RUBI DT-10IN MAX Extendable Table Instruction Manual for DT-250 MAX Tile Saw

1. Introducció

The RUBI DT-10IN MAX Extendable Table is designed to provide additional workspace and support when cutting large-format tiles with the RUBI DT-250 MAX tile saw. This accessory enhances cutting precision and efficiency by offering a stable, extended surface for material handling.

Constructed from reinforced extruded aluminum with a protective rubber-coated top, the table ensures both durability and material safety. Its integrated extendable legs provide crucial stability, preventing movement during operation.

2. Informació de seguretat

WARNING: Always read and understand all safety instructions before operating this product or any associated equipment. Failure to follow these instructions may result in serious injury or property damage.

Ensure the DT-10IN MAX Extendable Table is securely attached to the DT-250 MAX tile saw and its legs are fully extended and stable before placing any material on it.
Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and gloves, when operating the tile saw and handling tiles.
Do not exceed the maximum weight capacity of the extension table. Refer to the DT-250 MAX manual for overall system limitations.
Mantenir la zona de treball neta i ben il·luminada. Les zones desordenades o fosques conviden a accidents.
Keep children and bystanders away while operating the tile saw and extension table.
Inspect the extension table for any damage before each use. Do not use if damaged.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents i no estiguin danyats en desempaquetar-los:

RUBI DT-10IN MAX Extendable Table
Stability Legs (2 units)
Manual d'instruccions (aquest document)

4. Configuració i instal·lació

This section details the steps for attaching the DT-10IN MAX Extendable Table to your RUBI DT-250 MAX tile saw.

4.1 Attaching the Extendable Table

Prepare the Tile Saw: Ensure your RUBI DT-250 MAX tile saw is powered off and disconnected from the power source. Position the saw on a stable, level surface.

Image 4.1.1: The RUBI DT-250 MAX tile saw with the DT-10IN MAX extension table installed.
Position the Extension Table: Align the connection points of the DT-10IN MAX Extendable Table with the corresponding slots on the side of the DT-250 MAX tile saw's work surface. The extension table is designed to seamlessly integrate with the saw's existing structure.
Image 4.1.2: Proper alignment of the extension table during installation.
Secure the Table: Gently slide the extension table into place until it clicks or locks securely. Ensure there is no play or instability in the connection. Refer to your DT-250 MAX manual for specific locking mechanisms if necessary.
Image 4.1.3: The DT-10IN MAX extension table, showing its design for secure attachment.

4.2 Installing the Stability Legs

Locate Leg Attachment Points: Identify the designated attachment points on the underside of the DT-10IN MAX Extendable Table or the main saw stand where the stability legs are to be installed.
Image 4.2.1: The stability legs provided with the DT-10IN MAX.
Col·loca les cames: Insert the stability legs into their respective attachment points. Tighten any knobs or clamps to secure them firmly. Ensure the legs are fully extended and locked into position to provide maximum support.

Image 4.2.2: Securing the stability legs to the saw stand.
Verifica l'estabilitat: Gently push down on the extension table to confirm it is stable and does not wobble. Adjust the legs as needed to achieve a level and secure work surface.

5. Instruccions de funcionament

The DT-10IN MAX Extendable Table provides an expanded surface for supporting large tiles during cutting operations with the DT-250 MAX tile saw.

Preparar la rajola: Place the large-format tile onto the combined work surface of the DT-250 MAX and the DT-10IN MAX extension table. Ensure the tile is fully supported and stable across its length.
Image 5.1.1: Positioning a large tile for cutting.
Align for Cut: Adjust the tile's position to align the desired cut line with the saw blade. The rubber surface of the extension table helps prevent the tile from slipping during alignment and cutting.
Realitza el tall: Follow the operating instructions for your RUBI DT-250 MAX tile saw to perform the cut. Maintain steady pressure and guide the tile smoothly across the cutting path, ensuring continuous support from the extension table.
Remove Cut Pieces: Once the cut is complete, carefully remove the tile pieces from the work surface. Always ensure the saw blade has come to a complete stop before handling cut materials.

6. Manteniment

Regular maintenance ensures the longevity and optimal performance of your DT-10IN MAX Extendable Table.

Neteja: After each use, clean the rubber surface and aluminum frame of the extension table to remove tile dust, debris, and water residue. Use a damp cloth and mild detergent if necessary. Avoid abrasive cleaners that could damage the rubber or aluminum finish.
Inspecció: Periodically inspect the table for any signs of wear, damage, or loose connections. Pay close attention to the rubber surface for tears and the stability legs for proper function.
Emmagatzematge: Store the extension table in a clean, dry place away from direct sunlight and extreme temperatures. If detaching from the saw, store it in a manner that prevents bending or damage to the frame.

7. Solució De Problemes

This section addresses common issues you might encounter with the DT-10IN MAX Extendable Table.

Problema	Causa possible	Solució
Table is unstable or wobbles.	Cames no completament esteses o bloquejades. Table not securely attached to saw. Uneven ground surface.	Ensure stability legs are fully extended and their locking mechanisms are engaged. Verify the extension table is properly seated and secured to the DT-250 MAX. Move the entire setup to a level surface or use shims under the saw stand/legs to stabilize.
Tile slips on the table surface.	Rubber surface is dirty or wet. Excessive tile dust.	Clean the rubber surface thoroughly. Ensure the tile and table surface are dry before use. Wipe away tile dust regularly during operation.
Difficulty attaching/detaching the table.	Misalignment of connection points. Debris in connection slots.	Carefully align the table with the saw's connection points. Clean any debris from the connection slots on both the table and the saw.

8. Especificacions

Model: DT-10IN MAX
Número de peça: 58907
Compatibilitat: RUBI DT-250 MAX Tile Saw (Ref. 26994)
Material: Reinforced Extruded Aluminum, Rubber Surface
Dimensions del producte: Aproximadament 50" de llargada x 16" d'amplada x 4" d'alçada (127 cm de llargada x 40.6 cm d'amplada x 10.2 cm d'alçada)
Pes de l'article: Aproximadament 28.2 lliures (12.8 kg)
Maximum Tile Support Length: Up to 48 inches (120 cm) when combined with DT-250 MAX

9. Informació de la garantia

The RUBI DT-10IN MAX Extendable Table is covered by a garantia limitada. For specific terms, conditions, and duration of your warranty, please refer to the warranty card included with your product or visit the official RUBI weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

10. Atenció al client

For technical assistance, spare parts, or further information regarding your RUBI DT-10IN MAX Extendable Table, please contact RUBI customer service:

Weblloc: www.rubi.com
Informació de contacte: Refer to the "Contact Us" section on the official RUBI weblloc web per a números de telèfon regionals i assistència per correu electrònic.

When contacting support, please have your product model (DT-10IN MAX) and part number (58907) available.