Manual d'usuari del pulsioxímetre de dit Wellue Model 60FB

1. Informació important de seguretat

This device is intended for sports and aviation use only. It is not a medical device and is not intended for medical diagnosis or treatment.

• Do not apply the oximeter to the same location for longer than 2 hours.
• If any abnormal condition is observed, change the position of the oximeter.
• Keep the device away from dust, vibration, corrosive substances, explosive materials, high temperature, and moisture.
• Avoid using the oximeter in an environment with strong electromagnetic interference.
• The device is not suitable for continuous monitoring during sleep.

2. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Wellue Fingertip Pulse Oximeter (Model 60FB)
• Corda
• 2 x piles AAA
• Manual d'usuari (aquest document)
• Bossa de transport

Image: Package contents showing the oximeter, lanyard, batteries, and user manual.

3. Producte acabatview

The Wellue Fingertip Pulse Oximeter is designed to measure blood oxygen saturation (SpO2) and pulse rate (PR) non-invasively. It features an OLED screen for clear display and a built-in memory function.

Image: Labeled diagram of the Wellue Pulse Oximeter components.

Característiques principals:

• Accurate & Reliable: Provides Plethysmograph waveform and Perfusion Index (PI) for reading accuracy assessment.
• Memòria integrada: Stores up to 12 sets of SpO2 and Pulse Rate data.
• Spot Check Mode: Analyzes SpO2 and pulse rhythm over 30 seconds.
• Audible & Visual Reminders: Alerts when SpO2 or Pulse Rate values exceed preset limits.
• Encès/apagat automàtic: Automatically powers on when a finger is inserted and off when removed.
• Pantalla OLED: Clear display of readings.

4. Configuració

4.1 Instal·lació de la bateria

The device requires two AAA batteries for operation. Ensure correct polarity during installation.

1. Obriu la tapa de la bateria situada a la part posterior del dispositiu.
2. Insert two AAA batteries according to the polarity indicators (+/-) inside the compartment.
3. Tanqueu la tapa de la bateria amb seguretat.

Nota: Traieu les piles si no heu d'utilitzar el dispositiu durant un període prolongat per evitar fuites.

5. Instruccions de funcionament

5.1 Encès i apagat

• Encès: Insert a finger into the oximeter. The device will automatically power on within 8 seconds and begin measurement.
• Apagar: Remove your finger from the oximeter. The device will automatically power off within 3 seconds.

Image: Auto power on and off mechanism.

5.2 Prendre una mesura

1. Ensure the oximeter has sufficient battery power.
2. Open the clip and place one of your fingers (preferably the index finger) into the rubber opening of the oximeter. Ensure the finger is fully inserted and resting flat.
3. Release the clip. The oximeter will automatically turn on and begin measuring.
4. Keep your hand still during measurement. Readings for SpO2, Pulse Rate (PR), and Perfusion Index (PI) will be displayed on the OLED screen. A plethysmograph waveform will also be shown.
5. Once readings stabilize, you can record the values.

5.3 Modes de mesura

• Spot Check Mode: After approximately 30 seconds of measurement, the device will display the SpO2 and pulse rhythm analysis result. This mode provides a quick, average reading.
• Seguiment continu: The device continuously displays real-time SpO2, PR, and PI values. Note: The device is not recommended for continuous use at night.

Image: Spot Check Mode display and analysis.

5.4 Built-in Memory

The oximeter can store up to 12 sets of SpO2 and Pulse Rate data. To view historical data:

• When the device is off, press the main button to recall the last 12 records.
• The records will be displayed sequentially.

Image: Built-in memory display showing stored SpO2 and Pulse Rate data.

5.5 Audible and Visual Reminders (Alarms)

The device features audible beeps and flashing values on the screen if your SpO2 or Pulse Rate exceeds or falls below preset limits.

Image: Audible reminder in action.

5.6 Configuració del menú

Per accedir al menú de configuració:

• While measuring, long-press the main button to enter the setup menu.
• In the menu, you can adjust parameters such as SpO2 alarm limits (SpO2 alm Lo, SpO2 alm Hi) and Pulse Rate alarm limits (PR alm Lo, PR alm Hi).
• You can also toggle the beep reminder on or off.
• Short-press the button to cycle through options, long-press to confirm or exit.

Image: Menu setup options for alarm limits and beep settings.

6. Manteniment i cura

• Neteja: Netegeu la superfície de l'oxímetre amb un drap suauampened with 70% isopropyl alcohol. Do not immerse the device in liquid.
• Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Substitució de la bateria: Replace batteries when the low battery indicator appears on the screen.
• Eliminació: Dispose of the device and its components according to local regulations for electronic waste.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Wellue weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

Informació de contacte:

• Marca: Wellue
• Weblloc: www.wellue.com