Hilitand 6-Digit LCD Digital Counter

1. Introducció

This manual provides detailed instructions for the proper setup, operation, and maintenance of your Hilitand 6-Digit LCD Digital Counter. Please read this manual thoroughly before using the device to ensure safe and efficient operation. Keep this manual for future reference.

2. Producte acabatview

2.1 Característiques clau

• Disseny robust: Seismic-proof construction ensures no mechanical wear for extended service life.
• Pause & Resume Function: Press the POWER button to pause the count, save data, and easily resume counting with magnet induction technology.
• Velocitat de recompte ràpida: Panel mount screws allow for counting up to 20 times per second, ensuring accurate and quick results.
• Pantalla LCD gran: Six-digit screen with clear display and ultra-low power consumption for prolonged battery life.
• Convenient Battery: Uses ordinary AA batteries for easy replacement; no external power needed for simple operations.

2.2 Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:

• 1 x Digital Counter
• 1 x Magnetic Control Induction Switch
• 1 x imant
• 1 x suport

2.3 Components del producte

Figura 1: Frontal view of the Hilitand 6-Digit LCD Digital Counter, showing the 6-digit display and three control buttons (POWER, RESET).

Figura 2: Detallada view of the counter. The top shows the display and buttons: 'POWER' (pause), 'RESET' (clear). The bottom shows wiring instructions for 'RESET' and 'COUNT' terminals, a battery cover, and connections for an external clear switch and sensor.

Figura 3: superior i inferior views of the digital counter. The top view shows the display and buttons. The bottom view shows the wiring terminals for count and reset, along with the battery compartment.

3. Configuració

3.1 Instal·lació de la bateria

1. Locate the battery cover on the back of the counter (refer to Figure 2).
2. Obriu la tapa de la bateria.
3. Insert one 1.5V AA battery, ensuring correct polarity (+/-).
4. Tanqueu la tapa de la bateria amb seguretat.

The counter operates on a single AA battery and does not require an external power supply.

3.2 Muntatge

The counter can be mounted using the panel mount screws. Ensure the mounting location is stable and allows for clear visibility of the display.

3.3 Connexió del sensor

Connect the magnetic control induction switch to the 'COUNT' terminals on the back of the counter. An optional external reset switch can be connected to the 'RESET' terminals.

Figure 4: Wiring diagram illustrating the connection of the magnetic control induction switch to the 'COUNT' terminals and an optional external reset switch to the 'CLEAR' terminals. The diagram also shows how the magnet interacts with the induction switch to trigger a count.

4. Instruccions de funcionament

4.1 Basic Counting Operation

The counter operates based on magnetic induction. To increment the count:

1. Bring the magnet into the sensing range of the induction switch (approximately 10-15mm).
2. Move the magnet out of the sensing range (beyond approximately 35mm).

Each complete cycle of the magnet entering and leaving the sensing range will increment the counter by one. The maximum counting speed is 20 times per second.

4.2 Pause and Resume Function

Premeu el botó PODER button (labeled 'POWER' or '暂停' in some versions) to pause the counting operation. The current count will be saved. Press the PODER button again to resume counting from the saved value.

4.3 Clear/Reset Function

To reset the counter to zero:

• Using the Reset Button: Premeu el botó RESET button (labeled 'RESET' or '清零' in some versions) on the front panel. Hold for at least 1 second to clear the display.
• Using External Reset (Optional): If an external reset switch is connected, activate it for at least 1 second to clear the display.

Figura 5: Primer pla view of the counter's display and buttons. The 'POWER' button pauses the count, the 'RESET' button clears the count, and an 'OK' indication may appear on the display.

5. Manteniment

5.1 Substitució de la bateria

When the display becomes dim or the counter stops responding, it is time to replace the AA battery. Follow the battery installation steps in Section 3.1.

5.2 Neteja

Wipe the counter's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the display or casing.

6. Solució De Problemes

• Counter not incrementing:
  • Comproveu el nivell de la bateria i substituïu-la si cal.
  • Ensure the magnetic control induction switch is correctly connected to the 'COUNT' terminals.
  • Verify the magnet is passing within the specified sensing range (10-15mm) and then leaving the sensing range (beyond 35mm).
  • Ensure the counter is not in pause mode (check the display for any pause indicators).
• La pantalla està tènue o en blanc:
  • Substituïu la bateria AA.
  • Assegureu-vos que la pila estigui inserida amb la polaritat correcta.
• Counter resets unexpectedly:
  • Check for accidental activation of the RESET button or external reset switch.
  • Ensure stable power supply from the AA battery.

7. Especificacions

8. Garantia i Suport

Specific warranty information for this product is not provided in the available documentation. For warranty claims, technical support, or any inquiries regarding your Hilitand Digital Counter, please contact the manufacturer or your point of purchase directly.