1. Introducció i finalview
This manual provides essential information for the proper installation, operation, and maintenance of your DD Audio VO-MN310-S4 10-inch Pro Audio Neo Midrange Speaker. The VO-MN310-S4 is engineered for high efficiency and broad bandwidth, featuring a supercharged Neodymium ring magnet and an ultralight long fiber pulp cone. It is designed to deliver precise audio reproduction, particularly in vocal and tweeter frequency ranges, and is suitable for challenging environments such as motorcycles, boats, and UTVs.
Figura 1: Frontal view of the DD Audio VO-MN310-S4 Midrange Speaker.
2. Característiques del producte
- Material del con: Treated Long Fiber Paper Cone with Cloth Surround for durability and sound quality.
- Resposta de freqüència: Wide bandwidth from 70Hz to 14KHz for detailed audio reproduction.
- Bobina de veu: 38mm (1.5-inch) Vented Kapton Former with Copper Clad Aluminum (CCA) wire.
- Magnet System: Main Neodymium Ring Magnet with a Supercharged Neo Ring for high efficiency.
- Disseny del motor: Low Inductance/Distortion Faraday Shorting Ring Motor for improved sound clarity.
- Former Cap: Ultralight design extends upper frequency response.
3. Especificacions tècniques
Figura 2: posterior view of the DD Audio VO-MN310-S4 Midrange Speaker, highlighting the magnet and terminals.
| Paràmetre | Valor |
|---|---|
| Mida de l'altaveu | 10 polzades |
| Gestió de potència RMS | 200 watts |
| Impedància | 4 Ohm (S4) |
| Voice Coil Diameter (VCD) | 1.5 polzades (38 mm) |
| Resposta de freqüència | 70 Hz - 14 kHz |
| Resonant Frequency (Fs) | 63 Hz |
| Q mecànic (Qms) | 5.48 |
| Q elèctrica (Qes) | 0.5 |
| Q total (Qts) | 0.45 |
| Volum equivalent (Vas) | 48.48 litres |
| Sensitivity (dBSPL) | 100 dB |
| Producte BL (BL) | 8.8 TM |
| Excursió lineal (Xmax) | 5 mm |
| Viatge en suspensió | 15 mm |
| Diàmetre de muntatge | 9.25 polzades (233 mm) |
| Profunditat de muntatge | 3.75 polzades (95 mm) |
| Material | Alumini (marc) |
| Pes de l'article | 4 lliures |
| Nivell de resistència a l'aigua | Resistent a l'aigua |
Figura 3: Pro lateralfile of the DD Audio VO-MN310-S4 Midrange Speaker, illustrating mounting depth.
4. Configuració i instal·lació
Proper installation is crucial for optimal performance and longevity of your speaker. It is highly recommended that installation be performed by a qualified professional car audio technician. Incorrect wiring or mounting can damage the speaker, amplificador o sistema elèctric del vehicle.
4.1 Muntatge
- Ensure the mounting location provides sufficient depth and diameter as specified in Section 3.
- Use appropriate mounting hardware to secure the speaker firmly. Avoid over-tightening, which can distort the speaker frame.
- Ensure the mounting surface is rigid and free from obstructions.
4.2 Cablejat
- Connecteu l'altaveu a un amplifier capable of delivering 200 Watts RMS at 4 Ohms.
- Observe correct polarity (+ to + and - to -) when connecting the speaker to the amplifier. Incorrect polarity can lead to reduced sound quality and imaging.
- Use high-quality speaker wire of adequate gauge to minimize power loss and ensure proper current delivery.
- Assegureu-vos que totes les connexions estiguin segures i aïllades per evitar curtcircuits.
4.3 Configuració del crossover
As a midrange speaker, the VO-MN310-S4 is designed to reproduce frequencies within the 70Hz to 14KHz range. It is essential to use an external crossover (either active or passive) to filter out frequencies outside this range.
- Set a high-pass filter (HPF) at or above 70Hz to protect the speaker from damaging low frequencies.
- Set a low-pass filter (LPF) at or below 14KHz to integrate smoothly with tweeters in a multi-speaker system.
- Consulta el teu amplifier or head unit's manual for specific crossover adjustment procedures.
5. Instruccions de funcionament
Once installed, proper operation ensures the best sound quality and extends the life of your speaker.
- AmpConfiguració del guany del lificador: Carefully set the gain on your amplifier. Start with the gain at minimum and slowly increase it until the desired volume is achieved without distortion. Over-driving the amplifier (clipping) can severely damage the speaker.
- Control de volum: Use your head unit's volume control for daily adjustments. Avoid operating the system at maximum volume for extended periods if distortion is present.
- Període d'entrada: Allow a break-in period of approximately 20-30 hours of normal listening before evaluating the speaker's full performance. This allows the suspension components to loosen and reach their optimal compliance.
- Consideracions ambientals: While the speaker is water-resistant, avoid direct exposure to high-pressure water jets or prolonged submersion. Ensure proper ventilation around the speaker and ampmés viu.
6. Manteniment
Regular, simple maintenance can help preserve the appearance and performance of your DD Audio speaker.
- Neteja: Utilitzeu un suau, sec o lleugerament damp cloth to wipe down the speaker frame and cone. Avoid using harsh chemicals, solvents, or abrasive cleaners.
- Inspecció: Periodically inspect the speaker for any signs of damage to the cone, surround, or connections. Ensure mounting screws remain tight.
- Protecció del medi ambient: If installed in an open-air environment (e.g., boat, UTV), consider using protective covers when the vehicle is not in use to shield from prolonged sun exposure or heavy moisture.
7. Solució De Problemes
If you experience issues with your speaker, refer to the following common troubleshooting steps.
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so de l'altaveu |
|
|
| So distorsionat |
|
|
| So feble o apagat |
|
|
8. Garantia i Suport
The DD Audio VO-MN310-S4 speaker comes with a Garantia limitada. Specific terms and conditions of the warranty are provided at the time of purchase or can be obtained by contacting DD Audio directly.
For technical support, warranty claims, or further assistance, please contact DD Audio customer service through their official website or authorized dealer. Please have your product model number (VO-MN310-S4) and proof of purchase available when seeking support.
