1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Srliya Smart Thermostat. This device is designed for precise temperature control in underfloor heating systems or steam rooms, offering a color display and intuitive knob control for user convenience.
Figura 1: Frontal view of the Srliya Smart Thermostat.
2. Informació de seguretat
Please read all safety warnings and instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or property damage.
- La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb les normes elèctriques locals.
- Desconnecteu sempre l'alimentació a l'interruptor automàtic abans d'instal·lar o fer el manteniment del termòstat.
- Do not install the thermostat in areas with excessive moisture or direct water exposure.
- Assegureu-vos que totes les connexions del cablejat estiguin segures i aïllades correctament.
- Aquest dispositiu només està dissenyat per a ús interior.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- 1 x Srliya Smart Thermostat
- 2 x cargols de muntatge
- 1 x Manual d'instruccions (aquest document)
Figure 2: Thermostat and included screws.
4. Configuració i instal·lació
4.1 Ubicació d'instal·lació
Install the thermostat in a location that accurately reflects the room temperature, away from direct sunlight, drafts, or heat sources. The thermostat is designed for universal cassette installation, fitting both 86x86mm square boxes or European 60mm round boxes.
4.2 Instruccions de cablejat
WARNING: Disconnect power at the circuit breaker before proceeding with wiring.
- Traieu amb cura el panell frontal del termòstat per accedir als terminals de cablejat.
- Connect the power supply wires (95-240V AC, 50-60Hz or 24V DC/AC, 50-60Hz) to the designated terminals.
- Connect the heating system wires (e.g., underfloor heating cables or boiler control wires) to the appropriate load terminals. The thermostat supports a current load of 5A for water heating/gas boilers or 16A for electric heating.
- Connect the NTC3950, 10k sensor to its dedicated terminals. This sensor measures the floor or room temperature.
- Ensure all wires are securely fastened. The terminals are designed for wire sizes 2x1.5mm² or 1x2.5mm².
- Mount the thermostat base into the wall box using the provided screws.
- Reattach the front panel to the thermostat base.
Figure 3: Thermostat showing installation depth.
4.3 Engegada inicial
After installation, restore power at the circuit breaker. The thermostat's color display should illuminate, indicating it is ready for operation.
5. Instruccions de funcionament
The Srliya Smart Thermostat features a liquid crystal color display and a capacitive touch knob for easy operation.
5.1 Mostra finalview
The color display clearly shows the current room temperature, the set temperature, operating mode, and other relevant information. The display is designed for easy readability.
Figure 4: Close-up of the control knob and display.
5.2 Configuració de la temperatura
Per ajustar la temperatura desitjada:
- Rotate the central knob clockwise to increase the set temperature.
- Rotate the central knob counter-clockwise to decrease the set temperature.
- The display will show the new set temperature, and the system will adjust heating to reach this target.
5.3 Mode Selection (If Applicable)
Refer to the on-screen prompts or specific icons near the knob for advanced mode selections, such as programming schedules or switching between manual and automatic modes. Typically, a short press on the knob or a specific touch area activates mode selection, followed by knob rotation to navigate and another press to confirm.
6. Manteniment
6.1 Neteja
To clean the thermostat, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the display or casing. Ensure the thermostat is powered off before cleaning.
6.2 Atenció general
Avoid exposing the thermostat to extreme temperatures, direct sunlight for prolonged periods, or excessive humidity. Do not attempt to disassemble the unit beyond what is described in the installation instructions.
7. Solució De Problemes
Si teniu problemes amb el termòstat, consulteu els problemes i solucions més comuns següents:
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla del termòstat està en blanc. | Sense font d'alimentació. | Comproveu l'interruptor i les connexions del cablejat. Assegureu-vos que s'hagi restablert l'alimentació. |
| El sistema de calefacció no respon. | Incorrect wiring; thermostat in wrong mode; heating system fault. | Verify wiring connections. Check thermostat operating mode. Consult a heating technician if the heating system itself is faulty. |
| Lectura de temperatura inexacta. | Sensor issue; thermostat location. | Ensure the NTC sensor is properly connected. Relocate the thermostat if it's in a drafty or hot spot. |
| No es pot canviar la configuració. | Thermostat locked or in a specific program mode. | Refer to the operating instructions for unlocking or changing modes. |
8. Especificacions
Detailed technical specifications for the Srliya Smart Thermostat:
| Característica | Especificació |
|---|---|
| Número de model | Srliyadu9so3zbwy-11 |
| Voltage | 95-240V AC, 50-60Hz or 24V DC/AC, 50-60Hz |
| Sensor | NTC3950, 10k |
| Interval de temperatura de l'habitació | 5-70°C |
| Estableix el rang de temperatura | 5-35°C |
| Rang de temperatura de visualització | 5-70°C |
| Temperatura ambient | 0 a 45 °C |
| Humitat ambiental | 5-95% HR (sense condensació) |
| Temperatura d'emmagatzematge | -5 °C a 45 °C |
| Consum d'energia | <1.5W |
| Nivell de protecció | IP20 |
| Tipus de botó | Tacte capacitiu |
| Càrrega actual | 5A (Water Heating, Water Gas Boiler) / 16A (Electric Heating) |
| Caixa d'instal·lació | 86x86mm Square Box or European 60mm Round Box |
| Mida del cable del terminal | 2x1.5mm² or 1x2.5mm² |
| Pes de l'article | 7.5 unces (aprox. 212 g) |
| Dimensions (paquet) | 4.72 x 3.94 x 2.76 polzades |
| Thickness (Thermostat) | 12.4mm (thin profile) |
Figura 5: lateral view illustrating the thermostat's thin design.
9. Garantia i Suport
For warranty information, please refer to the documentation provided with your purchase or contact the retailer. For technical support or further assistance, please reach out to the manufacturer or your point of purchase.
