Manual d'usuari de la fregadora elèctrica Dreazu Spin Scrubber G2

Introducció

This manual provides instructions for the safe and effective use of your Dreazu Electric Spin Scrubber Model G2. Please read this manual thoroughly before first use and retain it for future reference.

Informació important de seguretat

• Llegiu totes les instruccions abans d'utilitzar.
• This appliance is designed for household cleaning tasks only.
• Do not immerse the main unit in water beyond its IPX7 rating. Ensure the charging port cover is securely closed during use.
• Mantenir fora de l'abast dels nens.
• Do not operate the scrubber if it is damaged or malfunctioning.
• Utilitzeu només el cable de càrrega subministrat.
• Avoid using abrasive cleaners or harsh chemicals that may damage the device or brush heads.
• Disconnect from power before cleaning or performing maintenance.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• 1 x Dreazu Electric Spin Scrubber (Main Unit)
• 1 x Extension Handle
• 1 x mànec principal
• 7 x Replaceable Brush Heads (various types)
• 3 x Crevice Cleaning Brushes
• 1 x cable de càrrega USB-C
• 1 x Manual d'usuari (aquest document)
• 2 x Hooks (for storage)
• 1 x bossa d'emmagatzematge

Image: The Dreazu Electric Spin Scrubber main unit, extension handle, various brush heads, charging cable, storage bag, and wall hooks.

Característiques del producte

Powerful Motor with Two Speed Settings

The scrubber features a robust motor with two adjustable speeds:

• 350 RPM: Suitable for regular, everyday cleaning tasks.
• 450 RPM: Provides increased power for deep cleaning and stubborn stains.

Image: Illustration showing the scrubber operating at 350 RPM for daily cleaning and 450 RPM for deep cleaning, with a close-up of the internal motor.

Disseny impermeable IPX7

The device is designed with IPX7 waterproof protection, allowing safe use in damp environments such as bathrooms. The sealed structure helps prevent internal rust and short circuits.

Image: The electric spin scrubber head partially submerged in water, with "IPX7 Waterproof" text overlay, illustrating its water resistance.

Retractable and Detachable Handle

The telescopic handle can be adjusted in length from 41 inches to 48 inches, or used as a shorter 11-inch handheld unit. This design allows for cleaning hard-to-reach areas without excessive bending or kneeling.

Image: The electric spin scrubber handle shown in three configurations: short (11 inches), extended (41 inches), and fully extended (48 inches), demonstrating its adjustability.

Bateria de llarga durada

Equipped with a 2500mAh battery, the scrubber provides 60 to 90 minutes of continuous cleaning on a full charge. A full charge takes approximately 3 hours using the included USB-C cable. A power display indicates battery status.

Image: The electric spin scrubber connected to a wall charger via its USB-C cable, with an infographic detailing its 2500mAh battery capacity, 60-90 minutes working time, and 3 hours charging time.

Configuració

Càrrega del dispositiu

1. Locate the USB-C charging port on the main unit.
2. Connect the provided USB-C cable to the scrubber and a compatible USB power adapter (not included).
3. The power indicator lights will illuminate during charging and turn off when fully charged.
4. Una càrrega completa triga aproximadament 3 hores.

Muntatge del mànec

1. To use as a handheld scrubber: Attach a brush head directly to the main unit.
2. To use with the extension handle:
   • Connect the main handle to the extension handle by rotating it until secure.
   • Attach the assembled handle to the main scrubber unit by rotating it until secure.
   • To adjust the length, loosen the inner lock on the extension pole, extend or retract to the desired length (41-48 inches), and then tighten the lock.

Image: A step-by-step diagram illustrating the installation of a brush head onto the scrubber and the assembly process for the telescopic handle, including locking and unlocking mechanisms.

Attaching Brush Heads

1. Seleccioneu el capçal de raspall adequat per a la vostra tasca de neteja.
2. Align the brush head with the rotating base of the scrubber.
3. Push and twist the brush head clockwise until it clicks securely into place.
4. To remove, twist counter-clockwise and pull off.

Instruccions de funcionament

Engegada/Apagada i Ajust de Velocitat

1. Press the power button once to turn on the scrubber at the lower speed (350 RPM).
2. Press the power button a second time to switch to the higher speed (450 RPM).
3. Press the power button a third time to turn off the scrubber.

Recomanacions de neteja

Apply a suitable cleaning solution to the surface or directly to the brush head.

Gently press the rotating brush against the surface to be cleaned. Avoid excessive force, as the motor is designed to do the work.

Move the scrubber slowly and steadily over the area.

For optimal results, allow the brush to work for a few seconds on stubborn spots before moving on.

Using Different Brush Heads

The Dreazu Electric Spin Scrubber comes with 7 interchangeable brush heads and 3 crevice brushes, each designed for specific cleaning applications:

• Raspall pla gran: Ideal for large flat surfaces like floors, tile walls, and bathtubs.
• Raspall pla petit: Suitable for smaller flat areas such as sinks, cooktops, and cabinets.
• Corner/Pointed Brush: Designed for cleaning corners, gaps, grout lines, and edges.
• Fibre Sponge/Sponge: For gentle scrubbing and polishing on delicate surfaces.
• Wool Cloth/Cloth: For polishing and drying surfaces.
• Crevice Brushes: For very narrow gaps, keypads, thresholds, and detailed cleaning.

Image: A display of the seven interchangeable brush heads and three crevice cleaning brushes included with the scrubber, showing their various shapes and sizes.

Image: A collage demonstrating the use of various brush heads for different cleaning applications, including large brush for floors, small brush for sinks, pointed brush for corners, and sponge/cloth pads for other surfaces.

Manteniment

Neteja del fregador

1. After each use, remove the brush head.
2. Rinse the brush head and the rotating base of the main unit under running water.
3. Wipe the main unit and handle with a damp cloth. Do not immerse the entire main unit in water.
4. Ensure the charging port cover is sealed before rinsing.
5. Allow all parts to air dry completely before storage.

Emmagatzematge

Store the scrubber in a cool, dry place.

Use the provided hooks to hang the scrubber for convenient storage and to save space.

Image: The electric spin scrubber hanging on a wall hook in a modern bathroom, demonstrating convenient storage.

Resolució de problemes

Especificacions

Garantia i Suport

Dreazu is committed to customer satisfaction. If you encounter any issues with your Electric Spin Scrubber, please contact our dedicated after-sales support team. Refer to your purchase documentation for specific warranty details and contact information.

For further assistance, visit the official Dreazu store or contact customer service through your retailer.