1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your BAFANG C020 Ebike Display. The C020 display is designed to provide essential riding data and control for your ebike, ensuring a safe and informed riding experience. Please read this manual thoroughly before using the product.
Image: The BAFANG C020 Ebike Display, showing its sleek design and how it appears when mounted on bicycle handlebars, displaying speed and trip information.
2. Compatibilitat
The BAFANG C020 Ebike Display is specifically designed for compatibility with certain BAFANG mid-drive motors and communication protocols. Ensuring correct compatibility is crucial for proper function.
- Compatibilitat del motor: This display is compatible with BAFANG BBS motor NEWEST (CAN version), M620, M600, M560, M510, and M420 mid-drive motors. It is NOT compatible with other motor types or older BBS motors using UART protocol.
- Protocol: The C020 display operates on the CAN protocol. It is NOT compatible with UART protocol systems.
- Voltage: Compatible with DC 36V, 43V, and 48V systems.
- Connector: Features a 5-pin male triangular connector. Please verify your bike's connector shape before purchase.
Image: A visual guide illustrating the compatibility of the C020 display with BAFANG CAN protocol motors (M620, M600, M560, M510, M420) and highlighting the required 5-pin male triangular connector, differentiating it from incompatible UART protocol and other motor types.
Imatge: Una imatge detallada view of the 5-pin male connector extending from the BAFANG C020 display, emphasizing its unique triangular shape for proper identification and compatibility verification.
3. Configuració i instal·lació
Follow these steps to properly install your BAFANG C020 Ebike Display on your bicycle.
3.1 Contingut del paquet
En obrir el paquet, assegureu-vos que hi hagi tots els components:
- BAFANG C020 Display Unit
- Remote Control Unit (pre-connected via cable)
- Mounting Brackets for Display (with screws)
- Handlebar Reducers/Gaskets (2 pairs)
- Rubber Gasket for Remote Control
3.2 Muntatge de la pantalla
- Tria la ubicació: Select a suitable position on your handlebars for the display. The display is designed for handlebars with a diameter of 22 mm or 31.8 mm.
- Col·loca els suports: Place the display's mounting brackets around the handlebar. If your handlebar diameter is smaller, use the provided handlebar reducers (gaskets) to ensure a snug fit. The reducers allow fitting from a maximum of 3.7 cm down to 2 cm diameter.
- Pantalla segura: Close the brackets and secure the display unit firmly using the supplied screws. Ensure the display is oriented correctly for optimal viewing.
3.3 Muntatge del comandament a distància
- Position Remote: Position the remote control unit on your handlebar, typically near your thumb for easy access.
- Control remot segur: Use the small circular bracket and screw to secure the remote control. A rubber gasket is provided to prevent slipping and rotation.
- Gestió de cables: The remote control is pre-connected to the display via a cable. Route this cable neatly along your handlebars and frame, securing it with cable ties if necessary, to prevent interference with steering or other bike components.
Image: A technical diagram detailing the dimensions of the BAFANG C020 display (58.4mm width, 98.4mm length, 86mm screen diagonal) and its remote control, along with compatible handlebar diameters (22.2mm/31.8mm) for mounting.
4. Instruccions de funcionament
The BAFANG C020 display provides clear, real-time information and control over your ebike's functions.
4.1 Mostra finalview
The 3.4-inch LCD screen offers high contrast for easy readability, even in bright conditions. Key information displayed includes:
- Indicador de nivell de bateria
- Velocitat actual (km/h o mph)
- Pedal Assist System (PAS) Level
- Distància del viatge (TRIP)
- Odòmetre (ODO)
- Maximum Speed (MAX)
- Average Speed (AVG)
- Riding Time (TIME)
- Auto Head Lamp Indicador
- Walk Assist Mode Indicator
Image: A clear depiction of the BAFANG C020's color LCD screen, highlighting the various data points and indicators such as current speed, battery level, pedal assist mode, trip distance, and other riding metrics.
