
Image 6.1: Internal components of the LED Troffer Panel Light, highlighting its durable design.
7. Solució De Problemes
If you encounter issues with your Amico LED Troffer Panel Light, refer to the following common troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén | Sense font d'alimentació Cablejat incorrecte Interruptor/regulador d'intensitat defectuós | Comproveu l'interruptor i les connexions d'alimentació. Verifiqueu que les connexions del cablejat siguin segures i correctes. Test switch/dimmer or bypass temporarily. |
| La llum parpelleja | Connexió de cablejat solta Atenuador incompatible Voltage fluctuacions | Comproveu totes les connexions de cablejat. Ensure 0-10V dimmer is compatible. Consulteu un electricista per comprovar l'estabilitat del subministrament elèctric. |
| L'atenuació no funciona | Incorrect dimmer wiring Atenuador incompatible | Verify 0-10V dimming wire connections (purple/gray). Use a compatible 0-10V dimmer. |
| La llum és massa tènue/brillant | Wat incorrectetagConfiguració Configuració del dimmer | Ajusteu el wattage toggle switch on the fixture. Adjust the 0-10V dimmer to the desired level. |
Si aquests passos no resolen el problema, poseu-vos en contacte amb l'atenció al client.
8. Especificacions
| Característica | Especificació |
|---|---|
| Model | led troffer light |
| Dimensions (L x A x A) | 47.76" x 23.74" x 1.91" |
| Potència ajustabletage | 25 W / 30 W / 35 W / 40 W / 50 W |
| Brillantor | Fins a 7000 lúmens (a 50 W) |
| Temperatura de color (CCT) | 3000K / 3500K / 4000K / 5000K Selectable |
| Regulabilitat | 0-10V regulable |
| Voltage (Control) | 10 volts (CC) |
| Material | Alumini |
| Tipus d'acabat | Recobert de pols |
| Tipus de font de llum | LED |
| Vida útil | 50,000 hores |
| Certificacions | ETL, DLC |
| Tipus d'instal·lació | Ceiling Mount (Drop Ceiling) |
| Ús interior/exterior | Interior |
9. Garantia i assistència
The Amico 2x4 LED Troffer Panel Light comes with a limited warranty. For specific warranty terms and conditions, please refer to the product packaging or contact Amico customer service.
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Amico customer support through their official channels.
