Vetroo 850W 80 Plus Gold Full Modular ATX 3.1 Power Supply User Manual

1. Introducció

This manual provides essential information for the installation, operation, and maintenance of your new Vetroo 850W 80 Plus Gold Full Modular ATX 3.1 Power Supply. Please read this manual thoroughly before installation and keep it for future reference.

Figure 1: Vetroo 850W Power Supply (White)

2. Característiques del producte

• Preparat per a PCIe Gen 5.1: Meets the latest PCIE 5.1 standards for improved performance and efficiency. Backward compatible with both PCIE 4.0 and 3.0.
• Fully ATX 3.1 Compliant: Designed to meet the newest, most advanced power supply standards.
• Premium 105°C Capacitors: High-quality materials and construction ensure stable, low-temperature operation.
• Certificació 80+ Gold: Meets high standards for quality and efficiency, ensuring reliable performance and energy savings.
• Disseny totalment modular: Allows for easy cable management and customization, reducing cable clutter by only installing necessary cables.
• Funcionament silenciós: Features a 120mm FDB (Fluid Dynamic Bearing) fan for quiet cooling.

Figura 2: Mésview of Vetroo 850W Power Supply features

3. Contingut del paquet

Verifiqueu que tots els components siguin presents al paquet:

• Vetroo 850W Power Supply Unit
• Modular Cable Set (including 24-pin ATX, CPU, PCIe, SATA, Molex, FDD connectors)
• Cable d'alimentació CA
• Cargols de muntatge
• Lligaments de gestió de cables
• Storage Bag for Unused Cables

Figure 3: Included Modular Cables

4. Informació de seguretat

WARNING: Improper installation or use can result in serious injury or damage to your system.

• Always disconnect the AC power cord from the wall outlet before installing or removing the power supply.
• No obriu la font d'alimentació. Alt voltatgetagés present a l'interior, fins i tot quan estan desconnectats.
• Ensure all cables are securely plugged into their respective ports. Loose connections can cause damage.
• Use only the modular cables provided with this power supply. Third-party cables may not be compatible and could cause serious damage.
• Install the power supply in a well-ventilated area, away from high humidity and extreme temperatures.

5. Configuració i instal·lació

Follow these general steps for installing your power supply. Refer to your PC case and motherboard manuals for specific instructions.

1. Prepareu el vostre sistema: Assegureu-vos que l'ordinador estigui apagat i desendollat ​​de la presa de corrent.
2. Muntar la font d'alimentació: Secure the power supply unit into the designated bay in your PC case using the provided mounting screws.
3. Connecteu els cables d'alimentació principals: Connecteu el cable ATX de 24 pins a la placa base.
4. Connect CPU Power Cables: Connect the 8-pin (4+4) CPU power cable(s) to your motherboard.
5. Connect PCIe Power Cables: Connect the necessary PCIe power cables (e.g., 12V-2x6 for PCIe 5.1 GPUs, or 8-pin (6+2) for older GPUs) to your graphics card(s).
   

   Figure 4: Dual PCIe 5.1 Connectors

6. Connecteu els cables perifèrics: Connect SATA, Molex, and FDD cables to your storage drives and other peripherals as needed.
7. Gestió de cables: Utilize the fully modular design and included cable ties to route cables neatly, improving airflow and aesthetics.
8. Comprovació final: Double-check all connections to ensure they are secure before closing your PC case.

6. Instruccions de funcionament

After successful installation, you can power on your system.

• Encès: Connect the AC power cord to the power supply and a wall outlet. Flip the main power switch on the power supply to the 'ON' position.
• Mode ECO: The power supply features an ECO mode switch. When 'ON', the fan will stop spinning unless the load is above approximately 50% of the rated capacity, ensuring silent operation at low loads. When 'OFF', the fan will spin continuously.

Figure 5: Power Switch and ECO Mode

7. Manteniment

Un manteniment adequat garanteix la longevitat i el rendiment òptim de la vostra font d'alimentació.

• Neteja: Periodically clean the exterior of the power supply and the fan grille to prevent dust buildup, which can impede airflow and cooling. Use compressed air or a soft brush. Ensure the power supply is off and unplugged before cleaning.
• Funcionament del ventilador: The 120mm Fluid Dynamic Bearing fan is designed for durability and quiet operation. In ECO mode, the fan may not spin at low loads; this is normal.

8. Solució De Problemes

Si teniu problemes amb la font d'alimentació, tingueu en compte el següent:

• Sense energia: Ensure the AC power cord is securely connected to both the power supply and the wall outlet. Verify the main power switch on the power supply is in the 'ON' position. Check your wall outlet with another device.
• System Instability/Shutdowns: This power supply includes multiple protection features (OVP, OCP, OPP, SCP, UVP, OTP) to safeguard your components. If your system is unstable or shuts down unexpectedly, it could indicate an issue with power delivery or another component. Ensure all power connections are firm.
• El ventilador no gira: If the ECO mode is enabled, the fan will not spin until the power supply reaches approximately 50% load. This is normal operation for quiet performance. If the fan does not spin under heavy load, contact support.
• Sorolls inusuals: If you hear unusual noises (e.g., coil whine, grinding), power down your system immediately and contact support.

9. Especificacions

10. Garantia i Suport

The Vetroo 850W Power Supply comes with a 10 anys de garantia, ensuring long-term reliability and peace of mind. For technical support, warranty claims, or any questions regarding your product, please visit the official Vetroo weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.