Diymore Humidity and Temperature Controller Socket User Manual

1. Introducció

This manual provides comprehensive instructions for the Diymore Humidity and Temperature Controller Socket. This device is designed to precisely control humidity and temperature in various environments, such as incubators, terrariums, greenhouses, and storage areas. It features multiple operating modes, calibration functions, and an alarm system to maintain desired environmental conditions.

2. Informació de seguretat

Please read all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Ensure the power supply matches the device's specifications (230V, 16A, max 3680W).
• Do not immerse the device or sensor in water or expose it to excessive moisture.
• No desmunteu ni modifiqueu el dispositiu.
• Mantenir fora de l'abast dels nens.
• Unplug the device from the power outlet before cleaning or maintenance.
• Utilitzeu-ho només en ambients interiors secs.

3. Característiques del producte

The Diymore Controller Socket offers a range of features for precise environmental control:

• Quatre modes de funcionament: Humidification, Dehumidification, Heating, and Cooling.
• Wide Control Range: Humidity 20-95%RH; Temperature -10°C to 50°C (14°F to 122°F).
• Adjustable Start/Stop Values: Program connected devices to activate based on set humidity/temperature thresholds.
• Funció de calibració: Real-time adjustment for humidity (-10~10%RH) and temperature (-9.9~9.9°C).
• Funció d'alarma: Audible alarm when humidity or temperature exceeds set limits.
• Memòria de dades: Retains all settings after a power failure.
• Funció de restabliment: Allows restoration of factory settings.
• Button Tone Settings: Customize button feedback.
• Error Prompt Function: Provides indications for operational issues.
• °C/°F Switching: Easily switch between Celsius and Fahrenheit temperature units.

Figura 3.1: Acabatview of Diymore Controller Socket features, including humidity and temperature control, alarm functions, calibration, and memory.

4. Contingut del paquet

El paquet inclou els articles següents:

• 1 x Diymore Humidity and Temperature Controller Socket (230V)
• 1 x External Sensor Probe

5. Producte acabatview i Dimensions

Familiarize yourself with the device's components and dimensions.

Figura 5.1: Diymore Controller Socket with external sensor.

Figura 5.2: Product dimensions of the controller and sensor.

The main unit measures approximately 13.1 cm (5.11 in) in height, 6 cm (2.36 in) in width, and 3.2 cm (1.25 in) in depth. The sensor probe measures approximately 5.5 cm (2.16 in) in length and 2.3 cm (0.90 in) in width.

6. Configuració

1. Desembalar: Carefully remove the controller and sensor from the packaging.
2. Connecta el sensor: Ensure the external sensor probe is securely plugged into the designated port on the side of the controller.
3. Sensor de posició: Place the sensor in the area where you wish to monitor and control humidity and temperature. Ensure it is not directly exposed to water or extreme conditions that could damage it.
4. Connectar: Insert the controller's plug into a standard 230V power outlet. The display will illuminate.
5. Connecteu l'aparell: Plug your humidifier, dehumidifier, heater, or cooler into the socket on the front of the controller.

7. Instruccions de funcionament

The controller features four buttons: MODE, SET, UP/CLK, i ABAIX.

7.1. Switching Temperature Units (°C/°F)

Per canviar entre Celsius (°C) i Fahrenheit (°F):

• Manteniu premut el botó SET button for 3 seconds. The temperature unit on the display will change.

7.2. Selecció del mode de funcionament

The device supports four main operating modes: Humidification (HC mode), Dehumidification (HC mode), Heating (TC mode), and Cooling (TC mode). Press the MODE button repeatedly to cycle through these modes.

Figura 7.1: Examples of the four working modes and alarm settings.

7.3. Setting Humidity/Temperature Control Values

To set the desired start and stop values for humidity or temperature:

1. Premeu el botó MODE button to select either HC (Humidity Control) or TC (Temperature Control) mode.
2. Premeu el botó SET button once. The "Start Humidity" or "Start Temperature" value will begin to flash.
3. Utilitza el UP/CLK i ABAIX buttons to adjust the desired start value.
4. Premeu el botó SET button again. The "Stop Humidity" or "Stop Temperature" value will flash.
5. Utilitza el UP/CLK i ABAIX buttons to adjust the desired stop value.
6. Premeu el botó SET button a third time, or wait a few seconds, to save the settings and exit.

Nota: For humidification/heating, the start value should be lower than the stop value. For dehumidification/cooling, the start value should be higher than the stop value.

7.4. Setting Alarm Function

The device can trigger an alarm if humidity or temperature goes outside a set range.

1. Premeu el botó MODE button to select either HC Alarm (Humidity Alarm) or TC Alarm (Temperature Alarm) mode.
2. Premeu el botó SET button once. The alarm threshold value will flash.
3. Utilitza el UP/CLK i ABAIX buttons to adjust the desired alarm threshold.
4. Premeu el botó SET button again, or wait a few seconds, to save the setting and exit.

When the measured humidity/temperature exceeds the set alarm value, the hygrostat will emit an audible alarm sound.

7.5. Funció de calibratge

To calibrate the humidity or temperature readings:

• Manteniu premut el botó UP/CLK button. The calibration value will appear and flash.
• Utilitza el UP/CLK i ABAIX buttons to adjust the calibration offset.
  • Humidity correction range: -10%RH to 10%RH
  • Temperature correction range: -9.9°C to 9.9°C
• Manteniu premut el botó MODE button to save the calibration and exit.

7.6. Altres funcions

• Memòria de dades: The device automatically saves all setting parameters, which are retained even after a power failure.
• Funció de restabliment: To restore factory settings, refer to the specific instructions in the full manual (if available) or contact support.
• Button Tone Settings: The device allows for customization of button sounds. Refer to the full manual for detailed instructions.
• Turn Off Alarm Sound: Specific instructions for turning off the alarm sound are typically found in the full manual.

8. Aplicacions

The Diymore Controller Socket is versatile and suitable for various applications requiring precise humidity and temperature control:

• Incubadores
• Domestic Reptile Habitats
• Poultry Houses
• Mushroom Cultivation
• Glass Containers / Terrariums
• Hivernacles
• Humidifiers and Dehumidifiers
• Household and Industrial Environments
• Cellers
• Nevera
• Magatzems

Figura 8.1: Diverse applications of the Diymore Controller Socket.

9. Manteniment

• Neteja: Disconnect the device from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Cura del sensor: Keep the sensor clean and free from dust or debris. Avoid bending or damaging the sensor cable.
• Emmagatzematge: If storing the device for an extended period, unplug it and store it in a dry, cool place.

10. Solució De Problemes

If you encounter issues with your Diymore Controller Socket, refer to the following common problems and solutions:

11. Especificacions

12. Garantia i Suport

For warranty information or technical support, please refer to the documentation included with your purchase or contact Diymore customer service through their official website or the retailer where the product was purchased. Please have your model number (temperatuur vochtigheid) and purchase date available when contacting support.