Cisco IE-3400-8T2S-E Catalyst IE3400 Rugged Series Network Essential Switch User Manual

1. Introducció

This manual provides essential information for the installation, operation, and maintenance of the Cisco IE-3400-8T2S-E Catalyst IE3400 Rugged Series Network Essential Switch. This device is designed for industrial environments, offering robust network connectivity. Please read this manual thoroughly before operating the device.

2. Informació de seguretat

Observeu les següents precaucions de seguretat per evitar lesions i danys a l'equip:

• Assegureu-vos de posar a terra correctament el dispositiu.
• Desconnecteu l'alimentació abans de realitzar qualsevol procediment de manteniment o instal·lació.
• Operate the switch within the specified environmental conditions (temperature, humidity).
• Només personal qualificat ha d'instal·lar i mantenir aquest equip.
• Eviteu exposar el dispositiu a la humitat o a temperatures extremes.

3. Contingut del paquet

Comproveu que el vostre paquet contingui els elements següents:

• Cisco IE-3400-8T2S-E Catalyst IE3400 Rugged Series Network Essential Switch
• Documentació (Guia d'inici ràpid, Informació de seguretat)
• Mounting hardware (if included with specific model variant)
• Power connector terminal blocks

If any items are missing or damaged, contact your supplier immediately.

4. Sobrecàrrega físicaview

The following diagram illustrates the front panel components of the Cisco IE-3400-8T2S-E switch.

Figura 1: Front Panel Layout of the Cisco IE-3400-8T2S-E Switch

4.1. Front Panel Components Description

• USB Ports (1, 2): Two USB ports for connecting external devices or for configuration.
• Port de la consola: An RJ45 console port for local management and initial configuration.
• SFP 1G Ports (1/1, 1/2): Two Small Form-Factor Pluggable (SFP) ports supporting 1 Gigabit Ethernet for fiber optic connections.
• 1G Ethernet Ports (1/3 - 1/10): Eight 1 Gigabit Ethernet RJ45 ports for standard network connections.
• DC Power Inputs (DC-A, DC-R): Redundant DC power input terminals, supporting a voltage range of ±12-48V at 5.0A.
• Cargol de presa de terra: Terminal for connecting the chassis to earth ground.
• Ranura per a targeta SD: Slot for an SD card, typically used for configuration backup or software storage.
• Alarm/Relay Ports (1/9, 1/10): Terminals for connecting external alarm systems or relay controls.
• Indicadors LED: Various LEDs indicating power status (DC A/B), system status, link/activity for ports, and alarm status.

5. Configuració

5.1. Muntatge de l'interruptor

The IE3400 series switches are designed for industrial environments and typically support DIN rail or wall mounting. Refer to the specific mounting instructions provided with your mounting kit for detailed steps.

5.2. Potència de connexió

1. Assegureu-vos que la font d'alimentació estigui apagada abans de connectar.
2. Connect the DC power cables to the DC-A and/or DC-R terminal blocks, observing polarity (+ and -). The switch supports redundant power inputs.
3. Connect the grounding wire to the grounding screw on the front panel.
4. Once all connections are secure, apply power to the switch. The DC-A and/or DC-B LEDs should illuminate.

5.3. Connexions de xarxa

• Ports Ethernet: Connect standard RJ45 Ethernet cables from your network devices to the 1G Ethernet ports (1/3 - 1/10).
• Ports SFP: Insert compatible SFP transceivers into the SFP 1G ports (1/1, 1/2) and connect fiber optic cables as required.
• Port de la consola: For initial configuration, connect a console cable from your management workstation to the RJ45 console port.

6. Instruccions de funcionament

6.1. Engegada inicial

Upon applying power, the switch will perform a power-on self-test (POST). The system LED will indicate the boot status. Once the boot process is complete, the switch will be ready for configuration.

6.2. Configuration Access

The switch can be configured via the console port using a terminal emulator or remotely via Telnet/SSH once an IP address is assigned. Refer to the Cisco IOS documentation for detailed configuration commands and procedures.

6.3. Indicadors LED

Monitor the LED indicators on the front panel to understand the switch's operational status:

• DC-A/DC-B LEDs: Indicate the status of the primary and redundant DC power inputs.
• LED del sistema: Indicates the overall operational status of the switch (e.g., green for normal operation, amber for warning, red for fault).
• LED d'enllaç/activitat (per port): Indicate network link status and data activity on each Ethernet and SFP port.
• LED d'alarma: Illuminates when a critical system alarm is triggered.

7. Manteniment

7.1. Neteja

Netegeu periòdicament l'exterior de l'interruptor amb un drap suau i sec. No utilitzeu netejadors líquids ni en aerosol. Assegureu-vos que les obertures de ventilació estiguin lliures de pols i deixalles.

7.2. Actualitzacions de firmware

Regularly check the Cisco support website for the latest firmware updates. Applying updates can improve performance, add features, and address security vulnerabilities. Follow Cisco's official procedures for firmware upgrades.

7.3. Consideracions ambientals

Ensure the switch operates within its specified temperature and humidity ranges. Proper airflow around the device is crucial for heat dissipation.

8. Solució De Problemes

Aquesta secció proporciona els passos bàsics per a la resolució de problemes comuns.

8.1. Sense poder

• Verify that the power source is active and the power cables are securely connected to the DC-A/DC-R terminals.
• Check the DC-A/DC-B LEDs. If they are off, there is no power or a power supply issue.

8.2. No Network Link

• Ensure Ethernet or fiber optic cables are properly connected to both the switch port and the connected device.
• Check the Link/Activity LED for the specific port. If it is off, there is no link.
• Verify that the connected device is powered on and functioning correctly.

8.3. System Alarm

• If the Alarm LED is illuminated, consult the Cisco IOS documentation for specific alarm codes and their meanings.
• Check system logs via the console or network management interface for detailed error messages.

9. Especificacions

10. Garantia i Suport

This product is offered as an Amazon Renewed item. Warranty and return policies are typically managed by the reseller (Amazon Renewed) for a specified period. Please refer to your purchase documentation or contact Amazon Renewed support for details regarding your specific warranty coverage.

For technical documentation, software downloads, and advanced support for the Cisco IE-3400-8T2S-E switch, please visit the official Cisco support website and search for your specific model.