1. Introducció i finalview
This manual provides essential information for the safe and effective use of your Sharp Humidifying Air Purifier, model KI-TS50-W. This appliance combines air purification with humidification, featuring Sharp's unique Plasmacluster 25000 technology and an efficient Coanda airflow system. Its slim design is suitable for various room sizes, including single rooms and bedrooms.
Image: The Sharp KI-TS50-W Humidifying Air Purifier positioned in a modern living space, highlighting its slim profile.
2. Informació de seguretat
Llegiu atentament totes les instruccions de seguretat abans de fer servir l'aparell per evitar lesions o danys. Conserveu aquest manual per a futures consultes.
- Always connect the appliance to a power outlet with the specified voltage.
- Do not block the air inlet or outlet vents. Ensure adequate space around the unit for proper airflow.
- Do not insert fingers or objects into any openings.
- Do not use the appliance near flammable gases or combustible materials.
- Unplug the power cord before cleaning, maintenance, or when not in use for extended periods.
- Mantingueu l'aparell fora de l'abast dels nens i de les mascotes.
- Use only clean tap water in the water tank. Do not add chemicals or aromatic substances.
3. Components del producte
Familiarize yourself with the main parts of your air purifier:
- Unitat principal: Houses the fan, motor, and control panel.
- Dipòsit d'aigua: Removable tank for humidification.
- Prefiltre: Captures large dust particles. Located on the rear panel.
- Electrostatic HEPA Filter: Captures fine particles.
- Double Deodorizing Filter: Absorbs various odors.
- Filtre humidificador: Used for humidification.
Imatge: Frontal view of the Sharp KI-TS50-W Humidifying Air Purifier, showing the main unit and control panel.
Imatge: Part posterior view of the Sharp KI-TS50-W Humidifying Air Purifier, showing the air intake and pre-filter location.
Imatge: Explosió view of the internal filter assembly, showing the pre-filter, electrostatic HEPA filter, and double deodorizing filter.
4. Configuració
Segueix aquests passos per configurar el teu purificador d'aire:
- Desembalatge: Traieu amb cura la unitat del seu embalatge. Conserveu l'embalatge per a futurs transports o emmagatzematge.
- Instal·lació del filtre: Open the rear panel. Ensure all filters (pre-filter, HEPA filter, deodorizing filter) are correctly installed and any protective plastic bags are removed. Close the rear panel securely.
- Col·locació: Place the unit on a stable, flat surface. Ensure there is at least 20 cm of space from walls or furniture to allow for optimal airflow. Avoid placing it in direct sunlight or near heat sources.
- Fill Water Tank (for humidification): Remove the water tank from the side of the unit. Fill it with clean tap water up to the maximum fill line. Reinsert the tank firmly into the unit.
- Connexió d'alimentació: Connecteu el cable d'alimentació a una presa elèctrica amb connexió a terra.
5. Instruccions de funcionament
The control panel on top of the unit allows you to manage various functions.
Image: Close-up of the top control panel with various buttons and indicators.
- Encès/apagat: Premeu el botó d'encesa per encendre o apagar la unitat.
- Selecció del mode: Cycle through available modes such as Air Purification Only, Humidifying Air Purification, and various fan speed settings.
- Velocitat del ventilador: Adjust the fan speed (e.g., Silent, Medium, High, Auto). The 'Silent' mode operates at a low noise level, ideal for bedrooms.
- Plasmacluster Operation: The Plasmacluster 25000 function operates automatically in most modes to release ions into the air, helping to purify and deodorize.
- Coanda Airflow: The unit utilizes Coanda airflow to efficiently draw in dust and particles from a wide area, enhancing air purification performance.
Image: Diagram showing the Coanda airflow pattern, where air is circulated to draw in dust from a wide area, combined with Plasmacluster ion release.
The unit is designed for low-noise operation, achieving approximately 43dB even during strong humidification, ensuring a comfortable environment.
Image: Visual representation of humidification mist being released from the top of the unit, emphasizing quiet operation.
6. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del purificador d'aire.
- Neteja del prefiltre: The large pre-filter on the rear panel can be easily cleaned by vacuuming directly without removing the panel. Clean approximately once a month or as needed.
Image: A person demonstrating how to clean the pre-filter on the rear of the air purifier using a vacuum cleaner attachment.
- Neteja del dipòsit d'aigua: Clean the water tank regularly to prevent mold and bacteria growth. Rinse with clean water and wipe dry.
- Humidifying Filter Cleaning: The humidifying filter should be cleaned periodically. Refer to the detailed instructions in the full manual for specific cleaning methods and frequency.
- Electrostatic HEPA Filter & Double Deodorizing Filter: These filters are not washable and should be replaced according to the recommended schedule (typically every 10 years, depending on usage and environment).
Image: Diagram showing the three filter layers: the pre-filter, the double deodorizing filter, and the electrostatic HEPA filter.
Image: Illustration of the double deodorizing filter and various odors it is designed to absorb, such as tobacco smoke, pet odors, cooking smells, and VOCs.
7. Solució De Problemes
Si teniu problemes amb el purificador d'aire, consulteu els següents problemes i solucions habituals:
- La unitat no s'encén: Check if the power cord is securely plugged into the outlet. Ensure the rear panel and water tank are correctly installed.
- No humidification: Check if the water tank is filled with water and correctly inserted. Ensure the humidification mode is selected.
- Soroll inusual: Check for any foreign objects in the air inlets or outlets. Ensure filters are properly seated. If the noise persists, contact customer support.
- Reducció del flux d'aire o de la purificació: Clean the pre-filter. Check if other filters need replacement.
- Indicator lights flashing: Refer to the full instruction manual for specific error codes or indicator light patterns. This often indicates a need for cleaning or water refill.
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb el servei d'atenció al client de Sharp.
8. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | KI-TS50-W |
| Marca | Afilat |
| Recommended Plasmacluster Area (approx.) | 13 tatami mats (approx. 21.5 m²) |
| Recommended Air Purification Area (approx.) | 23 tatami mats (approx. 38 m²) |
| Maximum Humidification Capacity | 600 ml/h |
| Air Purification Time (8 tatami mats) | 12 minuts |
| Nivell de soroll de funcionament | 17-51 dB |
| Dimensions (L x P x A) | 38.4 x 23 x 61.9 cm |
| Pes del producte | 7.9 kg |
| Font d'alimentació | Cable d'alimentació CA |
Image: Diagram illustrating the width (384mm), depth (230mm), and height (619mm) of the Sharp KI-TS50-W unit.
9. Garantia i Suport
For warranty information, please refer to the separate warranty card included with your product. For technical support, replacement parts, or further assistance, please contact Sharp customer service. Contact details can typically be found on the manufacturer's weblloc web o a la documentació de la garantia.
