Introducció
Thank you for choosing the EverBrite Rechargeable Underhood Work Light. This manual provides essential information for the safe and efficient use of your new work light. Please read it thoroughly before operation and retain it for future reference.
Image: The EverBrite Rechargeable Underhood Work Light, showing its flexible light strip and magnetic ends with adjustable straps.
Característiques del producte
- Tres modes d'il·luminació: High, Medium, and Low settings to adapt to various lighting requirements.
- Càrrega ràpida USB-C: Equipped with two USB-C charging ports and LED indicators (red for charging, green for full charge).
- Magnetic Base Design: Integrated magnets allow secure attachment to metal surfaces for hands-free operation.
- Adjustable Elastic Strap: Durable nylon strap designed to fit vehicle hoods from 52 to 75 inches wide, providing a secure and flexible fit.
- Dual Hooks: Sturdy hooks on both ends offer additional stability and mounting options.
Què hi ha a la caixa
- EverBrite Rechargeable Underhood Work Light (Model E111014AE)
- Cable de càrrega USB-C
- Manual d'instruccions
Image: Diagram showing the light strip, switch button, magnetic base, charging port, charging indicator, adjustable strap, and hook components.
Configuració i instal·lació
- Prepare the Light: Unfold the work light. Ensure the elastic straps are properly attached to the magnetic ends.
- Position on Hood: Open the vehicle's hood. Place the magnetic ends of the light onto the metal frame of the hood. The magnets will securely hold the light in place.
- Assegurar amb corretges: Extend the adjustable elastic straps over the hood. Hook the ends of the straps onto suitable points on the hood or vehicle frame to provide additional stability and prevent accidental dislodgement. Adjust the strap length to ensure a snug fit across the hood (compatible with hoods 52 to 75 inches wide).
- Ajusta la direcció de la llum: The flexible light strip can be bent and angled to direct illumination precisely where needed within the engine bay.
Image: The EverBrite work light installed under a car hood, illuminating the engine bay. The adjustable straps are visible.
Imatge: Primer pla view of the hanging hooks on the EverBrite work light, designed for securing the fixture.
Image: The magnetic base of the EverBrite work light attached to a metal pegboard, demonstrating its hands-free capability.
Instruccions de funcionament
- Encès/apagat: Short press the switch button located on either end of the light to turn it ON.
- Recorre els modes: Once ON, short press the switch button repeatedly to cycle through the three lighting modes: High, Medium, Low, and then OFF.
- Mode Sequence: High Brightness → Medium Brightness → Low Brightness → OFF.
Image: The EverBrite work light displaying its three distinct lighting modes: Low (200LM, 14H), Medium (400LM, 6H), and High (900LM, 3.5H).
Vídeo: Un overview of the EverBrite Rechargeable Underhood Work Light, demonstrating its features and operation.
Instruccions de càrrega
- Connecta el carregador: Locate the USB-C charging port on the side of the light. Open the protective cover and insert the provided USB-C cable.
- Monitor de l'estat de càrrega: An LED indicator will illuminate red to show that the device is charging.
- Indicació de càrrega completa: The LED indicator will turn green when the battery is fully charged. A full charge typically takes approximately 2 hours.
- Desconnectar: Once fully charged, disconnect the USB-C cable and close the protective cover to maintain water resistance.
Precaució: Do not operate the light while it is charging.
Image: Close-up of the EverBrite work light showing the USB-C charging port and the red/green LED charging indicators.
Manteniment
- Neteja: Netegeu la llum amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Emmagatzematge: Store the work light in a cool, dry place away from direct sunlight when not in use.
- Cura de la bateria: To prolong battery life, charge the device fully before long-term storage and recharge every 3-6 months.
Resolució de problemes
- La llum no s'encén:
- Assegureu-vos que la bateria estigui carregada. Connecteu-la a una font d'alimentació i comproveu l'indicador de càrrega.
- Premeu el botó d'encesa amb fermesa.
- Light Not Holding Charge:
- Verifiqueu que el cable de càrrega i l'adaptador funcionin correctament.
- Assegureu-vos que el port de càrrega estigui net i lliure de residus.
- Magnets Not Holding Securely:
- Ensure the surface is clean and metallic.
- Use the adjustable straps and hooks for additional support, especially on uneven or painted surfaces.
Especificacions
| Paràmetre | Valor |
|---|---|
| Font d'alimentació | Bateria de ions de liti |
| Capacitat de la bateria | 2200 mAh |
| Brillantor màxima | 1000 LM |
| Max Running Time (Low Mode) | Fins a 14 hores |
| Max Running Time (High Mode) | Fins a 3.5 hores |
| Pes | 10.9 unces (310 g) |
| Dimensions | 8.66 x 4.72 x 2.05 inches (1400*40*32MM) |
| Distància màxima del feix | 40M |
| Port de càrrega | USB-C (2 ports) |
| Hood Compatibility | De 52 a 75 polzades d'ample |
Informació de seguretat
- Do not look directly into the light source when operating on high brightness to avoid eye strain.
- Mantenir fora de l'abast dels nens.
- No desmunteu ni modifiqueu el producte.
- Avoid exposing the product to extreme temperatures or direct flame.
- Assegureu-vos que la tapa del port de càrrega estigui ben tancada quan no es carrega per mantenir la resistència a l'aigua.
Garantia i Suport
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EverBrite weblloc.
