Introducció
Thank you for choosing the Hbada E2 Ergonomic Office Chair. This manual provides detailed instructions for assembly, operation, and maintenance to ensure you get the most comfortable and healthy experience from your new chair. Please read this manual thoroughly before assembly and use.
Informació de seguretat
Always follow the instructions provided with the chair for proper assembly and use. Be cautious when adjusting the chair's position, especially when reclining, to avoid injury. Do not exceed the maximum weight capacity of the chair.
Contingut del paquet
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list for a complete overview.
- Chair Base with Wheels
- Cilindre d'elevació de gas
- Muntatge del seient
- Muntatge del respatller
- Reposacaps
- Reposabraços (esquerra i dreta)
- Footrest (if applicable to your model)
- Maquinari de muntatge (cargols, volanderes, clau Allen)
- Manual d'instruccions
Instruccions de muntatge
Assembly typically takes about 30 minutes and requires only the provided Allen wrench. Follow these steps carefully:
- Muntar la base de la cadira: Insert the wheels into each leg of the chair base. Ensure they are securely fitted.
Image: The chair base with its five legs and wheels, ready for assembly.
- Install the Gas Lift Cylinder: Insert the air pneumatic cylinder into the center hole of the assembled chair base.
- Attach the Footrest (if applicable): If your model includes a footrest, attach it to the underside of the seat assembly as per the specific instructions. The footrest is designed to slide out and fold for use.
- Attach the Armrests: Screw both armrests to the underside of the seat assembly. Ensure they are firmly secured.
Image: Close-up of the chair's underside, indicating where armrests are screwed into place.
- Fixeu el respatller: Screw the backrest support to the back of the seat assembly.
Image: The backrest assembly being connected to the seat, showing the screw points.
- Connect Seat and Base: Col·loqueu amb cura el seient i el respatller muntats sobre el cilindre d'elevació de gas, assegurant-vos que estigui centrat i estable.
- Install the Headrest: Slide the headrest onto the top of the backrest. It should click into place or be secured with a screw, depending on the design.
Image: The headrest component being installed onto the upper part of the chair's backrest.
Instruccions d'ús i ajustos
The Hbada E2 chair offers multiple adjustments for personalized comfort:
1. Ajust d'alçada del seient
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise the chair. Release the lever to lock the height.
2. Suport lumbar ajustable en 6 direccions
The backrest features a dynamic lumbar support system. This support can be adjusted in 6 ways:
- Forward and Backward Adjustment: 3 levels of depth adjustment.
- Ajust vertical: Move the lumbar support up or down to align with your lower back curve.
- Left-Right Suspension: The floating structure adapts to your movements, providing continuous support.
Image: A detailed diagram showing the 6-way adjustable lumbar support, highlighting its 2.36" up & down, 1.97" front & back, and 10° left & right movement capabilities.
3. Reposabraços ajustables en 3D
The armrests provide versatile support and can be adjusted in three dimensions:
- Ajust d'alçada: Up to 7.5 cm (2.95 inches) vertically.
- Forward and Backward Adjustment: Up to 5 cm (1.97 inches) horizontally.
- Rotació: Rotate 40 degrees left and right.
Image: A visual guide to the 3D ergonomic armrests, detailing 2.95" up & down, 1.97" front & back, and 40° left & right rotation.
4. 3D Adjustable Headrest and Reclining Function
The headrest and reclining function work together to provide full-body support:
- Ajust del reposacaps: Adjust vertically up to 10 cm (3.93 inches), forward and backward up to 3 cm (1.57 inches), and rotate 60 degrees to support your neck.
- Funció reclinable: The chair reclines up to 135 degrees with three lockable tilt angles (90°, 115°, 138°). Use the wire-controlled adjustment for one-touch operation without bending down.
Image: A diagram showing the 3D adjustable headrest, indicating 3.93" up & down movement and 60° rotation.
Image: Three illustrations demonstrating the chair's 3-level locking recline feature: 90° for comfortable office work, 115° for leisure, and 138° for short naps.
Imatge: Un primer pla view of the aluminum alloy wire-controlled adjustment mechanism, designed for easy one-touch operation.
Manteniment
Regular maintenance helps prolong the life and appearance of your Hbada E2 chair:
- Cleaning Mesh Fabric: The breathable mesh fabric can be cleaned with a damp drap i sabó suau. Eviteu els productes químics durs.
- Neteja del marc: Wipe the alloy steel frame and plastic components with a soft, damp tela.
- Manteniment de rodes: Periodically check the wheels for hair or debris and clean as needed to ensure smooth movement.
- Apretar els elements de fixació: Every few months, check all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability.
Imatge: Una imatge ampliada view of the Flexmono Dragon Weave Mesh seat cushion, emphasizing its breathable structure for improved air permeability.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La cadira no ajusta l'alçada | Mal funcionament del cilindre d'elevació de gas o palanca no accionada. | Ensure the height adjustment lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement. Contact customer support. |
| La cadira trontolla o se sent inestable | Cargols solts o terra irregular. | Revisa i estreny tots els cargols de muntatge. Assegura't que la cadira estigui sobre una superfície plana i uniforme. |
| Armrests are loose | Els cargols de muntatge estan solts. | Tighten the screws securing the armrests to the seat. |
| El respatller no es reclina ni es bloqueja | Recline mechanism is jammed or not engaged. | Ensure the recline lock lever is disengaged to recline. If it doesn't lock, check for obstructions or contact support. |
Especificacions
- Marca: Hbada
- Model: E2
- Color: Negre
- Dimensions del producte: 30.51 "P x 22.24" W x 18.11" H
- Estil d'esquena: Malla
- Interval d'edat (descripció): Adult
- Estil de braç: Padded, 3D Adjustable
- Material de farciment: Malla
- Material: Alloy Steel (Frame), Mesh (Seat/Back)
- Recompte de posicions reclinables: 3 (fins a 135 graus)
- Inclinació: Sí
- Factor de forma: Cadira d'oficina
Garantia i Suport
Hbada is committed to providing high-quality products and customer satisfaction. Your Hbada E2 Ergonomic Office Chair comes with comprehensive support:
- Substitució de peces: Parts are replaced, not repaired, for covered issues.
- Política de devolució de 30 dies: Enjoy a 30-day return period without specific reasons required.
- Danyat a l'arribada: Repair and replacement are guaranteed for items damaged during shipping.
- Atenció al client: For any questions, issues, or warranty claims, please visit the official Hbada store or contact their customer support directly.
Per a més informació, visiteu el Botiga Hbada a Amazon.