1. Introducció
Image: The MiBOXER C3 CCT Color Temperature Remote Controller in black.
This user manual provides detailed instructions for the MiBOXER C3 CCT Color Temperature Remote Controller. The C3 remote is designed for precise control over color temperature (CCT) and brightness in single-zone lighting setups. It utilizes 2.4GHz wireless technology for reliable operation.
Si us plau, llegiu aquest manual detingudament abans d'utilitzar el producte per garantir-ne el funcionament correcte i maximitzar-ne la vida útil.
2. Característiques del producte
- Single-Zone Control: Dedicated for one-zone lighting setups.
- CCT & Brightness Adjustment: Fine-tune color temperature and brightness with ease.
- Tecnologia sense fil de 2.4 GHz: Ensures reliable, long-range connectivity.
- Disseny negre elegant: Modern, minimalist appearance.
- Interfície fàcil d'utilitzar: Simple layout for quick adjustments.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- MiBOXER C3 CCT Color Temperature Remote Controller (Black)
- Manual d'usuari
Image: The MiBOXER C3 remote control, its retail packaging, and the included user manual.
4. Configuració
4.1 Powering the Remote
The MiBOXER C3 remote does not require batteries. It is designed to operate without external power, likely drawing power from the connected lighting system or having an internal, non-replaceable power source.
4.2 Linking the Remote to a Light Fixture
To control a light fixture, the C3 remote must be linked. The linking process typically involves a sequence of actions on both the remote and the light fixture. Refer to your specific MiBOXER light fixture's manual for detailed linking instructions, as this process can vary.
General Linking Procedure (may vary):
- Ensure the light fixture is powered off.
- Power on the light fixture.
- Within 3 seconds of powering on the light, short press the "ON" button on the C3 remote 3 times.
- The light should flash 3 times slowly, indicating successful linking.
4.3 Unlinking the Remote from a Light Fixture
To unlink the remote from a light fixture, follow a similar procedure:
- Ensure the light fixture is powered off.
- Power on the light fixture.
- Within 3 seconds of powering on the light, short press the "ON" button on the C3 remote 5 times.
- The light should flash 10 times quickly, indicating successful unlinking.
5. Instruccions de funcionament
Imatge: Frontal view of the MiBOXER C3 remote control, highlighting the Brightness/CCT control slider and the ON/OFF buttons.
5.1 Encès/Apagat
- Per encendre la llum ON, premeu ON botó.
- Per encendre la llum OFF, premeu OFF botó.
5.2 Adjusting Brightness and Color Temperature (CCT)
The long vertical bar on the remote serves as the control for both brightness and color temperature.
- Control de brillantor: Slide your finger along the vertical bar to adjust the brightness level. Sliding towards the top (sun icon) increases brightness, and sliding towards the bottom (dim sun icon) decreases brightness.
- Color Temperature (CCT) Control: While the light is on, short press the ON button again to switch the function of the vertical bar to CCT adjustment. Slide your finger along the vertical bar to change the color temperature from warm white (yellow end) to cool white (blue end).
6. Manteniment
The MiBOXER C3 remote requires minimal maintenance.
- Neteja: Use a soft, dry cloth to wipe the surface of the remote. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.
- Emmagatzematge: Guardeu el comandament a distància en un lloc sec, allunyat de la llum solar directa i de temperatures extremes.
- Exposició a l'aigua: This device is not waterproof. Avoid exposing it to water or high humidity.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El comandament a distància no controla la llum. | Remote is not linked to the light fixture. | Follow the "Linking the Remote to a Light Fixture" instructions in Section 4.2. |
| Intermittent control or poor range. | Interference from other 2.4GHz devices; Obstructions between remote and light. | Reduce interference by moving other wireless devices; Ensure clear line of sight or reduce distance. |
| Brightness or CCT adjustment is not responsive. | Remote may be in an unresponsive state; Light fixture issue. | Try pressing ON/OFF buttons to reset; Check the light fixture's power supply. |
8. Especificacions
| Atribut | Valor |
|---|---|
| Model | C3 |
| Marca | MiBOXER |
| Color | Negre |
| Material | Plàstic |
| Tecnologia sense fils | 2.4 GHz |
| Zones de control | 1 Zona |
| Font d'alimentació | No batteries required (internal power) |
| Temperatura de funcionament | Fins a 40 °C (104 °F) |
| Pes de l'article | 2.08 unces (59 grams) |
| Dimensions del paquet | 5.63 x 1.69 x 0.75 polzades (14.3 x 4.3 x 1.9 cm) |
Image: Technical drawing illustrating the dimensions of the MiBOXER C3 remote control and its magnetic wall mount.
Image: Diagram showing the dimensions of the retail packaging for the MiBOXER C3 remote control.
9. Garantia i Suport
Specific warranty information for the MiBOXER C3 CCT Color Temperature Remote Controller is not provided in the product details. Please refer to the retailer or manufacturer's official weblloc web per conèixer els termes i condicions de la garantia.
For technical support or further assistance, please contact MiBOXER customer service through their official channels. Contact information can typically be found on the manufacturer's weblloc web o a l'embalatge del producte.
