Beatbot AquaSense 2 Ultra Cordless Robotic Pool Cleaner

Introducció

The Beatbot AquaSense 2 Ultra is an advanced cordless robotic pool cleaner designed to provide comprehensive and efficient cleaning for complex pools. Utilizing HybridSense AI Mapping with an integrated camera, it offers precise navigation, obstacle detection, and full coverage. This innovative cleaner features a 5-in-1 cleaning system, addressing the floor, walls, waterline, water surface, and water clarification, eliminating the need for multiple devices. Its smart surface parking and auto water release functions ensure effortless retrieval. This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your AquaSense 2 Ultra to ensure optimal performance and longevity.

Image: The Beatbot AquaSense 2 Ultra robotic pool cleaner on its charging dock, showcasing its sleek design and integrated app interface.

Informació important de seguretat

ADVERTÈNCIA: Mantenir fora de l'abast dels nens.

• Always read and understand all instructions before using the appliance.
• No feu servir el netejador si el cable d'alimentació o l'endoll estan danyats.
• Assegureu-vos que la base de càrrega estigui col·locada en un lloc sec i ombrívol, allunyat de la llum solar directa i de l'aigua.
• Do not allow children to play with the pool cleaner.
• Only use accessories and spare parts supplied or recommended by Beatbot.
• Disconnect the cleaner from the charging dock before performing any maintenance or cleaning.
• The pool pump should be turned off when the robotic cleaner is in operation to ensure optimal performance and prevent interference with the cleaner's sensors.

Què s'inclou

Your Beatbot AquaSense 2 Ultra package includes the following components:

• Beatbot AquaSense 2 Ultra Robotic Pool Cleaner Unit
• Charging Dock with Power Adapter
• Rear Stabilizers (for charging station)
• Side Brushes (2 pre-installed, 2 extra)
• Water Clarifying Cartridge (1 included)
• Filter Baskets (Dual-layer, pre-installed)
• Pole Hook (for retrieval)
• Bossa d'emmagatzematge
• Manual d'usuari (aquest document)
• Small Screwdriver and extra screws (for maintenance)

Configuració

1. Desembalatge i inspecció inicial: Traieu amb cura tots els components de l'embalatge. Inspeccioneu-los per detectar qualsevol signe de dany.
2. Attach Rear Stabilizers: Securely attach the rear stabilizers to the charging station. These provide stability for the dock.
3. Instal·leu els raspalls laterals: If not already attached, install the two side brushes onto the cleaner. Ensure the end with the smaller tab is inserted first into the slot on the wheel, then press the larger tab end into place.
4. Install Water Clarifying Cartridge: Locate the designated slot for the water clarifying cartridge and insert it firmly. This cartridge helps bind fine particles for clearer water.
5. Carregueu la unitat: Place the robotic cleaner onto the charging dock. Connect the power adapter to the dock and plug it into a suitable power outlet. The green charging light will fade on and off during charging. A full charge typically takes approximately 4 hours. All charging lights will turn off when charging is complete.
6. Instal·lació i connexió de l'aplicació:
   • Scan the QR code provided in the manual or on the cleaner itself to download the Beatbot app.
   • Follow the in-app instructions to register an account and connect your AquaSense 2 Ultra to the app via 2.4G/5G Wi-Fi or Bluetooth. This enables advanced features and remote control.

Instruccions de funcionament

Inici d'un cicle de neteja:

1. Encès: Press the power button on the cleaner's control panel.
2. Seleccioneu el mode de neteja: Choose your desired cleaning mode using the buttons on the control panel or via the Beatbot app:
   • Mode pis: Només neteja el terra de la piscina.
   • Mode estàndard: Neteja el fons, les parets i la línia de flotació de la piscina.
   • Mode professional: Provides comprehensive cleaning of the floor, walls, waterline, and water surface.
   • Mode personalitzat: Design and select specific cleaning areas and durations through the app.
3. Col·locació: Place the cleaner on a level surface for 5 seconds to allow for calibration, then gently submerge it into the pool. The cleaner will automatically begin its cycle.

Key Features During Operation:

• HybridSense AI Mapping: The cleaner uses an AI camera and multiple sensors to map your pool, detect obstacles, and optimize its cleaning path for thorough coverage.
  

  Image: The Beatbot app displaying the pool map and the cleaner's active cleaning path, demonstrating its AI mapping capabilities.

• Sistema de neteja 5 en 1: The AquaSense 2 Ultra is designed to clean the floor, walls, waterline, water surface, and clarify water.
  

  Image: Visual representation of the Beatbot AquaSense 2 Ultra performing its 5-in-1 cleaning functions: walls, water surface, waterline, floor, and water clarification.
• Elevated Platform Cleaning: Adapts to clean multi-level pools with a minimum depth of 13.7 inches (35 cm).
  

  Image: The robotic cleaner demonstrating its ability to navigate and clean elevated platforms within a multi-level pool.

• Smart Surface Parking & Auto Water Release: Upon completion of a cleaning cycle or when the battery is low, the cleaner will automatically return to the surface and park itself near the pool edge. It will also automatically drain water to reduce weight for easier retrieval.
  

  Image: The Beatbot AquaSense 2 Ultra automatically returning to the pool surface and releasing water for effortless retrieval.

• Water Clarification: The integrated ClearWater technology uses a natural, eco-safe clarifier to bind fine particles, resulting in crystal-clear water.
  

  Image: The Beatbot AquaSense 2 Ultra actively clarifying pool water, showing the release of the clarifying agent.
• App Control (Surface Navigation): The Beatbot app allows for precise remote navigation and speed boost control specifically for surface cleaning. Note: App control is primarily for surface cleaning, not underwater cleaning.
  

  Image: A smartphone screen displaying the Beatbot app interface for remote control of the cleaner's surface navigation.

Manteniment

Cleaning the Filter Baskets:

After each cleaning cycle, it is crucial to clean the filter baskets to maintain optimal suction and cleaning performance. The AquaSense 2 Ultra features a dual-layer filtration system designed to capture debris of various sizes.

1. Remove from Pool: Once the cleaner has parked at the surface and drained, carefully lift it out of the pool using the large grip handle.
2. Access Filter Baskets: Open the designated compartment to access the dual filter baskets.
3. Deixalles buides: Remove the baskets and empty any collected debris into a waste bin.
4. Rinse Baskets: Rinse the filter baskets thoroughly with a garden hose to remove fine particles and residue. Ensure both layers of the filter are clean.
5. Torneu a instal·lar: Place the clean filter baskets back into the cleaner and close the compartment securely.

Image: A user demonstrating the easy removal and rinsing of the dual-layer filter basket for efficient debris capture.

Cura general i emmagatzematge:

• After each use, wipe down the exterior of the cleaner with a soft cloth to remove any pool chemicals or residue.
• Store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage bag for protection.
• Ensure the charging dock is also stored in a dry, protected area.
• Periodically check the brushes and wheels for any entangled debris or wear. Clean as necessary.

Resolució de problemes

Especificacions

Image: The Beatbot AquaSense 2 Ultra showcasing its robust construction and automotive-grade UV resistance for long-lasting outdoor performance.

Garantia i Suport

Informació de la garantia:

The Beatbot AquaSense 2 Ultra comes with a 3-Year Full Replacement GuaranteeAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

Atenció al client:

For any questions, technical assistance, or warranty claims, please contact Beatbot Customer Support. Contact information is typically available on the product packaging, the Beatbot website, or within the Beatbot mobile application.

You can also refer to the official Beatbot store on Amazon for additional resources and FAQs: Beatbot Amazon Store