Introducció
This manual provides essential instructions for the safe and efficient operation, assembly, and maintenance of your RYOBI 40V Brushless Cordless Leaf Blower, Mulcher, and Vacuum. This versatile tool is designed for blowing, vacuuming, and mulching leaves and light debris, utilizing 40V HP Technology for enhanced performance. Please read this manual thoroughly before initial use and retain it for future reference.

Figure 1: RYOBI 40V Brushless Cordless Leaf Blower, Mulcher, and Vacuum. This image shows the main unit in its vacuum configuration with the collection bag attached.
Característiques del producte
- Single Tube Design: Functions as a blower, vacuum, and mulcher with a single tube for convenience.
- 40V HP Technology: Delivers increased power for gas-like performance.
- Jet Fan Blower: Provides 600 CFM (Cubic Feet per Minute) for high airflow.
- Speed Tip: Increases air speed up to 100 MPH (Miles Per Hour).
- Variable Speed/Cruise Control: Permet un control precís del flux d'aire.
- Selecció del mode: Easily switch between blow and vacuum modes with a dial.
- Durable Metal Impeller: Designed to shred debris and prevent clogs, achieving a 20:1 mulching ratio.
- Bossa de recollida: Includes a 10.5-gallon capacity bag for vacuumed debris.
- Adjustable Harness: Provides balance and comfort during extended use.
Configuració
Nota: This product is sold as a tool only. Battery and charger are NOT included and must be purchased separately. Ensure you use a compatible RYOBI 40V battery.
- Blower Tube Assembly: Align the blower tube with the main unit's outlet and push until it clicks securely into place.
- Instal·lació de la bateria: Slide a charged RYOBI 40V battery into the battery port on the main unit until it locks. Ensure it is fully seated.
- Switching to Vacuum Mode: Locate the mode selection dial on the side of the unit. Turn the dial to the 'Vacuum' position.
- Attaching Collection Bag: Connect the collection bag to the vacuum intake port. Ensure the bag's opening is securely fastened to prevent debris leakage.
- Attaching Harness: Clip the adjustable harness to the designated attachment points on the unit. Adjust the straps for a comfortable and balanced fit across your shoulder or back.
Instruccions de funcionament
Precaucions generals de seguretat
- Always wear safety glasses or goggles and hearing protection during operation.
- Keep bystanders, children, and pets at least 50 feet away from the operating area.
- Do not operate the unit in wet conditions or near water.
- Inspect the work area for objects that could be thrown or entangled in the unit.
Operació de bufat
- Ensure the unit is in blower mode with the blower tube attached.
- Hold the unit firmly with one hand on the main handle.
- Press the trigger to start the blower. The unit features a variable speed trigger; press lightly for lower speed and fully for maximum speed (up to 100 MPH with speed tip).
- Use the cruise control dial to maintain a desired speed without continuously holding the trigger.
- Sweep the blower from side to side, moving leaves and debris into piles.
Vacuuming and Mulching Operation
- Ensure the unit is in vacuum mode with the vacuum tube and collection bag attached.
- Hold the unit firmly and position the vacuum tube over the debris.
- Press the trigger to start the vacuum. The durable metal impeller will shred leaves, reducing them at a 20:1 ratio, and collect them in the bag.
- Move the vacuum tube slowly over the debris, allowing the unit to draw in leaves. Avoid forcing the unit into large piles.
- Superviseu la bossa de recollida i buideu-la quan estigui plena per mantenir un rendiment òptim.
Manteniment
Neteja
- Impeller and Debris Chamber: Regularly inspect the impeller and debris chamber for any clogs or wrapped material. Always remove the battery before cleaning. Use a non-metallic tool to carefully clear any obstructions.
- Exterior: Wipe down the exterior of the unit with a clean, damp tela. No utilitzeu detergents o dissolvents forts.
- Bossa de recollida: Empty the collection bag frequently. Periodically shake out any remaining debris or dust. The bag can be hand-washed with mild soap and water if heavily soiled, then air-dried completely before reattaching.
Cura de la bateria
- Càrrega: Always use the RYOBI-approved charger for your 40V battery. Follow the charger's instructions for proper charging.
- Emmagatzematge: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, ensure batteries are partially charged (around 50%).
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no comença | Bateria no instal·lada correctament o descarregada. | Assegureu-vos que la bateria estigui completament col·locada. Carregueu la bateria si cal. |
| Reduced airflow/suction | Clogged blower/vacuum tube or impeller. Full collection bag. | Remove battery, clear any clogs from tubes/impeller. Empty collection bag. |
| Vibració excessiva | Restes atrapades a l'impel·lent. | Remove battery, inspect and clear impeller of any debris. |
| La unitat es sobreescalfa | Prolonged heavy use or blocked vents. | Allow unit to cool down. Ensure vents are clear of debris. |
Especificacions
- Marca: RYOBI
- Model: RY404015BTL
- Font d'alimentació: Alimentat per bateria (ió de liti de 40 V)
- Voltage: 40 Volts
- Velocitat de l'aire: Up to 100 MPH (with speed tip)
- Volum d'aire: Fins a 600 CFM
- Relació de mulching: 20:1
- Capacitat de la bossa de recollida: 10.5 galons
- Factor de forma: Portàtil
- Característica especial: Lleuger
- Pes de l'article: Aproximadament 20.1 lliures
- Dimensions del producte: 33.5 x 14.25 x 12.6 polzades
- UPC: 046396038869
Garantia i Suport
For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official RYOBI website. If you require technical assistance, replacement parts, or have questions regarding your RYOBI 40V Brushless Cordless Leaf Blower, Mulcher, and Vacuum, please contact RYOBI customer support through their official weblloc web o la informació de contacte que es proporciona a la documentació del producte.





