Introducció
This manual provides essential information for the proper installation, operation, and maintenance of your Deaf Bonce Apocalypse AP-M61SE NEO 6.5-inch Mid-Range Speakers. Please read this manual thoroughly before attempting installation or operation to ensure optimal performance and safety. Retain this manual for future reference.
Producte acabatview
The Deaf Bonce Apocalypse AP-M61SE NEO speakers are high-performance 6.5-inch mid-range speakers designed to deliver superior sound clarity and dynamic audio output in car audio systems. Featuring Neodymium magnets, these speakers offer exceptional efficiency and power handling.
Característiques principals:
- Rendiment d'alta potència: 180W RMS and 360W max power handling for consistent and dynamic audio output.
- Superior Mid-Range Clarity: Optimized for frequencies between 100 Hz – 15,500 Hz, delivering crisp vocals and instruments.
- Neodymium Magnet Design: Lightweight yet powerful, providing exceptional efficiency and sound quality.
- Sensibilitat millorada: SPL of 104.50 dB ensures loud, distortion-free audio.
- Impedància de 4 ohms: Compatible with a wide range of car audio systems for seamless integration.
Image 1: A pair of Deaf Bonce Apocalypse AP-M61SE NEO 6.5-inch mid-range speakers, showcasing their design and size.
Especificacions
| Característica | Especificació |
|---|---|
| Model | AP-M61SE NEO |
| Tipus | Gamma mitjana |
| Mida | 6.5 polzades |
| Resposta de freqüència | 100 Hz - 15,500 Hz |
| Quantitat de paquet | Pair (2 speakers) |
| Mida de la bobina de veu | 1.25 polzades |
| Material del con | Paper |
| Tipus d'imant | Neodimi |
| Fil de la bobina de veu | CCAW |
| Gestió de potència RMS | 180 W |
| Maneig de potència màxima | 360 W |
| Material del marc | Acer |
| Impedància | 4 ohms |
| Sensibilitat (SPL) | 104.50 dB |
| Freqüència de ressonància (Fs) | 102.00 Hz |
| Qts | 0.29 |
| Vas | 8.76 L |
| Profunditat de muntatge | 70.1 mm / 2.76 polzades |
| Dimensió de retall | 154.26 mm / 6.07 polzades |
| Pes de l'article | 5.7 lliures (parell) |
| Dimensions del paquet | 15.59 x 8.27 x 3.7 polzades |
Informació de seguretat
- Always disconnect the vehicle's battery before starting any electrical work to prevent short circuits and electrical shock.
- Assegureu-vos que tot el cablejat estigui correctament aïllat i fixat per evitar danys per vibracions o abrasió.
- Do not operate speakers beyond their rated power handling (RMS) to avoid damage.
- Els nivells alts de pressió sonora poden causar danys auditius permanents. Aneu amb compte en ajustar el volum.
- Consulteu un instal·lador professional d'àudio per a cotxes si no teniu clar quins passos d'instal·lació.
Instal·lació i Configuració
Proper installation is crucial for optimal performance and longevity of your speakers. It is highly recommended that installation be performed by a qualified professional car audio technician.
Eines i materials necessaris:
- Pelafils/enganxadores
- Joc de tornavís
- Drill (with appropriate bit for mounting holes, if needed)
- Speaker wire (appropriate gauge for your system)
- Connectors (spade, ring terminals, etc.)
- Mounting hardware (screws, clips - typically included)
- Multimeter (for checking impedance and continuity)
Passos d'instal·lació:
- Desconnecta la bateria: Before starting, disconnect the negative terminal of your vehicle's battery.
- Elimina els altaveus existents: Carefully remove the factory speakers from their mounting locations.
- Preparació de la ubicació de muntatge: Ensure the mounting surface is clean and free of obstructions. Verify that the cut-out dimension (154.26 mm / 6.07 inches) and mounting depth (70.1 mm / 2.76 inches) are suitable for the AP-M61SE NEO speakers.
