Wiltec Farmardom Power Offroad Jack (Model 65300) Instruction Manual

1. Introducció

This manual provides essential information for the safe and proper use of your Wiltec Farmardom Power Offroad Jack, Model 65300. Please read all instructions carefully before operating the jack to ensure personal safety and prevent damage to the equipment or property. Keep this manual for future reference.

2. Instruccions de seguretat

Si no es segueixen aquestes instruccions de seguretat, es poden produir lesions greus o la mort.

• Llegiu tot el manual: Comprendre tots els procediments operatius i els avisos de seguretat abans d'utilitzar-lo.
• Capacitat de pes: Never exceed the maximum lifting capacity of 3000 kg (6600 lbs).
• Superfície estable: Always operate the jack on a firm, level, and stable surface. Avoid soft ground or uneven terrain.
• Càrrega segura: Ensure the load is stable and properly secured before lifting. Use appropriate lifting points on the vehicle or object.
• Support the Load: Once the load is lifted, immediately support it with appropriate jack stands or other stable supports. Never work under a load supported only by the jack.
• Àrea clara: Keep hands, feet, and other body parts clear of moving parts and the load during operation.
• Inspeccionar abans d'utilitzar: Before each use, inspect the jack for any signs of damage, wear, or loose components. Do not use if damaged.
• Descens correcte: Lower the load slowly and in a controlled manner. Be aware that some jacks of this type may lower quickly if not handled correctly.
• Equips de protecció individual: Utilitzeu l'equip de seguretat adequat, inclosos guants i protecció ocular.
• Infants i espectadors: Mantenir els nens i els espectadors allunyats de la zona de treball.
• Emmagatzematge: Store the jack in a dry, safe place, out of reach of children.

3. Producte acabatview

The Wiltec Farmardom Power Offroad Jack is a robust lifting tool designed for heavy-duty applications, including off-road vehicles, farm machinery, and general lifting tasks. It features a two-piece handle for improved stability and control.

3.1 Components

• Mecanisme d'elevació: The main assembly that engages with the vertical bar.
• Vertical Bar (Beam): The perforated steel bar along which the lifting mechanism travels.
• Mànec: The two-piece lever used to operate the lifting mechanism.
• Placa base: Provides stability on the ground.
• Lifting Nose/Foot: The part that makes contact with the load.
• Reversing Latch: Lever to switch between lifting and lowering modes.

Figura 1: Acabatview of the Wiltec Farmardom Power Offroad Jack. This image displays the complete jack assembly, including the red handle, black vertical bar, red lifting mechanism, and red base plate.

Figura 2: Product Dimensions. This diagram illustrates the key measurements of the jack, including a total height of 1530 mm, a lifting range of 129 mm to 1350 mm, handle length of 1070 mm, and base dimensions of 250 mm x 100 mm.

4. Configuració

The Wiltec Farmardom Power Offroad Jack typically comes pre-assembled. Before first use, ensure all components are securely fastened and inspect for any shipping damage.

1. Desembalar: Carefully remove the jack from its packaging.
2. Inspeccionar: Check all parts for damage or missing components. Ensure the handle is securely attached and the lifting mechanism moves freely along the vertical bar.
3. Lubricar: Apply a light coat of general-purpose grease to the moving parts of the lifting mechanism and the vertical bar to ensure smooth operation.

5. Instruccions de funcionament

Always follow safety instructions before operating the jack.

5.1 Lifting a Load

1. Prepara la zona: Position the vehicle or object on a firm, level surface. Engage parking brakes and block wheels if applicable.
2. Col·loca el Jack: Place the jack's base plate firmly on the ground. Position the lifting nose under a suitable, strong lifting point on the load. Ensure the jack is vertical and stable.
3. Set for Lifting: Ensure the reversing latch is in the "UP" position (typically pushed down towards the base).
4. Aixecar la càrrega: Pump the handle up and down. Each downward stroke of the handle will raise the lifting mechanism and the load. Ensure the lifting nose remains securely engaged with the load.
5. Assegurar la càrrega: Once the desired height is reached, immediately place appropriate jack stands or other stable supports under the load. Never rely solely on the jack to hold a lifted load.

