Informació important de seguretat
Si us plau, llegiu i comprengui totes les instruccions i els avisos de seguretat abans del muntatge i l'ús d'aquest producte. Si no segueix aquestes instruccions, pot patir lesions o danys al producte.
- Do not attempt to lift or move the box spring when it is fully assembled.
- Seguiu sempre atentament les instruccions de muntatge per evitar inestabilitat o col·lapse.
- Be cautious of sharp edges and the folding design during assembly and use.
- Regularly inspect the box spring for any signs of wear or damage.
- No supereu la capacitat màxima de pes de 3500 lliures.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar el muntatge.
- Box Spring Frame Components
- Funda de tela
- Manual d'instal·lació
- Cargols
- Clau anglesa
Muntatge i muntatge
The MAF King Size Box Spring features a foldable design for easier setup. It is recommended that two adults assemble this product.
Eines necessàries:
- Included Wrench
- (Optional) Power screwdriver for faster assembly
Passos de muntatge:
- Desempaquetar components: Traieu amb cura totes les peces de l'embalatge i col·loqueu-les sobre una superfície neta i plana. Assegureu-vos que hi hagi tots els components enumerats.
- Desplega el marc: The box spring frame comes in a folded configuration. Gently unfold the sections as shown in the diagram below. Ensure the triangular support designs lock into place.
- Connexions segures: Align the frame sections and secure them using the provided screws and wrench. Ensure all connections are tightened securely to prevent wobbling or noise.
- Instal·lar llistons: Place the metal slats into their designated positions on the frame. The U-shaped groove design helps secure each pole and support frame.
- Aplicar la coberta de tela: Once the frame is fully assembled and stable, carefully place the removable fabric cover over the box spring. The cover is designed for easy application and removal.
Figure 1: Assembly Steps for the MAF Box Spring.
Figure 2: Foldable Design and Easy Assembly Overview.
Figure 3: Key Structural Features: Round Corners, Triangular Support, and U-Shaped Grooves.
Instruccions de funcionament
The MAF Box Spring is designed to provide stable support for your mattress. It can be used with various mattress types, including innerspring, memory foam, and latex mattresses.
- Col·locació: Position the assembled box spring on a compatible bed frame or directly on the floor if desired. Ensure it is level and stable.
- Col·locació del matalàs: Carefully place your mattress on top of the box spring. The box spring is designed to support mattresses up to 80"L x 76"W.
- Capacitat de pes: The box spring is engineered to support up to 3500 lbs. Do not exceed this weight limit to maintain structural integrity and safety.
- Reducció de soroll: The U-shaped groove design and seamless welding are intended to prevent structural distortion and squeaks, providing a quiet sleeping environment.
Figure 4: Proper Layering of Bed Components.
Manteniment i cura
Proper maintenance ensures the longevity and performance of your MAF Box Spring.
- Neteja de la coberta: The fabric cover is removable and washable. Remove it from the frame for cleaning as needed. Follow care instructions on the cover label if available, or wash with mild detergent and cold water, then air dry.
- Neteja del marc: Netegeu el marc metàl·lic amb un drap sec per eliminar la pols i les restes. Eviteu utilitzar productes químics agressius o netejadors abrasius.
- Inspecció periòdica: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Inspect the frame for any signs of bending, cracks, or damage.
- Moving the Box Spring: If you need to move the box spring, it is recommended to disassemble it first, especially if moving through narrow doorways or stairs, to prevent damage to the product or injury.
Resolució de problemes
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Soroll de grinyol | Connexions fluixes o col·locació desigual. | Ensure all screws are tightly secured. Verify the box spring is placed on a flat, level surface. The U-shaped groove design is intended to minimize noise; if squeaking persists, re-check assembly. |
| Inestabilitat/Troballament | Incomplete assembly or damaged components. | Re-check all assembly steps, ensuring triangular supports are engaged and all fasteners are tight. Inspect for any bent or damaged parts. |
| Enfonsament del matalàs | Exceeded weight capacity or improper mattress support. | Ensure the combined weight of users and mattress does not exceed 3500 lbs. Verify the mattress is compatible with a box spring. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | MAF |
| Número de model | MAF-MT33-10K |
| Mida | Rei |
| Dimensions del producte | 78.8 cm de llargada x 75.5 cm d'amplada x 10 cm d'alçada |
| Mida de matalàs compatible | 80" de llargada x 76" d'amplada |
| Característica especial | Foldable Design, Round Corner Design, Triangular Support, U-Shaped Groove Design |
| Tipus d'acabat | Recobert de pols |
| Components inclosos | Box Spring Frame, Fabric Cover, Installation Manual, Screws, Wrench |
| Instruccions de cura del producte | Wipe with Dry Cloth, Removable and Washable Fabric Cover |
| Muntatge obligatori | Sí |
| Distància de terra a l'element | 10 polzades |
| Pes de l'article | 49.1 lliures |
| Capacitat màxima de pes | 3500 lliures |
Figure 5: MAF Box Spring Size Chart.
Garantia i Suport
Specific warranty details for the MAF Box Spring are not provided within this manual. For warranty information, please refer to the product packaging or contact MAF customer support directly.
For further assistance, questions, or to report any issues, please visit the official MAF store or contact their customer service department.