- Cablejat: Connect the speaker wires to the terminals on the AP-M61SE NEO speakers. Ensure correct polarity (+ to + and - to -) from the amplifier or head unit. Incorrect polarity will result in poor sound quality and reduced bass response.
- Altaveus de muntatge: Securely mount the speakers into their designated locations using the provided mounting hardware. Do not overtighten screws.
- Torneu a connectar la bateria: Once all speakers are installed and wired, reconnect the vehicle's battery.
- Sistema de prova: Turn on your car audio system and test the speakers at a low volume. Gradually increase the volume to ensure proper operation and sound quality.
Imatge 2: posterior view of the AP-M61SE NEO speaker, highlighting the Neodymium magnet and wiring terminals.
Consideracions sobre el cablejat:
The AP-M61SE NEO speakers have a 4-Ohm impedance. Ensure your amplifier is stable at this impedance. When wiring multiple speakers, calculate the total impedance to match your amplifier's capabilities. For parallel wiring, the total impedance will decrease; for series wiring, it will increase.
Image 3: Contents of the speaker package, including the two speakers, mounting rings, and wiring accessories.
Instruccions de funcionament
Once installed, your Deaf Bonce Apocalypse AP-M61SE NEO speakers are ready for use. Follow these guidelines for optimal performance:
- Reproducció inicial: Begin playback at a low volume level.
- Període d'entrada: Allow a break-in period of approximately 10-20 hours of normal listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.
- Control de volum: Avoid excessive volume levels that cause audible distortion. Distortion indicates that the amplifier or speakers are being overdriven, which can lead to damage.
- Configuració de crossover: Si s'utilitza un extern amplifier with crossover settings, ensure they are properly configured to protect the mid-range speakers from frequencies outside their optimal range (100 Hz – 15,500 Hz). A high-pass filter (HPF) set around 100-120 Hz is generally recommended.
Manteniment
The Deaf Bonce Apocalypse AP-M61SE NEO speakers require minimal maintenance to ensure long-lasting performance.
- Neteja: Gently wipe the speaker cones and surrounds with a soft, dry cloth to remove dust. Avoid using harsh chemicals or excessive moisture.
- Inspecció: Periodically inspect the speaker surrounds and cone for any signs of damage or wear. Check wiring connections for tightness and corrosion.
- Factors ambientals: Protect speakers from extreme temperatures, direct sunlight, and excessive moisture, which can degrade materials over time.
Resolució de problemes
Si teniu problemes amb els altaveus, consulteu els problemes i solucions més comuns següents:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so de l'altaveu | Cablejat solt o desconnectat; polaritat incorrecta; amplifier not powered; damaged speaker. | Comproveu totes les connexions del cablejat per assegurar-vos que estiguin ben ajustades i que la polaritat sigui correcta. amplifier is on and receiving power. Test speaker with a known good source or replace if damaged. |
| So distorsionat | Volum massa alt; amplifier clipping; incorrect crossover settings; damaged speaker. | Redueix el volum. Comprova. amplifier gain settings to prevent clipping. Verify crossover settings are appropriate for mid-range speakers. Inspect speaker for physical damage. |
| Greus febles o inexistents | Incorrect polarity; phase issues; high-pass filter set too high. | Check speaker wiring for correct polarity. Ensure all speakers are in phase. Adjust high-pass filter (HPF) to a lower frequency if necessary, or disable if full-range signal is desired (though not recommended for mid-range). |
| So intermitent | Loose connections; faulty wiring; ampmode de protecció del lifizer. | Inspect all wiring for loose connections or frayed wires. Check amplifier status indicators for protection mode. |
Garantia i Suport
Deaf Bonce products are manufactured to high-quality standards and are covered by a limited warranty. Please refer to the warranty card included with your purchase or visit the official Deaf Bonce weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia.
For technical support, installation assistance, or warranty claims, please contact your authorized Deaf Bonce dealer or the manufacturer's customer service department. Keep your purchase receipt as proof of purchase.
Fabricant: Bonce sord
Model: AP-M61SE NEO
ASIN: B0DQLSJHT8