Introducció
The ARCTIC Liquid Freezer III Pro 360 is an all-in-one (AIO) liquid CPU cooler designed to provide efficient and quiet cooling for high-performance processors. It features a 360mm radiator, three 120mm PWM fans, a PWM-controlled pump, and an integrated VRM fan to ensure optimal thermal performance for your system. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting.
Configuració i instal·lació
Before beginning the installation, please ensure your PC case has adequate space for a 360mm radiator and its fans. Refer to your case's specifications for compatibility.
Component acabatview
Image: The complete ARCTIC Liquid Freezer III Pro 360 AIO CPU Cooler, showcasing the radiator, three fans, pump, and tubing.
Comprovacions prèvies a la instal·lació
- Verify your motherboard socket type (AMD AM5/AM4 or Intel LGA1851/1700).
- Confirm your PC case has sufficient clearance for the radiator and fans.
Image: Radiator dimensions: 398 mm length, 63 mm height (including fans), 38 mm radiator thickness, 25 mm fan thickness. Ensure case compatibility before installation.
Passos d'instal·lació
- Prepareu el sòcol de la CPU: For Intel LGA1851/1700, install the included contact frame to optimize pressure distribution.
- Aplicar pasta tèrmica: The cooler comes with pre-applied thermal paste. If reapplying, ensure the CPU surface is clean before applying a thin, even layer.
- Mount the Cold Plate: Position the cold plate onto the CPU. The cooler features native offset mounting for both AMD and Intel, shifting the cold plate center towards the CPU hotspot for more efficient heat transfer. Secure it with the appropriate mounting hardware for your socket.
- Install the Radiator: Mount the 360mm radiator to an available fan mount in your PC case. Ensure proper airflow direction (intake or exhaust) based on your case's cooling design.
- Connectar els cables: The PWM cables of the radiator fans are integrated into the sleeve of the tubes for simplified cable management. Connect the main All-In-One cable to your motherboard's CPU_FAN header. The integrated VRM fan also connects via PWM.
Image: LGA1851 | LGA1700 Contact Frame: Image showing the optimized contact frame for Intel LGA1851 and LGA1700 sockets, designed for better pressure distribution and heat dissipation.
Image: Native Offset Mounting for AMD and Intel: Diagram illustrating the shifted cold plate center towards the CPU hotspot for improved heat transfer on AMD AM5 and Intel LGA1851/1700 sockets.
Image: Pre-installed Fans and Integrated Cable Management: An illustration of the cooler installed in a PC case, highlighting the pre-installed fans and the integrated cable management system where PWM cables are routed within the tubing sleeves.
Image: Wiring Options: Diagram showing two wiring configurations: 'Full Control' with separate connections for VRM Fan, Radiator Fan, and Pump, and 'Simple Control' with a single All-In-One connection to the motherboard.
Funcionament
The ARCTIC Liquid Freezer III Pro 360 operates automatically based on your motherboard's fan control settings. The PWM (Pulse Width Modulation) control allows for precise adjustment of fan and pump speeds according to CPU temperature, ensuring optimal cooling performance and noise levels.
Fan and Pump Control
- The ARCTIC P12 Pro fans offer high performance across various speeds, providing excellent airflow and static pressure.
- The integrated VRM fan actively cools the voltage regulator modules on your motherboard, contributing to overall system stability and longevity.
Image: ARCTIC P12 Pro Fan Specifications: Fan Speed: 400-3000 RPM, Static Pressure: 6.9 mm H2O, Airflow: 77 CFM (131 m³/h).
Image: Integrated VRM Fan Performance: A bar chart comparing Voltage Regulator Module (VRM) temperatures in Celsius. The Liquid Freezer III Pro shows significantly lower temperatures (72.55°C) compared to Liquid Freezer II (77.85°C) and without active ventilation (90.15°C), demonstrating the effectiveness of the PWM-controlled VRM fan.
Manteniment
Regular maintenance ensures the longevity and optimal performance of your ARCTIC Liquid Freezer III Pro 360.
- Neteja de pols: Netegeu periòdicament les aletes del radiador i les aspes del ventilador per evitar l'acumulació de pols, que pot impedir el flux d'aire i l'eficiència de la refrigeració. Feu servir aire comprimit o un raspall suau.
- Comproveu les connexions: Ensure all fan and pump cables are securely connected to the motherboard.
- Inspeccionar tubs: Occasionally check the tubing for any signs of kinks or damage.
- Pasta tèrmica: While the pre-applied thermal paste is durable, consider reapplying high-quality thermal paste every few years for sustained performance.
Resolució de problemes
If you encounter issues with your cooler, refer to the table below for common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| Temperatures altes de la CPU | Improper cold plate contact; Insufficient thermal paste; Dust buildup on radiator; Incorrect fan orientation; Pump malfunction. | Re-seat cold plate, ensure even pressure; Reapply thermal paste; Clean radiator and fans; Correct fan direction for optimal airflow; Check pump connection and function. |
| Soroll del ventilador excessiu | High fan speed settings; Obstruction in fan blades; Loose fan screws. | Adjust fan curve in BIOS/UEFI; Clear any obstructions; Tighten fan screws. |
| Pump Noise/Gurgling | Air bubbles in the loop; Pump running at low RPM. | Orient radiator with tubes at the bottom if possible; Run pump at 100% for a few minutes to clear bubbles; Adjust pump speed in BIOS/UEFI. |
| No Fan/Pump Operation | Loose power connection; Incorrect motherboard header connection; Faulty component. | Check all power and signal connections; Ensure connection to CPU_FAN or AIO_PUMP header; Contact support if components are unresponsive. |
Especificacions tècniques
| Característica | Especificació |
|---|---|
| Número de model | ACFRE00180A |
| Dimensions del producte | 15.7" de llargada x 4.7" d'amplada x 2.9" d'alçada (398 mm x 119 mm x 74 mm) |
| Mètode de refrigeració | Líquid |
| Dispositius compatibles | CPU (AMD AM5/AM4, Intel LGA1851/1700) |
| Mida del radiador | 360mm (38mm thick) |
| Tipus de ventilador | 3 x ARCTIC P12 Pro 120mm Fans |
| Velocitat del ventilador | 400-3000 RPM (Max Rotational Speed) |
| Capacitat de cabal d'aire | 77 peus cúbics per minut (CFM) |
| Tipus de bomba | PWM Controlled |
| Ventilador VRM | Integrated, PWM Controlled |
| Tipus de connector d'alimentació | 4-pins |
| Voltage | 12 Volts |
| Wattage | 3.96 watts |
| UPC | 840033402927 |
Garantia i Suport
ARCTIC products are manufactured to the highest quality standards. For detailed warranty information, please refer to the official ARCTIC weblloc web o la targeta de garantia inclosa amb el producte.
For further assistance, technical support, or warranty claims, please contact ARCTIC customer service through their official website. You can also find the comprehensive user manual in PDF format aquí.
