1. Introducció
The Gedsffati HD05 is a versatile combustible gas detector designed for home use. It continuously monitors for leaks of various combustible gases, including natural gas, liquefied petroleum gas (LPG), methane (CH4), ethane (C2H6), propane (C3H8), and butane (C4H10). Equipped with high-precision sensors, a clear LCD screen, and an audible alarm, it provides real-time detection and enhances household safety. This device also features integrated temperature and humidity sensors for additional environmental monitoring.
The HD05 operates by plugging into a standard AC power outlet and includes a rechargeable battery for continuous operation. Its compact design and intuitive interface make it an essential tool for preventing potential gas-related hazards.
2. Configuració i instal·lació
2.1 Desembalatge i inspecció inicial
En obrir el paquet, assegureu-vos que hi hagi tots els components:
- Gedsffati HD05 Gas Detector x1
- Manual d'usuari x1
Inspect the device for any visible damage before proceeding with installation.
2.2 Connexió d'alimentació
The Gedsffati HD05 is designed for plug-in operation. Simply connect the device to a standard AC 100-240V/50-60Hz power outlet. The device will begin functioning immediately upon connection.
Image: The Gedsffati HD05 Gas Detector plugged into a wall outlet, showing its display with gas concentration bars, temperature, and humidity readings.
2.3 Preheating Phase
After plugging in, the device enters a preheating phase. During this time, the sensors stabilize. The device will indicate when it is ready for normal operation. No action is required during preheating.
2.4 Optimal Installation Position
The installation position is crucial for accurate gas detection, as different gases have different densities relative to air.
- For Natural Gas (Methane - CH4): Methane is lighter than air. Install the detector 12-20 inches (approximately 30-50 cm) from the ceiling.
- For LPG (Propane - C3H8, Butane - C4H10): LPG is heavier than air. Install the detector 12-20 inches (approximately 30-50 cm) from the floor.
Ensure the device is placed in an area where gas leaks are most likely to occur, such as near gas appliances (stoves, water heaters) or gas lines. Avoid placing it directly above heat sources, in direct sunlight, or in areas with high humidity or strong air currents.
Video: General installation instructions for a gas detector, demonstrating how to mount it on a wall using screws and connect power. (Source: WideReach)
3. Instruccions de funcionament
3.1 Mostra finalview
The device features a 2.1-inch high-resolution color LCD screen that displays real-time measurements for gas concentration, temperature, and air humidity. It also shows battery status and alarm indicators.
Imatge: Una imatge detallada view of the Gedsffati HD05's color LCD screen, highlighting its ability to display multiple environmental parameters simultaneously.
3.2 Funcions dels botons
The device has three main buttons: H, O, and D.
- Botó H: Short press to adjust screen brightness.
- Botó O: Short press to perform a self-test. Long press to change the temperature unit (Celsius/Fahrenheit).
- Botó D: Short press to activate or deactivate the audible alarm (buzzer).
Image: The device illustrating its intelligent power indicator light. A green light indicates normal operation, while a red light signals a mute error or sensor malfunction. The 'O' button is shown for self-testing.
3.3 Funcions d'alarma
The device provides both audible and visual alarms based on combustible gas concentration:
- No Combustible Gas: No audible alarm, green gas icon flashes.
- Baixa concentració: Device emits an audible alarm every 3 minutes, yellow gas icon flashes.
- Medium Concentration: Device emits an audible alarm every 3 minutes, orange gas icon flashes.
- High Concentration: Device emits a continuous audible alarm, red gas icon flashes.
Image: The Gedsffati HD05 in an alarm state, showing visual indicators and sound waves, signifying a gas leak detection.
Video: Demonstration of a plug-in gas detector's alarm functionality and display features. (Source: Moes House)
3.4 Rotació de la pantalla
The device supports screen rotation for flexible installation. If the device is plugged into an outlet that requires it to be oriented differently, the screen display can be rotated to maintain readability.
4. Manteniment
The Gedsffati HD05 is designed for high performance and a long lifespan of approximately 5 years for its sensors. Minimal maintenance is required to ensure optimal operation:
- Neteja: Regularly wipe the device with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Autocomprovació: Perform the self-test function (short press 'O' button) periodically to confirm the device is functioning correctly.
- Eviteu les obstruccions: Ensure the gas inlet vents are not obstructed by furniture, curtains, or other objects.
5. Solució De Problemes
If you encounter issues with your Gedsffati HD05, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén | No power from outlet; device malfunction | Check power outlet with another appliance. Ensure the device is properly plugged in. If issues persist, contact support. |
| Alarm sounds frequently without gas presence | False alarm due to strong odors (e.g., cleaning products, aerosols); sensor sensitivity | Ventilate the area. Relocate the detector away from sources of strong odors. Perform a self-test. |
| La pantalla està en blanc o il·legible | Low brightness; device malfunction | Short press the 'H' button to adjust brightness. If the screen remains blank, contact support. |
| Self-test fails or red light indicates error | Sensor malfunction; internal error | Unplug and re-plug the device. If the error persists, contact support. |
Video: A demonstration on how to test if a gas detector is working correctly. (Source: WideReach)
6. Especificacions
| Característica | Detall |
|---|---|
| Número de model | HD05 |
| Gasos Combustibles Detectables | Natural gas, LPG, Methane (CH4), Ethane (C2H6), Propane (C3H8), Butane (C4H10), etc. |
| Interval de mesura de temperatura | -10℃ to 50℃ / 14°F to 122°F (±3%) |
| Air Humidity Measurement Range | 5% - 95% RH (±5%) |
| Sensor Detection Frequency | Un cop cada 2 segons |
| Font d'alimentació | AC 100-240V/50-60Hz |
| Voltage i Actual | 5V/1A |
| Entorn de treball | -10℃ to 60℃ / 14°F to 140°F, 20% to 80% RH |
| Dimensions del producte | 85 x 51 x 33 mm |
| Pes del producte | 60 g |
| Material | Plàstic ABS |
| Bateria | 1 bateria de polímer de liti (inclosa) |
7. Informació de la garantia
Specific warranty details for the Gedsffati HD05 Combustible Gas Detector are not provided in the product information. Please refer to your purchase documentation or contact the retailer for warranty terms and conditions.
8. Atenció al client
For technical assistance, troubleshooting, or any inquiries regarding your Gedsffati HD05 Combustible Gas Detector, please contact the seller or manufacturer through the platform where the product was purchased. Contact information for direct support is not available in the provided product details.
