AIDA Single Pole Motion Sensor Light Switch User Manual

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your AIDA Single Pole Motion Sensor Light Switch. This device is designed to enhance convenience and energy efficiency by automatically controlling lighting based on occupancy. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image: The AIDA Single Pole Motion Sensor Light Switch shown alongside its product packaging, highlighting its design and key features.

Informació important de seguretat

WARNING: RISK OF ELECTRIC SHOCK. Improper installation can be dangerous or illegal. Always consult a qualified electrician if you are unsure about any part of the installation process.

• Apagueu l'alimentació: Always disconnect power at the circuit breaker or fuse box before installing or servicing the switch.
• Cable neutre necessari: This device requires a neutral wire for proper operation. If your electrical box does not have a neutral wire, this switch is not compatible.
• Single Pole Only: This switch is designed for single-pole control only and is not suitable for 3-way or multiple-way circuits.
• UL/CUL Certified: The switch is UL and CUL listed, ensuring compliance with safety standards.
• Vol. Operatiutage: Ensure your electrical system operates at 120 Volts (AC).

Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• AIDA Single Pole Occupancy Motion Sensor Light Switch
• Placa de paret sense cargols
• Wire Nuts (Terminal caps)
• Cargols de muntatge
• Manual d'instruccions (aquest document)

Especificacions del producte

Image: A visual representation of the product dimensions and a detailed table of specifications for the AIDA motion sensor switch.

Image: A chart illustrating the universal compatibility of the AIDA motion sensor switch with various load types including LED/CFL, MLV, INV/HAL, Ballast, and Fan.

Configuració i instal·lació

Abans de començar:

1. Apagueu l'alimentació: Localitza el quadre de disjuntors i desconnecta l'alimentació del quadre de commutació on treballaràs. Verifica que l'alimentació estigui apagada utilitzant un voltimetre.tage provador.
2. Identificar els cables: Carefully remove the existing wall plate and switch. Identify the following wires:
   • Line Wire (Black): Carries power from the circuit breaker.
   • Load Wire (Black): Carries power to the light fixture.
   • Neutral Wire (White): Required for this switch.
   • Ground Wire (Green or Bare Copper): For safety.
3. Confirm Neutral Wire: This switch requires a neutral wire. If you do not have a neutral wire (typically white) in your electrical box, this switch is not compatible.

Instruccions de cablejat:

Follow the wiring diagram carefully. Use the provided wire nuts to secure connections.

Image: A detailed wiring diagram showing connections for the AIDA motion sensor light switch, including Line, Load, Neutral, and Ground wires. It explicitly states that a neutral wire is required and the switch is not suitable for 3-way or multiple-way circuits.

• Connecteu el VERD wire from the switch to your house's TERRA filferro.
• Connecteu el BLANC wire from the switch to your house's NEUTRE filferro.
• Connecteu el NEGRE wire from the switch to your house's LÍNIA filferro (calent).
• Connecteu el VERMELL wire from the switch to your house's CÀRREGA wire (to the light fixture).

Important: Ensure all connections are secure and insulated with wire nuts. This switch is for single-pole applications only. Do not use in 3-way or multi-way circuits.

Muntatge de l'interruptor:

1. Carefully fold the wires and push the switch into the electrical box.
2. Secure the switch to the electrical box using the provided screws.
3. Attach the screwless wall plate.
4. Resta l'alimentació al disjuntor.

Image: A diagram showing the precise dimensions of the AIDA motion sensor light switch, its mounting bracket, and the screwless wall plate for easy installation.

Operating Instructions and Customization

The AIDA motion sensor switch offers various modes and adjustable settings to suit your needs.

Modes de funcionament:

• Occupancy Mode (Auto-On/Auto-Off): Lights automatically turn ON when motion is detected and OFF after a set delay when no motion is detected. Ideal for high-traffic areas like bathrooms, laundry rooms, and kitchens.
• Vacancy Mode (Manual-On/Auto-Off): Lights must be manually turned ON, but will automatically turn OFF after a set delay when no motion is detected. Suitable for bedrooms or TV rooms where you prefer manual control for turning on lights.

Configuració ajustable:

The switch features internal dip switches for customizing settings. Carefully remove the faceplate to access these controls.

Imatge: Un primer pla view of the AIDA motion sensor switch's internal settings, showing dip switches for Adjustable Light Level (Timeout), PIR Sensitivity, and Ambient Light Sensor Mode.

• Adjustable Light Level (Timeout): This setting determines how long the light stays on after the last detected motion. Options typically include 30 seconds, 1 minute, 5 minutes, 15 minutes, or 30 minutes. Refer to the switch's internal labels for specific settings.
• Sensibilitat PIR: Adjusts the sensitivity of the Passive Infrared (PIR) sensor to detect motion. Settings range from Low (L) to High (H). A higher sensitivity detects smaller movements or movements at a greater distance.
• Ambient Light Sensor Mode: Controls how the switch reacts to ambient light.
  • Baix/Alt: The switch will only turn on lights if the ambient light level is below a certain threshold (e.g., only turn on at night).
  • Apagat: The ambient light sensor is disabled, and the switch will turn on lights regardless of ambient light.
  • Personalitzat: Allows for more specific ambient light level adjustments.

Note: After adjusting any internal settings, reattach the faceplate securely.

Imatge: Una imatge detallada view of the AIDA motion sensor switch with its cover removed, showing the dip switches for adjusting timeout, PIR sensitivity, and ambient light sensor mode.

Manteniment

The AIDA Motion Sensor Light Switch is designed for long-lasting, maintenance-free operation. To ensure optimal performance:

• Neteja: Periodically wipe the switch and wall plate with a soft, damp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o els components interns.
• Obstrucció: Ensure the sensor lens is not obstructed by furniture, decorations, or other objects, as this can impair motion detection.
• No hi ha peces reparables per l'usuari: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the unit beyond adjusting the dip switches.

Resolució de problemes

Garantia i assistència al client

AIDA products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official AIDA weblloc.

If you encounter any issues or have questions regarding your AIDA Single Pole Motion Sensor Light Switch, please contact our customer support team:

• Weblloc: Visit the AIDA Store on Amazon (per a informació general del producte)
• Correu electrònic: Consulteu l'embalatge del producte o la informació oficial weblloc web per al correu electrònic de contacte.
• Telèfon: Consulteu l'embalatge del producte o la informació oficial weblloc web per a un número de telèfon de contacte.

Please have your model number (B0DM4SGNBQ) and purchase date ready when contacting support.