Introducció
This manual provides essential information for the proper installation, operation, and maintenance of your SRAM Eagle AXS Pod Controller. Please read this manual thoroughly before using the product to ensure safe and efficient performance.
Figure 1: SRAM Eagle AXS Pod Controller
The SRAM Eagle AXS Pod Controller is an electronic bicycle shifter designed for precise and reliable gear changes. It features a compact design and intuitive controls for an enhanced riding experience.
Informació de seguretat
- Always ensure all components are securely fastened before riding. Loose components can lead to loss of control and injury.
- Refer to a qualified bicycle mechanic for installation if you are unsure about any steps.
- Regularly inspect the controller and associated components for wear or damage. Replace worn or damaged parts immediately.
- Keep the controller and battery away from extreme temperatures and moisture.
- Do not attempt to disassemble or modify the controller, as this may void the warranty and cause malfunction.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- SRAM Eagle AXS Pod Controller (1 unit)
- Muntatge Clamp (for handlebar attachment)
- Pila CR2032 (preinstal·lada o separada)
- Guia d'inici ràpid (si escau)
Configuració
1. Installation on Handlebar
- Posicionament: Determine the optimal position for the controller on your handlebar. The clamp-on mount allows for flexible placement.
- Adjunt: Obriu el muntatge clamp and place it around the handlebar. Secure the clamp using the provided bolt and a T25 Torx wrench. Tighten to the manufacturer's specified torque (refer to the quick start guide or SRAM's official documentation for exact torque specifications).
- Orientació: Adjust the angle of the controller for ergonomic access to the buttons.
Figure 2: Controller mounted on handlebar
The image shows the SRAM AXS Pod Electronic Controller securely mounted on a bicycle handlebar, illustrating its compact design and button placement.
2. Pairing with AXS Components
The AXS Pod Controller must be paired with your SRAM AXS derailleur and other AXS components.
- Wake Up Components: Ensure all AXS components (derailleur, dropper post if applicable) are awake by pressing their AXS buttons briefly.
- Introduïu el mode de vinculació: Press and hold the AXS button on the derailleur until the LED flashes slowly.
- Controlador de parella: Press and hold the AXS button on the Pod Controller until its LED flashes slowly.
- Confirmeu l'aparellament: Once both LEDs flash rapidly and then turn solid green, the components are paired. Repeat for any other AXS components.
Figure 3: SRAM AXS Pod Controller
This image displays the SRAM AXS Pod Controller, highlighting its design and the AXS branding, indicating its compatibility within the SRAM AXS ecosystem.
Instruccions de funcionament
Canvi de marxes
The AXS Pod Controller features two distinct buttons for shifting. By default, the upper button shifts to a larger cog (easier gear), and the lower button shifts to a smaller cog (harder gear).
- Up-shift (Easier Gear): Premeu el botó botó superior breument.
- Down-shift (Harder Gear): Premeu el botó botó inferior breument.
- Multi-shift: Hold down either button to shift multiple gears in succession. The number of gears shifted can be customized via the AXS app.
Customization with AXS App
For advanced customization, download the SRAM AXS app on your smartphone. The app allows you to:
- Reverse shift logic (upper button for harder gear, lower for easier).
- Adjust multi-shift settings (number of gears shifted per hold).
- Monitor battery levels of all AXS components.
- Update firmware for improved performance and features.
Manteniment
Neteja
- Netegeu el controlador amb un anunciamp drap per eliminar la brutícia i la pols. Eviteu utilitzar productes químics agressius o netejadors abrasius.
- Do not spray water directly into the controller or its buttons.
Canvi de bateria
The AXS Pod Controller uses a CR2032 coin cell battery.
- Accés al compartiment de la bateria: Locate the battery cover on the underside of the controller.
- Treure la bateria antiga: Use a small coin or flat-head screwdriver to gently open the cover and remove the old CR2032 battery.
- Inseriu una bateria nova: Inseriu una nova bateria CR2032 amb el costat positiu (+) cap amunt.
- Cobertura segura: Replace the battery cover and ensure it is securely closed to maintain water resistance.
Nota: Eliminar les bateries usades de manera responsable d'acord amb la normativa local.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El controlador no respon | Bateria baixa o esgotada | Substituïu la bateria CR2032. |
| El controlador no respon | Not paired with AXS components | Perform pairing procedure as described in the Setup section. |
| Shifting is inconsistent or delayed | Interferència o senyal feble | Ensure no strong electromagnetic interference sources are nearby. Check battery levels of all AXS components. |
| Cannot customize settings via AXS app | Problema de connexió Bluetooth | Ensure Bluetooth is enabled on your device. Bring your device closer to the bike. Restart the app and components. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | SRAM |
| Nom del model | 107603 |
| Número de part | 00.3018.313.002 |
| UPC | 710845891502 |
| Material | Compost |
| Tipus de muntatge | Clamp-On Mount |
| Pes de l'article | 0.25 lliures (aprox. 0.11 kg) |
| Dimensions de l'article (LxWxH) | 8 x 5.25 x 2.5 polzades (aprox. 20.3 x 13.3 x 6.35 cm) |
| Tipus de bateria | Cèl·lula monedera CR2032 |
| Connectivitat | SRAM AXS Wireless Protocol |
Garantia i Suport
SRAM products are covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official SRAM weblloc web o la targeta de garantia inclosa amb el producte.
For technical support, troubleshooting assistance, or to locate an authorized service center, please visit the official SRAM support page: www.sram.com/en/sram/support