4.2 Pedal Assist Levels (PAS)
The display allows you to select from 5 pedal assist levels, providing varying degrees of motor assistance:
- 0: No assist
- 1 (ECO): Minimal assist, maximum range
- 2 (TOUR): Moderate assist for comfortable cruising
- 3 (SPORT): Stronger assist for varied terrain
- 4 (SPORT+): High assist for challenging conditions
- 5 (BOOST): Maximum assist for steep climbs or quick acceleration
Use the buttons on the remote control to cycle through these assist levels. The remote control typically includes buttons for power on/off and navigation within the display's menu.
Image: The BAFANG C020 display illustrating the five distinct pedal assist levels (ECO, TOUR, SPORT, SPORT+, BOOST) and the accompanying remote control unit used for adjusting these settings.
4.3 Navegació i configuració del menú
The display features a menu system for accessing additional settings and information. While specific navigation details may vary slightly, common functions include:
- Resetting trip data
- Changing units (km/h to mph)
- Ajust de la brillantor de la llum de fons
- Accessing diagnostic information
Refer to the on-screen prompts and use the remote control buttons to navigate the menu. Some advanced settings may require specific button combinations or sequences.
5. Manteniment
Proper care and maintenance will extend the lifespan of your BAFANG C020 Ebike Display.
5.1 Neteja
Wipe the display screen and housing with a soft, damp drap. Eviteu utilitzar netejadors abrasius, dissolvents o productes químics agressius, ja que poden danyar la pantalla o la casing.
5.2 Resistència a l'aigua
The BAFANG C020 display has an Classificació impermeable IP66. This means it is protected against powerful water jets and can withstand light to moderate rain, allowing for riding in various weather conditions. However, it is not designed for submersion in water. Avoid high-pressure washing directly onto the display.
Image: The BAFANG C020 display shown with water droplets, visually representing its IP66 waterproof rating, indicating its resilience against water splashes and rain.
5.3 Emmagatzematge
When not in use for extended periods, store your ebike and display in a dry, cool place, away from direct sunlight and extreme temperatures.
6. Solució De Problemes
This section addresses common issues you might encounter with your BAFANG C020 Ebike Display.
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla no s'encén. |
|
|
| Incorrect speed or distance readings. |
|
|
| Pedal assist not working or inconsistent. |
|
|
| Display shows lower than expected motor power (specific to some setups). |
| While the display accurately reports power, some specific ebike models (e.g., certain Fischer pedelecs) may experience a perceived reduction in maximum power output when paired with this display compared to their original display. This is often due to the ebike's controller firmware rather than a display malfunction. Consult your ebike manufacturer or a qualified ebike technician for potential firmware updates or compatibility advice. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact BAFANG customer support or a certified ebike technician.
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | Bafang |
| Nom del model | Pantalla C020 |
| Mida de la pantalla | 3.4 polzades |
| Tipus de visualització | Pantalla LCD a color |
| Protocol de comunicació | CAN Protocol (5-Pin Male Triangular Connector) |
| Motors compatibles | BAFANG BBS NEWEST (CAN version), M620, M600, M560, M510, M420 mid-drive motors |
| Voltage Compatibilitat | DC 36V / 43V / 48V |
| Nivells PAS | 0-5 (ECO/TOUR/SPORT/SPORT+/BOOST) |
| Classificació impermeable | IP66 |
| Material de closca | ABS |
| Material del panell | Aluminum Silicon Glass |
| Pes de l'article | 0.23 quilos |
| Tipus de muntatge | Handlebar Mount (22mm / 31.8mm diameter) |
| Components inclosos | Display unit, remote control |
8. Garantia i Suport
8.1 Informació de la garantia
The BAFANG C020 Ebike Display comes with a 1 any de garantia from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
8.2 Atenció al client
For technical assistance, warranty claims, or any questions regarding your BAFANG C020 Ebike Display, please contact BAFANG customer support through their official website or the retailer from whom you purchased the product. Please have your purchase receipt and product model information ready when contacting support.
You can visit the official BAFANG store for more information: BAFANG Store on Amazon
