Introducció
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Philips 14T5HE/46-850/IF1/G/DIM 14W T5 LED Bulb. Please read this manual thoroughly before use and retain it for future reference.
This LED bulb is designed as a direct replacement for traditional 4-foot T5 High Efficiency (HE) 28W fluorescent lamps and requires an electronic ballast for operation. It is a Plug & Play solution, ensuring compatibility with specific existing fixtures.
Informació important de seguretat
- ADVERTIMENT: Only use to replace 4' T5 HE (High Efficiency) 28W lamps (not HO lamps).
- Verify ballast type (28W T5 HE Ballasts) before installation.
- Check ballast compatibility before using this product. Incompatible ballasts may cause improper operation or damage to the bulb.
- Always disconnect power before installation or removal.
- No desmunteu ni modifiqueu la bombeta.
- Ensure the bulb is securely seated in the fixture.
- This product is designed for indoor use in dry locations unless otherwise specified by the fixture.
Descripció de la imatge: A yellow warning label with black text. The text states: "WARNING Only used to replace 4' T5 HE (High Efficiency) 28W lamps (not HO lamps). Verify ballast type (28W T5 HE Ballasts) before installation. Check ballast compatibility before using product." Below the English text, the same warning is provided in French.
Contingut del paquet
Your package contains 10 Philips 14T5HE/46-850/IF1/G/DIM 14W T5 LED Bulbs.
Descripció de la imatge: A close-up of the product packaging, indicating a "10_pack" of Philips LED tubes. The image shows the end of a box with a label confirming it contains 10 lamps.
Configuració i instal·lació
- Desconnexió d'alimentació: Abans de començar la instal·lació, assegureu-vos que l'alimentació de l'aparell estigui completament tallada al disjuntor.
- Verify Ballast Compatibility: Confirm that your existing fixture uses a compatible 28W T5 High Efficiency (HE) electronic ballast. This LED bulb is a Plug & Play type and requires an electronic ballast. It is compatible with GE F28W/T5/850/Eco and Philips F28T5/850/Alto bulbs.
- Elimina la L existentamp: Carefully remove the old fluorescent T5 lamp de l'aparell.
- Instal·leu la bombeta LED: Insert the Philips 14T5HE/46-850/IF1/G/DIM LED bulb into the fixture's G5 bi-pin sockets. Ensure both pins on each end are fully seated.
- Instal·lació segura: Gently twist the bulb if necessary to ensure it is firmly in place and making proper electrical contact.
- Restaura l'alimentació: Un cop instal·lada la bombeta de manera segura, restableix l'alimentació de l'aparell a l'interruptor.
- Prova de funcionament: Turn on the light switch to verify the LED bulb is functioning correctly.
Descripció de la imatge: Un primer pla view of the end of a Philips LED tube, showing the G5 bi-pin base. The label on the bulb indicates "TYPE A LAMP" and "Use only with electronic ballasts."
Instruccions de funcionament
The Philips 14T5HE/46-850/IF1/G/DIM LED bulb operates as a direct replacement for compatible T5 fluorescent lamps. Once installed in a fixture with a compatible electronic ballast and power is supplied, the bulb will illuminate when the fixture's switch is turned on.
- Funcionalitat regulable: This bulb is dimmable, provided the existing electronic ballast and dimmer switch are compatible with dimmable T5 LED lamps. Consult your ballast and dimmer specifications for compatibility.
- Encès instantani: Unlike some fluorescent lamps, this LED bulb provides instant full brightness upon switching on, with no warm-up time.
Manteniment
Philips LED bulbs are designed for long-term, maintenance-free operation. Minimal maintenance is required.
- Neteja: Ensure power is disconnected before cleaning. Gently wipe the bulb with a soft, dry, or slightly damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Substitució: When the bulb reaches the end of its operational life, replace it with another compatible Philips 14T5HE/46-850/IF1/G/DIM LED bulb. Follow the installation steps outlined in the "Setup and Installation" section.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La bombeta no s'encén. |
|
|
| La bombeta parpelleja o s'atenua inesperadament. |
|
|
Especificacions
| Nom del model: | 14T5HE/46-850/IF1/G/DIM |
| Número de peça: | 476523 |
| Marca: | Signify (Philips) |
| Tipus de llum: | LED |
| Wattage: | 14 watts |
| Equivalent Fluorescent: | 28W T5 HE (High Efficiency) |
| Base de la bombeta: | G5 Bi-Pin |
| Temperatura de color: | 5000 Kelvin |
| Voltage: | 120 Volts (Ballast Dependent) |
| Característica especial: | Dimmable (with compatible ballast/dimmer), Plug & Play |
| Longitud: | 46 polzades |
| Material: | Plàstic |
| Item Weight (per 10-pack): | 20 lliures |
| GTIN: | 50046677476521 |
Descripció de la imatge: A close-up of the Philips LED tube, showing detailed specifications printed on the bulb itself. Information visible includes "14T5HE/46-850/IF1/G/DIM", "Use only with electronic ballasts", model numbers, and compliance marks like UL and RoHS.
Garantia i Suport
For warranty information or technical support regarding your Philips LED bulb, please refer to the official Signify (Philips) weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
Fabricant: Philips (Signify)
Número de peça: 476523
