STEM Flying Insect Fan Trap: User Manual

Introducció

This manual provides essential information for the proper setup, operation, and maintenance of your STEM Flying Insect Fan Trap. Please read these instructions thoroughly before using the device to ensure safe and effective indoor insect control. This device is designed to attract and trap flying insects such as mosquitoes, fruit flies, and house flies using a combination of UV light and a quiet fan, capturing them on a replaceable glue trap.

Informació important de seguretat

PRECAUTIONARY STATEMENTS AND INSTRUCTIONS PERTAINING TO THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:

• Always follow basic precautions when using electrical appliances.
• Llegiu i deseu aquestes instruccions per a referència futura.
• Close supervision is necessary when the product is used near children to reduce the risk of injury.
• The product must be handled and applied by an adult.
• No introduïu els dits ni les mans al producte.
• For safe use, plug the device only into properly functioning 120-volt wall outlets where the device is adequately ventilated.
• If using a GFCI outlet, test it on a regular basis.
• Do not use with extension cords, multi-plugs, or 3-prong adapters.
• No submergiu el dispositiu en aigua.
• Do not use the device outdoors. It is intended for indoor use only.
• Use only the product's recommended glue traps in this device.
• MANTENIU FORA DE L'ACCESSIT DELS NENS I MASCOTES.

Contingut del paquet

The STEM Flying Insect Fan Trap Starter Kit includes:

• 1 STEM Flying Insect Fan Trap Device
• 5 Refillable Glue Traps
• 1 Six-foot Power Cord

Instruccions de configuració

1. Prepareu el dispositiu: To open the device, rotate the upper part of the unit counter-clockwise.
2. Insert Glue Trap: Remove the protective film from one glue trap to expose the sticky surface. Insert the glue trap into the device, ensuring it sits flat.
3. Tanca el dispositiu: Replace the upper part of the device and rotate it clockwise to securely close.
4. Encès: Plug the device into a properly functioning 120-volt indoor wall outlet.
5. Col·locació: Position the trap in areas where flying insects are present, such as kitchens, bathrooms, basements, near plants, pet feeding stations, dining areas, and entryways. Ensure the device is ventilated and not obstructed.

Instruccions de funcionament

The STEM Flying Insect Fan Trap utilizes dual attraction technology, combining a discreet UV light and a quiet fan to effectively capture flying insects.

• Atracció de llum UV: The integrated UV light attracts flying insects towards the device.
• Fan Capture: A quiet fan pulls the attracted insects into the device, where they are captured on the sticky glue trap.

Configuració personalitzable

Use the touch display on top of the device to select your preferred fan speed and set a timer.

• Velocitat del ventilador: Choose between available fan speed settings for optimal performance. The fan operates quietly.
• Opcions del temporitzador: Set the device to run for 3, 8, or 12 hours, or select continuous 24/7 operation.

Manteniment

Replacing Glue Traps

The glue trap should be replaced when it is full of captured insects. This ensures continuous and effective pest control.

1. Desconnecta el dispositiu: Always unplug the device from the electrical outlet before performing any maintenance.
2. Open Device: Rotate the upper part of the device counter-clockwise to open it.
3. Remove Used Trap: Carefully remove the full glue trap from the base of the device.
4. Eliminar: Dispose of the used glue trap in the trash.
5. Insert New Trap: Insert a fresh, insecticide-free glue trap into the device, ensuring the sticky side is exposed and it sits flat.
6. Tanca el dispositiu: Replace the upper part and rotate clockwise to close.
7. Connectar: Plug the device back into the electrical outlet.

Neteja del dispositiu

To clean the device, first remove it from the electrical outlet. Use the provided brush to remove any debris from the fan and interior surfaces.

Emmagatzematge i eliminació

• Emmagatzematge: Store the device and unused glue traps in a cool, dry place.
• Eliminació: Unplug the cord from the device. Remove the glue trap from the base and dispose of it in the trash.

Resolució de problemes

No specific troubleshooting steps are provided in the product information. If the device is not functioning as expected, ensure it is properly plugged in, the glue trap is correctly inserted, and there are no obstructions to the fan. For further assistance, please contact customer support.

Especificacions

Garantia i Suport

Per obtenir més informació sobre la garantia, visiteu ghseal.com.

For questions or comments, please call customer support at 800-558-5252.