Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ELEGRP Slide Dimmer Switch, Model DM17. This dimmer switch is designed for use with dimmable LED, CFL, and incandescent light bulbs, offering both single-pole and 3-way control options. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Informació de seguretat
WARNING: Risk of Electric Shock. May result in serious injury or death. Turn off power at circuit breaker before installing.
- Consult with a qualified electrician or read through the instruction inside the package before using this product.
- Ensure the power is OFF at the circuit breaker or fuse box before attempting any wiring.
- Do not use with non-dimmable bulbs.
- Instal·leu segons tots els codis elèctrics nacionals i locals.
- Només per a ús interior.
Contingut del paquet
- ELEGRP Slide Dimmer Switch (DM17)
- Placa de paret sense cargols
- Instruccions d'instal·lació (aquest manual)
- Etiquetes de filferro
- Connectors de filferro
Especificacions
| Característica | Detall |
|---|---|
| Número de model | DM17 |
| Marca | ELEGRP |
| Mode d'operació | Off, Slide Dimmer |
| Valoració actual | 3.75 Amps |
| Vol. Operatiutage | 125 volts (CA) |
| Tipus de contacte | Single-pole Double-throw |
| Tipus de connector | Quick Connect, Screw |
| Terminal | SPST |
| Tipus de circuit | Single Pole / 3-Way |
| Tipus d'actuador | Pulsador |
| Dimensions del producte | 1.93 x 2.8 x 4.57 polzades |
| Compatibilitat | 150W Dimmable LED/CFL, 600W Incandescent |
Guia d'instal·lació
Abans de començar
- Apagueu l'alimentació a l'interruptor o a la caixa de fusibles.
- Traieu la placa de paret existent i l'interruptor.
- Identify the wires: Line (hot), Load, Ground, and Traveler (for 3-way applications). Use wire labels provided.
- This dimmer switch does NO require a neutral wire.
Instruccions de cablejat
The ELEGRP DM17 dimmer switch can be installed in either a single-pole or 3-way configuration. Refer to the diagram below for typical wiring connections.
Figura 1: Wiring diagram for the ELEGRP Slide Dimmer Switch. This illustration shows the connections for Ground (green), Line (black), Load (black), and a 3-way wire (red). Wire connectors are used to secure connections.
- Cable de terra: Connect the green ground wire from the dimmer to the bare copper or green ground wire in the wall box.
- Cable de línia: Connect one of the black wires from the dimmer to the incoming hot (line) wire from the circuit breaker.
- Cable de càrrega: Connect the other black wire from the dimmer to the load wire that goes to the light fixture.
- 3-Way Wiring (if applicable): For 3-way installations, connect the red wire from the dimmer to the traveler wire from the other 3-way switch. Ensure the other 3-way switch is a standard 3-way switch (not another dimmer).
- Assegureu totes les connexions amb connectors de cable.
- Empenyeu amb cura tots els cables de nou a la caixa de paret.
- Mount the dimmer switch to the wall box using the provided screws.
- Attach the screwless wall plate. The ultra-slim profile of the dimmer ensures it fits easily within standard electrical boxes.
Figura 2: Pro ultra primfile of the dimmer switch, illustrating its compact design for easy installation in electrical boxes.
Post-instal·lació
Once installation is complete, restore power at the circuit breaker. Test the dimmer switch functionality.
Instruccions de funcionament
The ELEGRP Slide Dimmer Switch features a rocker paddle for on/off control and a slide bar for dimming adjustments.
Figura 3: Detallada view of the dimmer switch controls, including the smooth slider for precise dimming, the initial brightness controller, and the on/off rocker paddle switch.
- Control d'encesa/apagada: Press the bottom rocker paddle to turn the lights ON or OFF. The paddle sits flush with the surface when the switch is off.
- Control d'atenuació: Use the vertical slide bar to adjust the light brightness. Slide up for brighter light, and down for dimmer light. The slider provides smooth and precise dimming.
- Comentaris hàptics: The slider provides haptic feedback when reaching approximately 50% brightness, allowing for quick adjustment to a common light level.
- Initial Brightness Controller: A small dial (often located behind the wall plate or on the side of the dimmer module) allows you to set the optimal dimming range for different bulb types. Adjust this controller to prevent flickering or to achieve the desired minimum brightness level for your specific bulbs.
Compatibilitat
The ELEGRP DM17 dimmer switch is universally compatible with a variety of dimmable lighting loads:
Figura 4: Compatibility chart showing supported bulb types and their maximum wattages.
- LED regulable: Up to 150 Watts / 120V
- Dimmable CFL: Up to 150 Watts / 120V
- Incandescent: Up to 600 Watts / 120V
Nota: Ensure your CFL/LED lamps are specifically labeled as dimmable for proper operation and to avoid damage or flickering.
Manteniment
- To clean the dimmer switch and wall plate, wipe with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Periodically check for loose connections or signs of wear. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
Resolució de problemes
| Problema | Possible causa/solució |
|---|---|
| Lights do not turn ON or flicker |
|
| Dimming range is not satisfactory |
|
| Dimmer switch is warm to the touch | It is normal for dimmers to feel warm during operation. If it becomes excessively hot, turn off power and consult an electrician. Ensure the load does not exceed the dimmer's maximum wattage. |
| Rocker paddle feels stiff or unresponsive | Ensure the switch is properly seated in the wall box and the wall plate is not obstructing movement. If issues persist, contact support. |
Garantia i Suport
ELEGRP products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, ELEGRP typically offers customer support and may provide replacements for defective units. For assistance, technical support, or warranty inquiries, please contact ELEGRP customer service through their official weblloc web o el venedor on es va comprar el producte.
Per a més informació, visiteu l'oficial ELEGRP Store.