Figura 3: Jack in operation, lifting an off-road vehicle. This image demonstrates the jack positioned under a vehicle's chassis, actively lifting it off the ground. The base is firmly on the ground, and the handle is extended.

Figura 4: Lifting Capacity. This image highlights the jack's 3000 kg (3T) lifting capacity, shown in context with a vehicle wheel, emphasizing its heavy-duty capability.

Figura 5: Adjustable Lift Height. This image illustrates the jack's adjustable lifting range, from 129 mm to 1350 mm, suitable for various vehicle types and lifting requirements.

5.2 Baixada d'una càrrega

1. Preparació per a la baixada: Ensure the area around the load is clear. If using jack stands, carefully remove them once the jack is ready to take the load again.
2. Set for Lowering: Move the reversing latch to the "DOWN" position (typically pulled up away from the base).
3. Baixar la càrrega: Slowly and carefully pump the handle up and down. Each downward stroke will lower the lifting mechanism. Control the descent by maintaining a firm grip on the handle. Be aware that the load may descend quickly if the handle is not controlled.
4. Treure Jack: Once the load is fully lowered and stable on the ground, remove the jack.

Figura 6: Easy Operation. This image demonstrates the handle movement for lifting and lowering. It shows the reversing latch and how to engage it to adjust the support plate's position.

6. Manteniment

Un manteniment regular garanteix la longevitat i el funcionament segur del vostre gat.

• Neteja: Keep the jack clean and free from dirt, mud, and debris. Wipe down the vertical bar and moving parts after each use.
• Lubricació: Periodically apply a general-purpose grease or lubricant to the vertical bar and all moving parts of the lifting mechanism to ensure smooth operation and prevent rust.
• Inspecció: Regularly inspect for signs of wear, damage, corrosion, or loose fasteners. Pay close attention to the lifting nose, base plate, handle, and the integrity of the vertical bar.
• Emmagatzematge: Store the jack in a dry, protected area to prevent rust and damage.

Figura 7: Robust Construction. This image highlights the durable components of the jack, including the stable bar, cast iron lever, 5mm thick base, and overall robust steel construction, emphasizing the quality materials used.

7. Solució De Problemes

If you encounter issues with your jack, refer to the following common problems and solutions:

• En Jack no aixeca:
  • Ensure the reversing latch is fully engaged in the "UP" position.
  • Check for obstructions in the lifting mechanism.
  • Lubricate the vertical bar and moving parts.
• Jack lowers too quickly or uncontrollably:
  • Ensure the reversing latch is fully engaged in the "DOWN" position.
  • Control the handle movement carefully during lowering. This type of jack requires a firm and controlled pumping action to lower safely.
  • Inspect the pawls and teeth on the vertical bar for wear or damage.
• Sticking or stiff operation:
  • Clean the vertical bar and lifting mechanism thoroughly.
  • Apply fresh lubricant to all moving parts.
  • Comproveu si hi ha components doblegats o danyats.

If problems persist, discontinue use and contact Wiltec customer support or a qualified service technician.

8. Especificacions

9. Universal Applications

The Wiltec Farmardom Power Offroad Jack is designed for versatility across various demanding tasks:

• Ús fora de carretera: Ideal for lifting vehicles in challenging terrain for tire changes or recovery.
• Reparacions i Manteniment: Suitable for general vehicle servicing and repairs.
• Stump Removal: Can be used as a lever for removing tree stumps.
• Winching: Functions as a manual winch for pulling or tensioning.

Figura 8: Versatile Applications. This image collage shows the jack being used for off-road recovery, vehicle repairs, stump removal, and as a winching tool, demonstrating its multi-purpose functionality.

10. Garantia i Suport

For warranty information, technical support, or to inquire about replacement parts, please contact Wiltec customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can also visit the official Wiltec store for more information: Wiltec Store