Instruccions importants de seguretat
Please read all instructions carefully before using your Jocca Funny Cooking Crepe Maker. Keep this manual for future reference.
- Do not touch hot surfaces. Always use the ergonomic handle.
- Per protegir-vos contra les descàrregues elèctriques, no submergiu el cable d'alimentació, els endolls ni l'aparell en si en aigua ni en cap altre líquid.
- És necessària una supervisió estreta quan l'aparell és utilitzat per o a prop dels nens.
- Unplug the crepe maker from the outlet when not in use and before cleaning. Allow it to cool completely before handling or cleaning.
- Do not operate any appliance with a damaged cord or plug, or if the appliance malfunctions or has been damaged in any manner. Contact customer service for assistance.
- L'ús d'accessoris no recomanats pel fabricant de l'aparell pot causar lesions.
- No utilitzeu l'aparell a l'exterior.
- No deixeu que el cable d'alimentació pengi de la vora d'una taula o taulell, ni toqui superfícies calentes.
- No col·loqueu l'aparell sobre o prop d'un cremador de gas o elèctric calent, ni en un forn calent.
- Always ensure the appliance is placed on a stable, heat-resistant surface during use.
- Do not use the appliance for purposes other than its intended use (crepe making).
Producte acabatview
Components
- Crepe Maker Unit with Non-Stick Plate
- Mànec ergonòmic
- Temperature Control Dial (OFF, I, II, III)
- Cable d'alimentació
- Separate Dipping Plate/Lid
Imatge: Superior view of the crepe maker, highlighting its non-stick cooking surface.
Imatge: Part inferior view of the crepe maker, illustrating the temperature control dial and stable feet.
Especificacions tècniques
| Marca | Jocca |
| Model | 2488T |
| Color | Turquesa |
| Dimensions del producte | 21 x 31 x 3 cm (Diameter 21 cm) |
| Wattage | 600 watts |
| Voltage | 230 Volts |
| Material | Acer inoxidable amb recobriment antiadherent |
| Característiques especials | 2 functions in 1: Crepe Maker and Dipping Plate |
| Nombre de configuracions de temperatura | 3 (plus OFF) |
Configuració
Follow these steps to set up your crepe maker before first use:
- Desembalar: Traieu amb cura tots els components de l'embalatge. Conserveu l'embalatge per a emmagatzematge o transport futur.
- Neteja: Wipe the non-stick cooking plate and the dipping plate with a damp drap. Assegureu-vos que estiguin secs abans d'usar-los.
- Col·locació: Place the crepe maker on a stable, flat, and heat-resistant surface, away from flammable materials. Ensure there is adequate ventilation around the appliance.
- Connexió d'alimentació: Connecteu el cable d'alimentació a una presa de corrent estàndard de 230 V.
Instruccions de funcionament
Abans del primer ús
It is recommended to perform an initial burn-off to remove any manufacturing residues:
- Plug in the crepe maker and turn the temperature dial to setting III (màxim).
- Allow the appliance to heat for approximately 5-10 minutes. A slight odor or smoke may be present; this is normal.
- Gireu el dial a OFF and unplug the unit. Let it cool completely.
- Wipe the non-stick plate with a clean, damp tela.
Fer creps
Follow these steps for optimal crepe preparation:
- Preparar la massa: Mix your favorite crepe batter recipe. Ensure the batter is smooth and free of lumps.
- Preescalfament: Plug in the crepe maker and turn the temperature dial to your desired setting (e.g., II for medium heat, III for higher heat). Allow it to preheat for 3-5 minutes. The indicator light (if present) will signal when ready.
- Prepare Dipping Plate: Pour a thin layer of crepe batter into the provided separate dipping plate. The depth should be sufficient to coat the crepe maker's surface.
- Dip: Carefully invert the hot crepe maker, dipping its non-stick cooking surface into the batter in the dipping plate. Hold it submerged for 2-3 seconds, ensuring the surface is evenly coated.
- cuiner: Lift the crepe maker, allowing any excess batter to drip back into the dipping plate. Immediately place the crepe maker back on its feet. Cook for approximately 1-2 minutes, or until the edges of the crepe begin to lift and the surface is lightly golden.
- Eliminar: Use a non-metallic spatula to gently loosen the edges and slide the crepe off the cooking surface onto a serving plate.
- Repetiu: Repeat the dipping and cooking process for subsequent crepes. Adjust temperature and dipping time as needed.
- Acabat: Once finished, turn the temperature dial to OFF and unplug the appliance. Allow it to cool completely before cleaning.
Image: The crepe maker being inverted and dipped into the batter in the accompanying plate.
Image: The crepe maker alongside a stack of finished crepes on the separate plate.
Control de temperatura
Your Jocca Funny Cooking Crepe Maker features a 3-level temperature control dial, allowing you to adjust the heat according to your recipe and preference:
- DESACTIVAT: Apaga l'aparell.
- I (Low): Suitable for keeping crepes warm or for very delicate cooking.
- II (Medium): Ideal for most standard crepe recipes, providing even cooking and light browning.
- III (High): For faster cooking or achieving a crispier texture. Use with caution to prevent burning.
Experiment with different settings to find the perfect temperature for your desired crepe consistency.
Manteniment i Neteja
Proper cleaning and maintenance will extend the life of your crepe maker:
- Refredament: Always ensure the crepe maker is unplugged and has cooled completely before attempting to clean it.
- Non-Stick Plate: Netegeu la superfície de cocció antiadherent amb un drap suau iamp cloth. For any stuck-on food, use a small amount of mild dish soap and then wipe thoroughly with a clean, damp cloth. Do not use abrasive cleaners, metal scouring pads, or sharp utensils, as these can damage the non-stick coating.
- Exterior: L'exterior de l'aparell es pot netejar amb un anunciamp tela.
- Dipping Plate: The separate dipping plate can be washed by hand with warm soapy water or placed in the dishwasher.
- No submergir: Never immerse the main crepe maker unit (with electrical components) in water or any other liquid.
- Emmagatzematge: Store the clean and dry crepe maker in a cool, dry place.
Resolució de problemes
If you encounter any issues with your crepe maker, refer to the following table:
| Problema | Causa possible | Solució |
|---|---|---|
| L'aparell no s'encén. | Not plugged in correctly; Power outlet not working. | Assegureu-vos que el cable d'alimentació estigui ben connectat a una presa de corrent funcional. |
| Crepes stick to the plate. | Plate not sufficiently preheated; Batter too thick; First use residue. | Ensure the crepe maker is fully preheated. Adjust batter consistency if too thick. For the first crepe, a very light brush of oil can be used. |
| Crepes are too thick or uneven. | Too much batter; Dipping time too long; Batter consistency. | Use less batter in the dipping plate. Reduce dipping time (1-2 seconds). Adjust batter consistency if too thick. |
| Crepes are not cooking evenly. | Insufficient preheating; Uneven batter coating. | Allow adequate preheating time. Ensure the crepe maker is dipped evenly into the batter. |
Garantia i Suport
This Jocca product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase.
For warranty claims, technical assistance, or inquiries regarding spare parts, please contact Jocca customer service. You can usually find contact information on the official Jocca weblloc (www.jocca.es) or through the retailer where you purchased the product.
Please retain your original purchase receipt as proof of purchase, as it will be required for any warranty service.
No intenteu reparar l'aparell vosaltres mateixos, ja que això podria anul·lar la garantia i suposar riscos per a la seguretat.
