Producte acabatview
The Lian Li Galahad II Lite 360mm Liquid CPU Cooler is an all-in-one (AIO) solution designed for efficient and quiet CPU cooling. This model features a high-performance pump, a high-density aluminum radiator, and three 28mm thick performance fans. It is compatible with a wide range of Intel and AMD sockets, ensuring broad applicability for various desktop systems.
Imatge: Més deview of the Lian Li Galahad II Lite Series, highlighting efficient cooling and simplified performance.
Característiques clau
- High Airflow & Low Noise: Delivers up to 73.14 CFM of airflow at a maximum of 29.8 dBA for superior cooling without excessive noise.
- Optimized for Radiators: Features 5.1 mm H2O static pressure, ensuring effective heat dissipation even under high-resistance conditions.
- Durability & Reliability: Equipped with a Fluid Dynamic Bearing (FDB) design for extended lifespan and reduced operational noise.
- PBT Performance Fans: Includes three pre-installed 28mm thick fans, with options for upgradeable ARGB side light strips.
- Customizable Pump ARGB Blockhead & Switchable Pump Lid: Allows for aesthetic customization and proper logo orientation.
Configuració i instal·lació
This section provides general guidance for installing your Lian Li Galahad II Lite CPU Cooler. Always refer to your motherboard's manual for specific instructions regarding CPU socket preparation.
Compatibilitat
The cooler supports the following CPU sockets:
- Intel: LGA 1851 / 1700
- AMD: AM5 / AM4
Image: Visual representation of supported Intel and AMD sockets, along with thermal paste application guidance.
Mounting Process (General)
- Prepara la placa base: For Intel sockets, install the provided backplate behind the motherboard and secure the spacers on the front side. For AMD sockets, remove the original retention brackets and replace them with the provided AMD retention brackets, ensuring the arrow points towards the CPU.
- Aplicar pasta tèrmica: Apply a small amount of thermal paste to the center of your CPU's integrated heat spreader (IHS). A thermal paste control film and spreader are included to help ensure the correct amount is applied.
- Mount Water Block: Carefully place the water block onto the CPU, aligning it with the mounting screws. Tighten the screws in a diagonal pattern until snug, ensuring even pressure.
- Radiador i ventiladors: The fans are pre-installed on the radiator. Mount the radiator to an available fan mounting location in your PC case (e.g., top, front, or side).
Video: An unboxing video of the Lian Li Galahad II Lite, demonstrating the components and initial setup steps. This video is provided by LIAN LI direct store.
Tube Orientation for Optimal Performance
For optimal performance and longevity of your AIO cooler, it is recommended to install the water block with the tubes facing downward, towards the GPU side of your motherboard. This helps prevent air bubbles from accumulating in the pump, ensuring consistent coolant flow.
Image: Diagram illustrating the rotatable pump logo and a note on installing tubes facing downward for optimal performance.
Rotatable Pump Logo
The pump includes a removable logo lid, allowing you to adjust the logo orientation to suit any setup, ensuring the Lian Li logo is always displayed correctly.
Video: A demonstration of the switchable pump lid feature on the GA II Lite, showing how to rotate the logo for correct orientation. This video is provided by LIAN LI direct store.
Instruccions de funcionament
Fan and Pump Control
The fans and pump are PWM (Pulse Width Modulation) controllable, allowing for dynamic adjustment of speed based on CPU temperature. Connect the fan and pump cables to the appropriate headers on your motherboard (CPU_FAN, AIO_PUMP, or dedicated fan headers) and configure fan curves in your motherboard's BIOS or through compatible software.
Image: Diagram illustrating the simple cable connections for the AIO cooler, utilizing a daisy-chain fan design.
Customizable ARGB Lighting
The pump blockhead features customizable ARGB lighting with 16 LEDs, dual infinity mirror rings, and an outer diffuser. This lighting can be synchronized with popular motherboard RGB software such as Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome Sync.
Image: Close-up of the pump's ARGB lighting, showcasing the infinity mirror effect and compatibility with various motherboard sync technologies.
Manteniment
- Eliminació de pols: Regularly clean the radiator fins and fan blades to prevent dust buildup, which can impede airflow and reduce cooling performance. Use compressed air or a soft brush.
- Inspeccionar tubs: Periodically check the tubing for any signs of kinks, leaks, or damage. Ensure connections are secure.
- Comprovació del refrigerant: While AIOs are sealed systems, monitor CPU temperatures for any unusual spikes that might indicate a loss of coolant or pump malfunction.
Resolució de problemes
- Temperatures altes de la CPU:
- Ensure the water block is properly seated on the CPU and screws are tightened evenly.
- Verify thermal paste application is adequate and evenly spread.
- Check that pump and fan cables are securely connected to the correct motherboard headers.
- Confirm fan and pump speeds are configured correctly in BIOS/software and are not running too low.
- Ensure radiator is not obstructed by dust or other components.
- Soroll inusual:
- Identify if the noise is coming from the pump or fans.
- If from fans, check for obstructions or loose mounting. Adjust fan curves to reduce speed if noise is excessive.
- If from the pump, ensure tubes are positioned to prevent air bubbles from entering the pump.
- Problemes d'il·luminació RGB:
- Verify ARGB cables are correctly connected to the motherboard's 5V ARGB header.
- Ensure compatible RGB software is installed and configured correctly.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | GA2L36PB |
| Dimensions del producte | 4.72" de llargada x 1.06" d'amplada x 15.62" d'alçada (120 mm de llargada x 27 mm d'amplada x 397 mm d'alçada) |
| Pes de l'article | 5.6 lliures |
| Marca | Lian Li |
| Velocitat de la bomba | Fins a 3800 RPM |
| Dimensions del bloc d'aigua | 74 x 74 x 67 mm |
| Material del radiador | Alumini |
| Aletes del radiador | Single Wave |
| Longitud del tub | 400 mm |
| Dimensions del ventilador | 124 x 120 x 28 mm |
| Velocitat del ventilador | 200 - 2500 rpm |
| Pressió estàtica del ventilador | 5 mm H2O |
| Flux d'aire del ventilador | 73.14 CFM |
| Nivell de soroll del ventilador | 29.8 dBA |
| Tipus de rodament | FDB Bearing |
| Dispositius compatibles | Escriptori |
| Mètode de refrigeració | Aigua |
| Tipus de connector d'alimentació | 3-pins |
| Voltage | 12 volts (CC) |
| Wattage | 280 watts |
Image: A table detailing the specifications for various Lian Li Galahad II Lite models, including pump speed, dimensions, fan speeds, and noise levels.
Image: Diagram showing the dimensions of the 360mm radiator (397mm x 120mm x 27mm) and fan dimensions (124mm x 120mm x 28mm).
Garantia i Suport
The Lian Li Galahad II Lite series is backed by a comprehensive 6 any de garantia covering the fans and provides hardware damage compensation due to non-manmade leakage within the first 3 years.
Leakage Compensation for 6 Years: If leakage damages the product, compensation will be based on the purchase record date. Hardware compensation will be calculated with an annual depreciation rate of 15%:
- Year 1: 100% of hardware cost
- Year 2: 85% of hardware cost
- Year 3: 70% of hardware cost
- Year 4: 55% of hardware cost
- Year 5: 40% of hardware cost
- Year 6: 25% of hardware cost
