1. Introducció
This manual provides instructions for the proper use and maintenance of the Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, model 4710-1205. This electronic depth gage is designed for precise depth measurements in various industrial and scientific applications. It features a digital display for clear readings and is constructed for durability and accuracy.
Image 1.1: The Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, showing the main unit and various measurement rods.
2. Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- Electronic Depth Gage Unit
- Set of Measurement Rods (7 pieces)
- Estoig d'emmagatzematge
- Warranty Letter
Image 2.1: The complete Dasqua Electronic Depth Gage Set, including the main unit, measurement rods, and storage case.
3. Característiques clau
- Resolució: 0.0005-inch / 0.01mm for precise measurements.
- Compliment estàndard: Manufactured in accordance with DIN863 standards.
- Fus: Hardened, ground, and lapped for enhanced accuracy.
- Versatilitat: Designed to accommodate a broad range of measurement applications.
- Visualització: Large, digital display for clear and quick readings.
- Construcció: Hardened stainless steel base and rods resist wear, ensuring durability and consistent accuracy.
- Reinicialització a zero: Ability to reset to zero at any position for comparative depth measurements.
4. Instruccions de configuració
4.1. Instal·lació de la bateria
The electronic depth gage typically uses a CR2032 lithium coin cell battery. To install or replace the battery:
- Locate the battery compartment cover on the back of the digital display unit.
- Use a small screwdriver or coin to open the cover.
- Inseriu una nova bateria CR2032 amb el costat positiu (+) cap amunt.
- Col·loqueu la coberta del compartiment de la bateria amb seguretat.
4.2. Attaching Measurement Rods
Select the appropriate measurement rod for the desired depth range. The set includes rods of various lengths.
- Identify the threaded end of the measurement rod.
- Carefully screw the rod into the threaded hole at the bottom of the depth gage's base until it is finger-tight. Do not overtighten.
- Ensure the rod is securely attached and straight.
Image 4.1: The electronic depth gage with a measurement rod properly attached to its base.
Image 4.2: A selection of the hardened stainless steel measurement rods provided with the depth gage set.
5. Instruccions de funcionament
5.1. Encendre/apagar
- Premeu el botó ON/OFF botó per encendre el dispositiu.
- Premeu el botó ON/OFF button again to power off the device.
5.2. Unit Conversion (Inch/Millimeter)
- Premeu el botó mm/in button to switch between millimeter (mm) and inch (in) units. The selected unit will be displayed on the screen.
5.3. Zero Setting
The zero-reset function allows for comparative measurements or setting a reference point.
- Place the depth gage on a flat, stable reference surface, ensuring the measurement rod is fully retracted or resting on the surface.
- Premeu el botó ZERO botó. La pantalla mostrarà '0.000' o '0.00'.
5.4. Prendre una mesura
- Ensure the depth gage is zeroed on a reference surface.
- Place the base of the depth gage firmly on the surface from which the depth is to be measured.
- Lower the measurement rod into the hole or recess until its tip contacts the bottom.
- Llegiu la mesura directament a la pantalla digital.
5.5. Funció Hold
- Premeu el botó MANTENIM button to freeze the current reading on the display.
- Premeu el botó MANTENIM button again to release the reading and return to live measurement.
Imatge 5.1: Detallada view of the digital display, showing the ON/OFF, mm/in, HOLD, and ZERO buttons.
6. Manteniment
6.1. Neteja
- Wipe the depth gage and rods with a clean, dry, lint-free cloth after each use.
- Per a la brutícia persistent, utilitzeu un drap lleugerament humit.ampened with isopropyl alcohol. Avoid harsh chemicals or solvents.
- Ensure no liquid enters the electronic components.
6.2. Emmagatzematge
- Store the depth gage in its protective case when not in use.
- Mantingueu el dispositiu en un lloc sec, allunyat de la llum solar directa, de temperatures extremes i d'alta humitat.
- Si l'emmagatzemeu durant un període prolongat, retireu la bateria per evitar fuites.
6.3. Substitució de la bateria
Replace the battery when the display becomes dim or erratic. Refer to Section 4.1 for battery installation instructions.
7. Solució De Problemes
- La pantalla està en blanc o té poca llum:
Check battery installation. Replace the battery if necessary. Ensure the device is powered on. - Lectures inexactes:
Ensure the depth gage is properly zeroed on a flat reference surface. Clean the measurement rod and base to remove any debris. Verify the measurement rod is securely attached. - Els botons no responen:
Check battery level. If the issue persists after battery replacement, contact customer support.
8. Especificacions del producte
| Especificació | Detall |
|---|---|
| Número de model | 4710-1205 |
| Interval de mesura | 0-16 polzades / 0-400 mm |
| Resolució | 0.0005 polzades / 0.01 mm |
| Precisió | 0.0015 polzades / 0.03 mm |
| Material | Acer inoxidable endurit |
| Font d'alimentació | CR2032 Battery (typical) |
| Dimensions del paquet | 9 x 5 x 2 polzades |
| Pes de l'article | 12.8 unces |
Image 8.1: Detailed specifications and dimensional diagram for the Dasqua 0-16 inch Electronic Depth Gage Set.
9. Garantia i Suport
This product is supplied with a warranty letter. For specific warranty terms and conditions, please refer to the documentation included in your package. For technical support, service, or inquiries regarding your Dasqua 4710-1205 Electronic Depth Gage Set, please contact the manufacturer directly through their official weblloc o canals d'atenció al client.
